Home > Plastics > Materials > Ingeo™ > Ingeo™ 4060D - Datasheet

Ingeo™ 4060D Datasheet

Polylactic Acid

Supplied by NatureWorks® LLC

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
Ingeo 4060D, a product from NatureWorks LLC, can be coextruded with other Ingeo resin to form a sealant layer for biaxially oriented Ingeo film. This resin has excellent heat seal and hot tack performance with a seal initiation temperature of 80°C. This sealant does not adversely affect the unique properties of Ingeo bixially oriented film such as high gloss and transparency, dead-fold or aroma and grease barrier.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Biodegradable
  • Deadfold and Twist Retention
  • Food Contact Acceptable
  • Good Heat Seal
  • Grease Resistant
  • High Gloss
  • Renewable Resource Content
Uses 
  • Bi-axially Oriented Film
  • Sealants
 
Agency Ratings 
 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Coextrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Films
Nominal Value
Unit
Test Method
Seal Initiation Temperature
°F
ASTM F88
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature
°F
ASTM D3417
Optical
Nominal Value
Unit
Test Method
Gloss (20°)
 
ASTM D1003
Haze
%
ASTM D1003
Features
Features may also be described by the following terms: High Gloss, Deadfold Retention, Twist Retention, Deadfold and Twist Retention, Good Heat Seal, Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
Uses
Uses may also be described by the following terms: Bi-axially Oriented Film, Biaxially Oriented Film.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Adapter Temperature
°F
 
Melt Temperature
°F
 
Die Temperature
°F
 
Extrusion Notes
Screw Speed: 20-100 rpm
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.