Home > Plastics > Materials > Iupital® > Iupital® F20-03 - Datasheet

Iupital® F20-03 Datasheet

Acetal (POM) Copolymer

Supplied by Mitsubishi Engineering-Plastics Corp

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
Iupital® F20-03 is an Acetal (POM) Copolymer material. It is available in Asia Pacific, Europe, or North America for injection molding.

Important attributes of Iupital® F20-03 are:
  • Flame Rated
  • Medium Viscosity

Typical application of Iupital® F20-03: Automotive
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Medium Viscosity
Automotive Specifications 
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
ISO 1133
Molding Shrinkage - Flow (0,118 in)
%
 
Water Absorption 2 (Equilibrium, 73°F, 50% RH)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Yield)
%
ISO 527-2
Nominal Tensile Strain at Break
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Stress
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Melting Temperature
°F
ISO 11357-3
CLTE
    ISO 11359-2
Flow
in/in/°F
 
Transverse
in/in/°F
 
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Electric Strength
    IEC 60243-1
0,0394 in
V/mil
 
0,118 in
V/mil
 
Relative Permittivity
    IEC 60250
100 Hz
 
 
1 MHz
 
 
Dissipation Factor
    IEC 60250
100 Hz
 
 
1 MHz
 
 
Comparative Tracking Index
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0,0315 in)
 
UL 94
Related Terminology
This supplier and product may also be known by these terms: Lupital, Jupital
Features
Features may also be described by the following terms: Medium Viscosity.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (2).
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Injection Rate
 
 
Screw Speed
rpm
 
Notes
1Typical properties: these are not to be construed as specifications.
260% RH
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.