Home > Plastics > Materials > Makroblend® > Makroblend® UT235 M - Datasheet

Makroblend® UT235 M Datasheet

Polycarbonate + PET

15% Filler

Supplied by Bayer MaterialScience - Polycarbonates

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
(PC+PET)-blend, mineral filled, easy flow, low coefficient of linear thermal expansion, easy release, injection molding. Molded parts from UT235M having exceptional dimensional stability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Filler, 15% Filler by Weight
Features 
  • Good Dimensional Stability
  • Good Flow
  • Good Mold Release
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density (73°F)
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (270°C/5.0 kg)
in³/10min
ISO 1133
Molding Shrinkage 2
    ISO 2577
Across Flow : 518°F, 0.118 in
%
 
Flow : 518°F, 0.118 in
%
 
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2/1
Tensile Stress
    ISO 527-2/5
Yield, 73°F
psi
 
Break, 73°F
psi
 
Tensile Strain
    ISO 527-2/5
Yield, 73°F
%
 
Break, 73°F
%
 
Flexural Modulus 3 (73°F)
psi
ISO 178
Flexural Stress 3
    ISO 178
3.5% Strain, 73°F
psi
 
73°F
psi
 
Flexural Strain at Flexural Strength 4 (73°F)
%
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Unnotched Izod Impact Strength
    ISO 180
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Multi-Axial Instrumented Impact Energy (73°F)
ft·lb
ISO 6603-2
Multi-Axial Instrumented Impact Peak Force (73°F)
lbf
ISO 6603-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B120
CLTE
    ISO 11359-2
Flow : 73 to 185°F
in/in/°F
 
Transverse : 73 to 185°F
in/in/°F
 
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Good Flow, Good Mold Release, Easy Release, Good Demolding.
Available Documents
Technical Datasheet (Chinese (Traditional))
Technical Datasheet (Chinese)
Technical Datasheet (English)
Technical Datasheet (German)
Notes
1Typical properties: these are not to be construed as specifications.
2150x105x3 mm, 70°C MT, 600 bar
30.079 in/min
42 mm/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.