Home > Plastics > Materials > RELENE® > RELENE® HD50MA180 - Datasheet

RELENE® HD50MA180 Datasheet

High Density Polyethylene

Supplied by Reliance Industries Limited

View Complete Data Sheet Search 98000+ Data Sheets
Create Your Free Account! or Login
Product Description
HD50MA180 is a high flow High Density Polyethylene (HDPE) grade. This grade is specially formulated to manufacture large, intricate, thin walled multi cavity injection moulded products. It has narrow molecular weight distribution, which makes it easier to process and products manufactured have good gloss and rigidity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • High Flow
  • High Gloss
  • High Rigidity
  • Narrow Molecular Weight Distribution
Uses 
  • Household Goods
  • Thin-walled Parts
 
Agency Ratings 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Injection Molded)
psi
ASTM D638
Tensile Elongation (Break, Injection Molded)
%
ASTM D638
Flexural Modulus (Injection Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (Injection Molded)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, High Gloss, High Rigidity, High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Household Goods, Housewares.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.