Home > Plastics > Materials > STYRON A-TECH™ > STYRON A-TECH™ 1170 - Datasheet

STYRON A-TECH™ 1170 Datasheet

High Impact Polystyrene

Supplied by Americas Styrenics LLC

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
STYRON A-TECH™ 1170 is a High Impact Polystyrene material. It is available in Latin America or North America for extrusion or injection molding.

Important attributes of STYRON A-TECH™ 1170 are:
  • Flame Rated
  • Food Contact Acceptable
  • Good Processability
  • Impact Resistant

Typical applications include:
  • Appliances
  • Food Contact Applications
  • Sheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
 
Features 
  • Food Contact Acceptable
  • Good Colorability
  • Good Impact Resistance
  • Good Processability
 
Uses 
  • Appliances
  • Sheet
 
Agency Ratings 
UL File Number 
  • E326906
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
ASTM D1238
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
ASTM D638
Tensile Strength
    ASTM D638
Break, Injection Molded
psi
 
Injection Molded
psi
 
Tensile Elongation (Break, Injection Molded)
%
ASTM D638
Flexural Modulus (Injection Molded)
psi
ASTM D790
Flexural Strength (Injection Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
73°F, Compression Molded
ft·lb/in
 
73°F, Injection Molded
ft·lb/in
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Vicat Softening Temperature
°F
ASTM D1525
CLTE - Flow
in/in/°F
ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
Features
Features may also be described by the following terms: Good Impact Resistance, Good Processability, Easy Processing, Good Colorability.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Technical Datasheet (English)
Technical Datasheet (Spanish)
Injection
Nominal Value
Unit
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Back Pressure
psi
 
Cushion
in
 
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Adapter Temperature
°F
 
Melt Temperature
°F
 
Die Temperature
°F
 
Extrusion Notes
Zone 6 Temperature: 204 to 221°C
Melt Pump, Pipes, Screen Changer Temperature: 193 to 232°C
Polish Rolls Temperature: 66 to 104°C
Head Pressure: 10 to 21 MPa
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.