Home > Plastics > Materials > Ultramid® > Ultramid® C40 L 01 - Datasheet

Ultramid® C40 L 01 Datasheet

Polyamide 66/6 Copolymer

Supplied by BASF Corporation

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
Ultramid C40 L 01 us a lubricated copolymer PA6/66 grade of high viscosity for the production of monofilaments and blown film. Ultramid C40 L 01 is well suited for the production of high transparency, nonsymetic blown film with reduced curl. It's very low melting point compared to standard PA6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Lubricant
Features 
  • Copolymer
  • High Clarity
  • High Viscosity
  • Lubricated
 
Uses 
  • Film
  • Monofilaments
 
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Apparent Density
g/cm³
 
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Viscosity Number (96% H2SO4 (Sulphuric Acid))
cm³/g
ISO 307
Moisture Content
%
ISO 15512
Relative Viscosity - 1% in 96% Sulfuric Acid
 
ISO 307
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
ISO 3146
Additional Information
Nominal Value
Unit
Test Method
Pellet Shape
 
 
Pellet Size
mil
 
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: High Viscosity, High Clarity.
Uses
Uses may also be described by the following terms: Monofilaments, Monofilament.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Available Documents
Processing - Injection Molding (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.