Home > Plastics > Materials > Telcar® > Telcar® TL-2560F - Datasheet

Telcar® TL-2560F Datasheet

Thermoplastic Elastomer

Supplied by Teknor Apex Company

View Complete Data Sheet Search 112000+ Data Sheets
Create Your Free Account! or Login
Product Description
Telcar TL-2560F is a general purpose, high density thermoplastic elastomer designed for injection molding applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Filled
  • General Purpose
  • Good Colorability
  • High Density
  • High Flow
  • High Specific Gravity
  • Medium Hardness
  • Oil Extended
Uses 
  • General Purpose
  • Grommets
  • Industrial Applications
  • Industrial Parts
 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Molding Shrinkage
    ISO 294-4
Across Flow
%
 
Flow
%
 
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
ASTM D412
Tensile Elongation (Break)
%
ASTM D412
Tear Strength
    ASTM D624
Across Flow
lbf/in
 
Flow
lbf/in
 
Compression Set
    ASTM D395
73°F, 22 hr
%
 
158°F, 22 hr
%
 
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240
Features
Features may also be described by the following terms: Good Colorability, High Density, High Specific Gravity, Oil Extended, High Flow, High Melt, High MFI, Medium Hardness, High Specific Gravity, High Density.
Uses
Uses may also be described by the following terms: Industrial Parts.
Available Documents
Technical Datasheet
Injection
Nominal Value
Unit
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Injection Rate
 
 
Back Pressure
psi
 
Screw Speed
rpm
 
Cushion
in
 
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Die Temperature
°F
 
Extrusion Notes
Screw Speed: 30 to 100 rpm
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2015. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.