Home > Plastics > Materials > OKITEN® > OKITEN® 245 A - Datasheet

OKITEN® 245 A Datasheet

Low Density Polyethylene

Supplied by DIOKI d.d.

View Complete Data Sheet Search 98000+ Data Sheets
Create Your Free Account! or Login
Product Description
OKITEN® 245 A is low density polyethylene, without slip agent, intended for extrusion of general purpose blown film of high transparency and gloss.

OKITEN® 245 A is characterized by excellent processing properties and thermal stability. Extruded film has good mechanical properties.

OKITEN® 245 A is extruded in temperature range from145°C to 170°C.
Recommended film thickness: 0.025 mm to 0.060 mm.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Heat Stabilizer
Features 
  • Food Contact Acceptable
  • Good Processability
  • Good Thermal Stability
  • Heat Stabilized
  • High Clarity
  • High Gloss
Uses 
  • Blending
  • Film
  • Foam
  • Thick-walled Parts
 
Agency Ratings 
 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Film Extrusion
  • Foam Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
    ISO 527-2
Yield
psi
 
Break
psi
 
Tensile Strain (Break)
%
ISO 527-2
Coefficient of Friction
    ISO 8295
vs. Itself - Dynamic
 
 
vs. Itself - Static
 
 
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Film Thickness - Recommended / Available
 
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/A
Melting Temperature
°F
ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Haze (0,984 mil)
%
ISO 14782
Features
Features may also be described by the following terms: High Gloss, Good Processability, Easy Processing, High Clarity, Good Thermal Stability, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3), EC (1).
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.