Home > Plastics > Materials > Miramid® > Miramid® VE30CW - Datasheet

Miramid® VE30CW Datasheet

Polyamide 6

30% Glass Fiber

Supplied by BASF Leuna GmbH

View Complete Data Sheet Search 94000+ Data Sheets
Create Your Free Account! or Login
Product Description
Miramid® VE30CW is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Europe for injection molding.

Important attributes of Miramid® VE30CW are:
  • Chemical Resistant
  • Crystalline
  • Fast Molding Cycle
  • Good Stiffness
  • Heat Resistant

Typical applications include:
  • Automotive
  • Engineering/Industrial Parts
  • Construction Applications
  • Electrical/Electronic Applications
  • Handles
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Additive 
  • Heat Stabilizer
  • Mold Release
 
Features 
  • Crystalline
  • Fast Molding Cycle
  • Fuel Resistant
  • Good Flow
  • Good Stability
  • Good Stiffness
  • Grease Resistant
  • High Heat Resistance
  • High Rigidity
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Automotive Applications
  • Automotive Interior Trim
  • Building Materials
  • Electrical/Electronic Applications
  • Engineering Parts
  • Handles
  • Housings
  • Machine/Mechanical Parts
  • Sporting Goods
Forms 
  • Granules
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Shear Modulus vs. Temperature (ISO 11403-1)
Physical
Dry
Conditioned
Unit
Test Method
Density
--
lb/in³
ISO 1183 2
Melt Volume-Flow Rate (MVR) (275°C/5.0 kg)
--
in³/10min
ISO 1133
Water Absorption
      ISO 62 2
Saturation
--
%
 
Equilibrium
--
%
 
Viscosity number
--
cm³/g
ISO 307, 1157, 1628 2
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
psi
ISO 527-2 2
Tensile Stress (Break)
psi
ISO 527-2 2
Tensile Strain (Break)
%
ISO 527-2 2
Tensile Creep Modulus (1000 hr)
--
psi
ISO 899-1
Flexural Stress 3
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
      ISO 179/1eA 2
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy impact strength
      ISO 179/1eU 2
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
      ISO 75-2 2
66 psi
--
°F
 
264 psi
--
°F
 
Melting Temperature (DSC)
--
°F
ISO 3146
Electrical
Dry
Conditioned
Unit
Test Method
Volume resistivity
ohm·in
IEC 60093 2
Dielectric Constant (1 MHz)
 
IEC 60250
Dissipation Factor (1 MHz)
 
IEC 60250 2
Comparative tracking index
--
 
IEC 60112 2
Generic Name
Dry
Generic Name may also be described by the following terms: PA6.
Conditioned
Generic Name may also be described by the following terms: PA6.
Features
Dry
Features may also be described by the following terms: High Heat Resistance, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Flow, High Rigidity, Good Stability, Good Stiffness.
Uses
Dry
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Housings, Housing, Engineering Parts, Machine Parts, Mechanical Parts, Machine/Mechanical Parts.
Available Documents
Dry
Processing - Injection Molding (English)
Technical Datasheet (English)
Injection
Dry
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3Typical values for uncoloured product at 23°C
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.