Home > Plastics > Materials > WONDERLITE® > WONDERLITE® PC-175 - Datasheet

WONDERLITE® PC-175 Datasheet

Polycarbonate

Supplied by CHI MEI CORPORATION

View Complete Data Sheet Search 94000+ Data Sheets
Create Your Free Account! or Login
Product Description
WONDERLITE® PC-175 is a Polycarbonate (PC) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Electrical/Electronic Applications. Primary characteristic: rohs compliant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Uses 
  • Optical Data Storage
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
ASTM D1238
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)
in³/10min
ISO 1133
Molding Shrinkage
    ASTM D955
Flow
in/in
 
Across Flow
in/in
 
Water Absorption (73°F, 24 hr)
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     
Yield, 0.125 in 2
psi
ASTM D638
Yield
psi
ISO 527-2/50
Break
psi
ISO 527-2/50
Tensile Elongation
     
Yield, 0.125 in 2
%
ASTM D638
Break, 0.125 in 2
%
ASTM D638
Break
%
ISO 527-2/50
Flexural Modulus
     
0.250 in 3
psi
ASTM D790
-- 4
psi
ISO 178
Flexural Strength
     
0.250 in 3
psi
ASTM D790
-- 4
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179
Notched Izod Impact Strength
ft·lb/in²
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
ASTM D785
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
    ISO 75-2/A
264 psi, Unannealed
°F
 
264 psi, Annealed
°F
 
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
CLTE - Flow (111 to 212°F)
in/in/°F
ASTM D696
Thermal Conductivity
Btu·in/hr/ft²/°F
ASTM C177
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
ASTM D257
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
ASTM D542
Transmittance (3000 mil)
%
ASTM D1003
Haze (3200 mil)
%
ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: ChiMei
Available Documents
Processing (English)
Technical Datasheet - ASTM (English)
Technical Datasheet - ISO (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
20.24 in/min
30.11 in/min
40.079 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.