Home > Plastics > Materials > Badamid® > Badamid® B70 GF30 - Datasheet

Badamid® B70 GF30 Datasheet

Polyamide 6

30% Glass Fiber

Supplied by Bada AG

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
Polyamide 6 injection moulding standard grade with 30% of glass fibre reinforcement.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183
Water Absorption
      ISO 62
Saturation, 73°F
--
%
 
Equilibrium, 73°F, 50% RH
--
%
 
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2/1
Tensile Stress 2 (Break, 73°F)
psi
ISO 527-2/5
Tensile Strain 2 (Break, 73°F)
%
ISO 527-2/5
Flexural Stress 3 (73°F)
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength 3
      ISO 179/1eA
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength 3
      ISO 179/1eU
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Notched Izod Impact Strength 3
      ISO 180/1A
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature 4
       
66 psi, Unannealed
--
°F
ISO 75-2/B
264 psi, Unannealed
--
°F
ISO 75-2/A
Melting Temperature (DSC) 5
--
°F
ISO 3146
CLTE
      DIN 53752
Flow
--
in/in/°F
 
Transverse
--
in/in/°F
 
Maximum Service Temperature
      IEC 216
20000 hrs
--
°F
 
some hours
--
°F
 
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity 6
ohm
IEC 60093
Volume Resistivity 6
ohm·cm
IEC 60093
Relative Permittivity 6
 
IEC 60250
Dissipation Factor (1 MHz)
 
IEC 60250
Comparative Tracking Index
--
V
IEC 60112
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating
      UL 94
0,0315 in 7
--
 
 
0,0630 in 8
--
 
 
Generic Name
Dry
Generic Name may also be described by the following terms: PA6.
Conditioned
Generic Name may also be described by the following terms: PA6.
Available Documents
Dry
Technical Datasheet (English)
Conditioned
Technical Datasheet (English)
Injection
Dry
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Test Specimen accordng to ISO 3167, Type A
380x10x4 mm
4110x10x4 mm
510 K/min, Compound for moulding
680x80x1 mm
7125x13x0.8 mm
8125x13x1.6 mm
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.