Home > Plastics > Materials > LAPEROS® > LAPEROS® S475 - Datasheet

LAPEROS® S475 Datasheet

Liquid Crystal Polymer

30% Glass\Mineral

Supplied by Polyplastics Co., Ltd.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
Ultra-High Heat Resistant, High T Stiffness, Low warpage
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass\Mineral, 30% Filler by Weight
Features 
  • High Heat Resistance
  • High Stiffness
  • Low Warpage
UL File Number 
  • E106764
Part Marking Code (ISO 11469)
  • >LCP-(MD+GF)30<
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage 2
    Internal Method
Across Flow : 0,0394 in
%
 
Flow : 0,0394 in
%
 
Water Absorption (73°F, 24 hr)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ISO 178
Flexural Stress
psi
ISO 178
Flexural Strain
%
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
IEC 60093
Electric Strength
    IEC 60243-1
0,0394 in
V/mil
 
0,118 in
V/mil
 
Dielectric Constant
    IEC 60250
1 kHz
 
 
1 MHz
 
 
Dissipation Factor
    IEC 60250
1 kHz
 
 
1 MHz
 
 
Arc Resistance
sec
 
Comparative Tracking Index
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
Additional Information
Nominal Value
Unit
Test Method
Color Number
 
 
Related Terminology
This supplier and product may also be known by these terms: WinTech Polymer Ltd.
Features
Features may also be described by the following terms: High Heat Resistance, High Stiffness, Low Warpage, Low Warp.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
280x80x1 mm; Inj. Pressure 60MPa
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.