Home > Plastics > Materials > CYCOLOY™ > CYCOLOY™ C1200HF resin - Datasheet

CYCOLOY™ C1200HF resin Datasheet

Polycarbonate + ABS

Supplied by SABIC Innovative Plastics

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
CYCOLOY™ 
C1200HF resin
PC+ABS, excellent flow/impact/high heat resistance. Low temperature ductility. For automotive, appliance and electrical components.
CYCOLOY™ 
C1200HF resin
CYCOLOY C1200HF is the improved version of CYCOLOY C1200 and has been developed to provide enhanced productivity and surface appearance for
CYCOLOY™ 
C1200HF resin
PC+ABS, excellent flow/impact/high heat resistance. Low temperature ductility. For automotive, appliance and electrical components.
General CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
Material Status 
  • Commercial: Active
  • Commercial: Active
  • Commercial: Active
Availability 
  • North America
  • Europe
  • Asia Pacific
Features 
  • Ductile
  • Good Flow
  • Good Impact Resistance
  • High Heat Resistance
  • Pleasing Surface Appearance
  • Ductile
  • Good Flow
  • Good Impact Resistance
  • High Heat Resistance
Uses 
  • Appliance Components
  • Automotive Applications
  • Electrical/Electronic Applications
--
  • Appliance Components
  • Automotive Applications
  • Electrical/Electronic Applications
RoHS Compliance 
--
--
Automotive Specifications 
Processing Method 
  • Injection Molding
  • Injection Molding
  • Injection Molding
Multi-Point Data 
  • Coefficient of Thermal Expansion vs. Temperature (ASTM E831)
  • Elastic Modulus vs Temperature (ASTM D4065)
  • Flexural DMA (ASTM D4065)
  • Instrumented Impact (Energy) (ASTM D3763)
  • Instrumented Impact (Load) (ASTM D3763)
  • Pressure-Volume-Temperature (PVT - Zoller Method)
  • Shear DMA (ASTM D4065)
  • Specific Heat vs. Temperature (ASTM D3417)
  • Tensile Creep (ASTM D2990)
  • Tensile Fatigue
  • Tensile Stress vs. Strain (ASTM D638)
  • Thermal Conductivity vs. Temperature (ASTM E1530)
  • Viscosity vs. Shear Rate (ASTM D3835)
--
--
Physical CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
Unit
Test Method
Specific Gravity
         
--
--
 
ASTM D792
--
--
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)
--
g/10 min
ASTM D1238
Melt Volume-Flow Rate (MVR)
        ISO 1133
260°C/2.16 kg
--
--
in³/10min
 
260°C/5.0 kg
--
--
in³/10min
 
265°C/5.0 kg
--
--
in³/10min
 
Molding Shrinkage - Flow
        Internal Method
-- 2
--
--
in/in
 
0,126 in
--
in/in
 
Water Absorption
        ISO 62
Saturation, 73°F
--
--
%
 
Equilibrium, 73°F, 50% RH
--
--
%
 
Mechanical CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
Unit
Test Method
Tensile Modulus
         
-- 3
--
psi
ASTM D638
--
--
psi
ISO 527-2/1
Tensile Strength
         
Yield 4
--
psi
ASTM D638
Yield
--
--
psi
ISO 527-2/5
Yield
--
psi
ISO 527-2/50
Break
--
--
psi
ISO 527-2/5, ISO 527-2/50
Tensile Elongation
         
Yield 4
--
%
ASTM D638
Yield
--
--
%
ISO 527-2/5
Yield
--
%
ISO 527-2/50
Break 4
--
%
ASTM D638
Break
--
--
%
ISO 527-2/5
Break
--
%
ISO 527-2/50
Flexural Modulus
         
1,97 in Span 5
--
psi
ASTM D790
--
--
--
psi
ISO 178
-- 6
--
--
psi
ISO 178
Flexural Stress
         
--
--
--
psi
ISO 178
-- 6, 7
--
--
psi
ISO 178
Yield, 1,97 in Span 5
--
psi
ASTM D790
Taber Abrasion Resistance (1000 Cycles, 1000 g, CS-17 Wheel)
--
--
mg
Internal Method
Impact CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
Unit
Test Method
Charpy Notched Impact Strength
        ISO 179/1eA
-22°F 8
--
--
ft·lb/in²
 
-22°F 9
--
--
ft·lb/in²
 
73°F 8
--
--
ft·lb/in²
 
73°F 9
--
--
ft·lb/in²
 
Charpy Unnotched Impact Strength 8
        ISO 179/1eU
-22°F
--
--
 
 
73°F
--
--
 
 
Notched Izod Impact
         
-22°F
--
ft·lb/in
ASTM D256
73°F
--
ft·lb/in
ASTM D256
-22°F 10
--
--
ft·lb/in²
ISO 180/1A
-22°F 11
--
--
ft·lb/in²
ISO 180/1A
-22°F 12
--
--
ft·lb/in²
ISO 180/1A
73°F 10
--
--
ft·lb/in²
ISO 180/1A
73°F 11
--
--
ft·lb/in²
ISO 180/1A
73°F 12
--
--
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact Strength 10
        ISO 180/1U
-22°F
--
--
 
