Home > Plastics > Materials > Vydyne® > Vydyne® 21SPF - Datasheet

Vydyne® 21SPF Datasheet

Polyamide 66

Supplied by Ascend Performance Materials Operations LLC

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
Vydyne 21SPF is a general-purpose PA66 resin. Available in natural, it is designed principally for injection-molding fabrication. This grades offer a well-balanced combination of engineering properties characterized by high strength; rigidity; good toughness; high melt point; good surface lubricity; abrasion resistance and resistance to many chemicals, machine and motor oils, solvents and gasoline.

Vydyne 21SPF resin permits production of molded parts with good initial color plus good property and color retention when using regrind. This resin is recognized by Underwriters Laboratories and conforms to the requirements of many industrial, federal and military specifications for premium-quality, general-purpose PA66 resins.

Vydyne 21SPF resin is internally and externally lubricated for improved machine feed and exceptional mold release. It is intended for use in high-productivity applications. In many applications, the molding cycle can be reduced because parts may be removed from the cavity at higher temperatures. In difficult molds where parts have a tendency to stick in the cavity, Vydyne 21SPF can reduce or eliminate the need for mold release sprays. Critical molded part dimensions should be checked against specifications before implementing shorter molding cycles on a routine production basis.

Typical Applications/End Uses:
To come
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Lubricant
Features 
  • Fast Molding Cycle
  • Gasoline Resistance
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Mold Release
  • Good Toughness
  • High Rigidity
  • High Strength
  • Lubricated
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Bearings
  • Bushings
  • Cams
  • Connectors
  • Electrical Housing
  • Industrial Applications
Agency Ratings 
RoHS Compliance 
Automotive Specifications 
UL File Number 
  • E70062
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183
Molding Shrinkage
      ISO 294-4
Across Flow : 73°F, 0.0787 in
--
%
 
Flow : 73°F, 0.0787 in
--
%
 
Water Absorption
      ISO 62
73°F, 24 hr
--
%
 
Equilibrium, 73°F, 50% RH
--
%
 
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress
      ISO 527-2
Yield, 73°F
psi
 
Break, 73°F
psi
 
Tensile Strain (Yield, 73°F)
%
ISO 527-2
Nominal Tensile Strain at Break (73°F)
%
ISO 527-2
Flexural Modulus (73°F)
psi
ISO 178
Flexural Strength (73°F)
psi
ISO 178
Poisson's Ratio
--
 
ISO 527-2
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
      ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
      ISO 179/1eU
-22°F
 
 
73°F
 
 
Notched Izod Impact Strength
      ISO 180
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
       
66 psi, Unannealed
--
°F
ISO 75-2/B
264 psi, Unannealed
--
°F
ISO 75-2/A
Melting Temperature
--
°F
ISO 11357-3
CLTE
      ISO 11359-2
Flow : 73 to 131°F, 0.0787 in
--
in/in/°F
 
Transverse : 73 to 131°F, 0.0787 in
--
in/in/°F
 
RTI Elec
      UL 746
0.0157 in
--
°F
 
0.0280 in
--
°F
 
0.0591 in
--
°F
 
0.118 in
--
°F
 
RTI Imp
      UL 746
0.0157 in
--
°F
 
0.0280 in
--
°F
 
0.0591 in
--
°F
 
0.118 in
--
°F
 
RTI Str
      UL 746
0.0157 in
--
°F
 
0.0280 in
--
°F
 
0.0591 in
--
°F
 
0.118 in
--
°F
 
Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity (0.0295 in)
--
ohm·cm
IEC 60093
Dielectric Strength (0.0394 in)
--
V/mil
IEC 60243
Arc Resistance (0.118 in)
--
 
ASTM D495
Comparative Tracking Index (0.118 in)
--
V
IEC 60112
High Amp Arc Ignition (HAI)
      UL 746
0.0280 in
--
 
 
0.0591 in
--
 
 
0.118 in
--
 
 
High Voltage Arc Tracking Rate (HVTR)
--
 
UL 746
Hot-wire Ignition (HWI)
      UL 746
0.0280 in
--
 
 
0.0591 in
--
 
 
0.118 in
--
 
 
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating
      UL 94
0.0157 in
--
 
 
0.0280 in
--
 
 
0.0591 in
--
 
 
0.118 in
--
 
 
Glow Wire Flammability Index
      IEC 60695-2-12
0.0280 in
--
°F
 
0.0591 in
--
°F
 
0.118 in
--
°F
 
Glow Wire Ignition Temperature
      IEC 60695-2-13
0.0280 in
--
°F
 
0.0591 in
--
°F
 
0.118 in
--
°F
 
Oxygen Index
--
%
ISO 4589-2
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Good Mold Release, Easy Release, Good Demolding, Good Chemical Resistance, Chemical Resistant, Good Abrasion Resistance, Abrasion Resistant, Good Toughness, Tough, High Strength, High Rigidity, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Uses
Dry
Uses may also be described by the following terms: Electrical Housings, Electrical Housing.
Automotive Specifications
Dry
This plastic material has approval for 11 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (2), FORD (2), FEDERAL (1), ASTM (2), GM (2), SAE (2).
Agency Ratings
Dry
This plastic material has 5 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ASTM (2), MIL (1), FDA (1), FED (1).
Available Documents
Dry
Technical Datasheet
Conditioned
Technical Datasheet
Injection
Dry
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Regrind
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.