Home > Plastics > Materials > TECHNYL® A > TECHNYL® A 216T V33 BLACK 1N - Datasheet

TECHNYL® A 216T V33 BLACK 1N Datasheet

Polyamide 66

33% Glass Fiber

Supplied by Solvay Engineering Plastics

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
Polyamide PA66 reinforced with 33% of glass fibre, heat stabilised, for injection moulding.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Filler / Reinforcement 
  • Glass Fiber, 33% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Heat Stabilized
Uses 
  • Automotive Applications
Automotive Specifications 
Appearance 
  • Black
Processing Method 
  • Injection Molding
Part Marking Code (ISO 11469)
  • >PA66-GF33<
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183/A
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A
Tensile Stress (Break)
psi
ISO 527-2/1A
Tensile Strain (Break)
%
ISO 527-2/1A
Flexural Modulus
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
ISO 179/1eU
Notched Izod Impact Strength
ft·lb/in²
ISO 180/1A
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
--
°F
ISO 75-2/Af
Melting Temperature
--
°F
ISO 11357-3
CLTE - Flow (73 to 185°F)
--
in/in/°F
ISO 11359-2
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Dry
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
Dry
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Available Documents
Dry
Processing - Rhodia Injection Molding (English)
Processing - Technyl A & C Injection Molding (English)
Technical Datasheet (English)
Injection
Dry
Unit
 
Drying Temperature
°F
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.