Home > Plastics > Materials > ExxonMobil™ HDPE > ExxonMobil™ HDPE HTA 108 - Datasheet

ExxonMobil™ HDPE HTA 108 Datasheet

High Density Polyethylene Resin

Supplied by ExxonMobil Chemical

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
HTA 108 is a homopolymer HDPE film grade designed to improve stiffness and barrier in coextrusion or in PE blends. When blended with LLDPE or metallocene LLDPE, HTA 108 improves their processability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Heat Stabilizer
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR)
    ASTM D1238
--
g/10 min
 
190°C/2.16 kg
g/10 min
 
Films
Nominal Value
Unit
Test Method
Secant Modulus
    ASTM D882
MD
psi
 
TD
psi
 
Tensile Strength
    ASTM D882
MD : Break
psi
 
TD : Break 2
psi
 
Tensile Elongation 2
    ASTM D882
MD : Break
%
 
TD : Break
%
 
Dart Drop Impact
g
ASTM D1709A
Elmendorf Tear Strength
    ASTM D1922
MD
g
 
TD
g
 
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525
Additional Information
Monolayer Film:
HTA108 can be added to LDPE, LLDPE or mLLDPE films to increase stiffness when high transparency is not mandatory.
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES
Available Documents
Technical Datasheet
Notes
1Typical properties: these are not to be construed as specifications.
220 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.