Home > Plastics > Materials > TITANLENE® > TITANLENE® LDF 260GG - Datasheet

TITANLENE® LDF 260GG Datasheet

Low Density Polyethylene

Supplied by Lotte Chemical Titan (M) Sdn. Bhd.

View Complete Data Sheet Search 98000+ Data Sheets
Create Your Free Account! or Login
Product Description
LDF260GG is a low density polyethylene resin for film extrusion. LDF260GG has medium slip and anti-block additives. LDF260GG meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 2.1 & (c) 2.2.

APPLICATIONS:
Laundry film, Textile packaging, Produce film, Diaper backing.

Characteristics:
Good drawdown and excellent processability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antiblock
  • Slip
 
Features 
  • Antiblocking
  • Good Drawdown
  • Good Processability
  • Low Density
  • Medium Slip
Uses 
  • Film
  • Packaging
 
Agency Ratings 
 
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Secant Modulus
    ASTM D882
1% Secant, MD : 1,2 mil, Blown Film
psi
 
1% Secant, TD : 1,2 mil, Blown Film
psi
 
Tensile Strength
    ASTM D882
MD : Break, 1,2 mil, Blown Film
psi
 
TD : Break, 1,2 mil, Blown Film
psi
 
Tensile Elongation
    ASTM D882
MD : Break, 1,2 mil, Blown Film
%
 
TD : Break, 1,2 mil, Blown Film
%
 
Dart Drop Impact (1,2 mil, Blown Film)
g
ASTM D1709
Elmendorf Tear Strength
    ASTM D1922
MD : 1,2 mil, Blown Film
g
 
TD : 1,2 mil, Blown Film
g
 
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525
Optical
Nominal Value
Unit
Test Method
Haze (1,18 mil, Blown Film)
%
ASTM D1003
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Medium Slip, Low Density, Low Specific Gravity, Good Drawdown, Good draw down, Antiblocking, Unspecified Antiblock.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.