Home > Plastics > Materials > Delrin® > Delrin® 300PE NC010 - Datasheet

Delrin® 300PE NC010 Datasheet

ACETAL RESIN

Supplied by DuPont Performance Polymers

View Complete Data Sheet Search 115000+ Data Sheets
Create Your Free Account! or Login
Product Description
Medium-high Viscosity Acetal Homopolymer with Very Low Emissions
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Mold Release
Automotive Specifications 
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Part Marking Code (ISO 11469)
  • >POM<
Resin ID (ISO 1043)
  • POM
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Yield)
%
ISO 527-2
Nominal Tensile Strain at Break
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Melting Temperature 2
°F
ISO 11357-3
CLTE
    ISO 11359-2
Flow
in/in/°F
 
Transverse
in/in/°F
 
Additional Information
Nominal Value
Unit
Test Method
Emission
mg/kg
VDA 275
Related Terminology
This supplier and product may also be known by these terms: Derlin
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1), IMDS (1).
Available Documents
Processing - Injection Molding (English)
Typical Processing for DuPont Engineering Polymers (English)
White Paper - Property Advantages of Delrin® Acetal Homopolymer - a guide for design engineers (English)
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.