Home > Plastics > Materials > TEDUR® > TEDUR® L 9510-5 - Datasheet

TEDUR® L 9510-5 Datasheet

Polyphenylene Sulfide

40% Glass Fiber

Supplied by ALBIS PLASTIC GmbH

View Complete Data Sheet Search 94000+ Data Sheets
Create Your Free Account! or Login
Product Description
TEDUR® L 9510-5 is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of TEDUR® L 9510-5 include engineering/industrial parts and housings.

Characteristics include:
  • Flame Rated
  • High Flow
  • High Stiffness
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber, 40% Filler by Weight
Features 
  • High Flow
  • High Stiffness
 
Uses 
  • Housings
  • Pump Parts
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Stress
psi
ISO 178
Flexural Strain at Flexural Strength
%
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Comparative Tracking Index
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating
    UL 94
0.0295 in
 
 
0.0591 in
 
 
0.118 in
 
 
Glow Wire Flammability Index (0.0787 in)
°F
IEC 60695-2-12
Features
Features may also be described by the following terms: High Stiffness, High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Housings, Housing.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.