Home > Plastics > Materials > PULSE™ > PULSE™ 2000 EZ - Datasheet

PULSE™ 2000 EZ Datasheet

PC/ABS Engineering Resin

Supplied by Trinseo

View Complete Data Sheet Search 115000+ Data Sheets
Create Your Free Account! or Login
Product Description
Overview
PULSE™ 2000EZ is a high-heat PC/ABS resin delivering optimized performance for automotive interior component applications.

Benefits
  • Easy flow, reduced scrap, and faster cycle times, while enabling thin wall part design for mass reduction.
  • High-impact strength even at low temperature
  • High Heat resistance for demanding automotive interior components
  • Consistent natural white color produces high quality part appearance when used with color concentrates (self coloring) or Trinseo Color Masterbatch Technology
  • Low odor & VOC to meet all global Automotive OEM specifications

Applications:
  • Mid (floor)consoles
  • Instrument Panel components
  • Door panel trim
  • Pillars
  • Storage / load floors / glove box
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Latin America
  • North America
Features 
  • Good Thermal Stability
Uses 
  • Automotive Applications
  • Automotive Instrument Panel
  • Automotive Interior Trim
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
     
--
g/cm³
ISO 1183/B
--
lb/in³
ISO 1183 2
Apparent Density
g/cm³
ISO 60
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)
g/10 min
ISO 1133
Melt volume-flow rate (230°C/3.8 kg)
in³/10min
ISO 1133 2
Spiral Flow 3
in
 
Molding Shrinkage
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
Injection Molded 4
psi
ISO 527-2
--
psi
ISO 527-2 2
Tensile Stress
     
Yield
psi
ISO 527-2/50
Yield
psi
ISO 527-2 2
Tensile Strain
     
Yield
%
ISO 527-2 2
Break
%
ISO 527-2/50
Nominal strain at break
%
ISO 527-2 2
Flexural Modulus 5
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     
-22°F 6
ft·lb/in²
ISO 179
73°F 6
ft·lb/in²
ISO 179
-22°F
ft·lb/in²
ISO 179/1eA 2
73°F
ft·lb/in²
ISO 179/1eA 2
Charpy impact strength
    ISO 179/1eU 2
-22°F
 
 
73°F
 
 
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi
°F
ISO 75-2 2
264 psi, Unannealed
°F
ISO 75-2/A
264 psi
°F
ISO 75-2 2
Vicat Softening Temperature
     
--
°F
ISO 306/B50
50°C/h, B (50N)
°F
ISO 306 2
CLTE - Flow
     
-22 to 176°F
in/in/°F
ISO 11359-2
--
in/in/°F
ISO 11359-2 2
Related Terminology
This supplier and product may also be known by these terms: Styron LLC
Features
Features may also be described by the following terms: Good Thermal Stability.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Automotive Instrument Panel, Automotive Dash Board.
Automotive Specifications
This plastic material has approval for 19 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (6), FORD (1), 3M (1), TOYOTA (1), BMW (1), RNPO (1), GM (2), TESLA (1), DAIMLER (2), VOLKSWAGEN (3).
Available Documents
Processing
Technical Datasheet
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3Mold Temperature: 140°F, Melt Temperature: 500°F, Injection Pressure: 2.61E+4 psi
40.039 in/min
50.079 in/min
6Type 1, Edgewise, Notch A
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.