Home > Plastics > Materials > Propafilm™ > Propafilm™ GLP100 - Datasheet

Propafilm™ GLP100 Datasheet

Polypropylene Alloy

Supplied by Innovia Films Ltd.

View Complete Data Sheet Search 94000+ Data Sheets
Create Your Free Account! or Login
Product Description
High Speed Overwraping Film with Shrink Tightening Properties

Biaxially oriented polypropylene (BOPP) film co-extruded on both sides with heat sealable polyolefinic copolymers.

GLP80/100 are suitable for use in the tobacco industry for both high speed and display outers where exceptional pack appearance and wrap tightness are required.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Excellent Printability
  • Flavor & Aroma Barrier
  • Food Contact Acceptable
  • Moisture Barrier
  • Slip
  • Solvent Resistant
Uses 
  • Packaging
Agency Ratings 
 
Forms 
  • Film
Processing Method 
  • Coextrusion
Physical
Nominal Value
Unit
Test Method
Molding Shrinkage
    Internal Method
Flow : 176°F, 1 min
in/in
 
Flow : 248°F, 1 min
in/in
 
Across Flow : 176°F, 1 min
in/in
 
Across Flow : 248°F, 1 min
in/in
 
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
    ASTM D1894
vs. Itself - Dynamic, Outside/Outside
 
 
vs. Itself - Static, Outside/Outside
 
 
Films
Nominal Value
Unit
Test Method
Secant Modulus 2
    ASTM D882
1% Secant, MD
psi
 
1% Secant, TD
psi
 
Tensile Strength 3
    ASTM D882
MD : Yield
psi
 
TD : Yield
psi
 
Tensile Elongation 3
    ASTM D882
MD : Break
%
 
TD : Break
%
 
Seal Strength 4
lbf/in
Internal Method
Seal Initiation Temperature 5
°F
Internal Method
Oxygen Permeability (73°F, 0% RH)
cm³·mil/100in²/atm/24 hr
ASTM F1927
Water Vapor Transmission Rate
    ASTM F1770
73°F, 85% RH
g/100 in²/24 hr
 
100°F, 90% RH
g/100 in²/24 hr
 
Blocking Load 6
g
Internal Method
Film Gauge
 
Internal Method
Yield
in²/lb
Internal Method
Optical
Nominal Value
Unit
Test Method
Gloss (20°)
 
ASTM D2457
Haze 7
%
ASTM D1003
Features
Features may also be described by the following terms: Excellent Printability, Printable, Slip, Unspecified Slip, Flavor & Aroma Barrier, Flavor Barrier, Aroma Barrier, Flavor and Aroma Barrier, Moisture Barrier.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
210%/min
350%/min
4228°F; 1sec; 15lb/in²
52secs; 15lb/in²
6158°F; 200g; 2hrs
7Wide angle; 2.5°
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.