Home > Plastics > Materials > Delrin® > Delrin® 100AF - Datasheet

Delrin® 100AF Datasheet

ACETAL RESIN

20% PTFE Fiber

Supplied by DuPont Performance Polymers

View Complete Data Sheet Search 115000+ Data Sheets
Create Your Free Account! or Login
Product Description
20% Teflon® Fiber Filled High Viscosity Acetal Homopolymer with Low Wear and Low Friction
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • PTFE Fiber, 20% Filler by Weight
Additive 
  • Lubricant
  • Mold Release
 
Features 
  • Lubricated
Uses 
  • Profiles
  • Sheet
 
Agency Ratings 
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
 
Multi-Point Data 
  • Shear Stress vs. Shear Rate (ISO 11403-1)
  • Specific Volume vs Temperature (ISO 11403-2)
  • Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)
  • >POM-SF20<
Resin ID (ISO 1043)
  • POM-SF20
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage
    ISO 294-4
Across Flow
%
 
Flow
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Melting Temperature 2
°F
ISO 11357-3
CLTE
    ISO 11359-2
Flow
in/in/°F
 
Transverse
in/in/°F
 
Flammability
Nominal Value
Unit
Test Method
Flammability Classification (0.0591 in)
 
IEC 60695-11-10, -20
Related Terminology
This supplier and product may also be known by these terms: Derlin
Automotive Specifications
This plastic material has approval for 7 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): ASTM (3), DSM (1), CHRYSLER (2), GM (1).
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): UL (1).
Available Documents
Processing - Injection Molding (English)
Typical Processing for DuPont Engineering Polymers (English)
White Paper - Property Advantages of Delrin® Acetal Homopolymer - a guide for design engineers (English)
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.