 
73°F
--
--
 
 
Instrumented Dart Impact
        ASTM D3763
-22°F, Total Energy
--
in·lb
 
73°F, Total Energy
--
in·lb
 
Hardness CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
Unit
Test Method
Rockwell Hardness (R-Scale)
--
--
 
ISO 2039-2
Ball Indentation Hardness (H 358/30)
--
--
psi
ISO 2039-1
Thermal CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
Unit
Test Method
Deflection Temperature Under Load
         
66 psi, Unannealed, 0,126 in
--
°F
ASTM D648
66 psi, Unannealed, 3,94 in Span 13
--
--
°F
ISO 75-2/Be
66 psi, Unannealed, 2,52 in Span 14
--
--
°F
ISO 75-2/Bf
264 psi, Unannealed, 0,126 in
--
°F
ASTM D648
264 psi, Unannealed, 3,94 in Span 13
--
--
°F
ISO 75-2/Ae
264 psi, Unannealed, 2,52 in Span 14
--
--
°F
ISO 75-2/Af
Vicat Softening Temperature
         
--
°F
ISO 306/B50
--
--
--
°F
ISO 306/B120
Ball Pressure Test (257°F)
--
--
 
IEC 60695-10-2
CLTE
         
Flow : -40 to 104°F
--
in/in/°F
ASTM E831
Flow : -40 to 104°F
--
--
in/in/°F
ISO 11359-2
Transverse : -40 to 104°F
--
--
in/in/°F
ISO 11359-2
Thermal Conductivity
--
--
Btu·in/hr/ft²/°F
ISO 8302
RTI Elec
°F
UL 746
RTI Imp
°F
UL 746
RTI Str
°F
UL 746
Electrical CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
Unit
Test Method
Surface Resistivity
--
--
ohm
IEC 60093
Volume Resistivity
--
--
ohm·cm
IEC 60093
Electric Strength
        IEC 60243-1
0,0315 in, in Oil
--
--
V/mil
 
0,0630 in, in Oil
--
--
V/mil
 
0,126 in, in Oil
--
--
V/mil
 
Relative Permittivity
        IEC 60250
50 Hz
--
--
 
 
60 Hz
--
--
 
 
1 MHz
--
--
 
 
Dissipation Factor
        IEC 60250
50 Hz
--
--
 
 
60 Hz
--
--
 
 
1 MHz
--
--
 
 
Comparative Tracking Index (CTI)
 
UL 746
Comparative Tracking Index
--
--
V
IEC 60112
High Amp Arc Ignition (HAI)
--
 
UL 746
Hot-wire Ignition (HWI)
--
 
UL 746
Flammability CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
Unit
Test Method
Flame Rating
        UL 94
0,0469 in
--
 
 
0,0472 in
--
--
 
 
0,118 in
--
--
 
 
Glow Wire Flammability Index (0,0394 in)
--
--
°F
IEC 60695-2-12
Oxygen Index
--
--
%
ISO 4589-2
Related Terminology
CYCOLOY™ 
C1200HF resin
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland, Cycloy
CYCOLOY™ 
C1200HF resin
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics, Cycloy
CYCOLOY™ 
C1200HF resin
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, Cycloy
Features
CYCOLOY™ 
C1200HF resin
Features may also be described by the following terms: Good Impact Resistance, High Heat Resistance, Good Flow.
CYCOLOY™ 
C1200HF resin
Features may also be described by the following terms: Pleasing Surface Appearance.
CYCOLOY™ 
C1200HF resin
Features may also be described by the following terms: High Heat Resistance, Good Impact Resistance, Good Flow.
Uses
CYCOLOY™ 
C1200HF resin
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Appliance Components, Appliance Parts.
CYCOLOY™ 
C1200HF resin
Uses may also be described by the following terms: Appliance Components, Appliance Parts, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
Automotive Specifications
CYCOLOY™ 
C1200HF resin
This plastic material has approval for 5 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (5).
CYCOLOY™ 
C1200HF resin
This plastic material has approval for 9 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): VAG (1), FORD (5), OPEL (1), BMW (1), PSA Peugeot-Citroën (1).
CYCOLOY™ 
C1200HF resin
This plastic material has approval for 5 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (5).
Available Documents
CYCOLOY™ 
C1200HF resin
Technical Datasheet
CYCOLOY™ 
C1200HF resin
Technical Datasheet
CYCOLOY™ 
C1200HF resin
Technical Datasheet
Injection CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
CYCOLOY™ 
C1200HF resin
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Drying Time, Maximum
hr
 
Suggested Max Moisture
%
 
Suggested Shot Size
%
 
Hopper Temperature
°F
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Screw Speed
rpm
 
Vent Depth
in
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
32,0 in/min
4Type I, 2,0 in/min
50,051 in/min
60,079 in/min
7Yield
880*10*3 sp=62mm
980*10*4 sp=62mm
1080*10*3
1180*10*4mm, Cut
1280*10*4
13120*10*4 mm
1480*10*4 mm
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.