Home > Plastics > Materials > TIPPLEN® > TIPPLEN® K 948 - Datasheet

TIPPLEN® K 948 Datasheet

Polypropylene Impact Copolymer

Supplied by TVK Plc. (Tiszai Vegyi Kombinát)

View Complete Data Sheet Search 101000+ Data Sheets
Create Your Free Account! or Login
Product Description
TIPPLEN K 948 is an impact copolymer polypropylene for the injection moulding. The grade contains nucleated agent. This grade offers very high flow and outstanding processability for shorter cycle times.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Nucleating Agent
Features 
  • Fast Molding Cycle
  • Food Contact Acceptable
  • Good Processability
  • High Flow
  • Impact Copolymer
  • Nucleated
  • Recyclable Material
Uses 
  • Closures
  • Household Goods
  • Kitchenware
  • Pails
  • Thin-walled Containers
  • Thin-walled Packaging
  • Toys
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
ISO 527-2
Tensile Stress (Yield, Injection Molded)
psi
ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
ISO 527-2
Flexural Modulus (Injection Molded)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
    ISO 180/A
-4°F, Injection Molded
ft·lb/in²
 
73°F, Injection Molded
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Related Terminology
This supplier and product may also be known by these terms: Tiplen
Features
Features may also be described by the following terms: Impact Copolymer, Good Processability, Easy Processing, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Thin-walled Packaging, Thin-wall Packaging, Thinwall Packaging, Thin-Walled Containers, Thin-Walled Container, Thin-Wall Containers, Thin-Wall Container, Thinwall Containers, Thinwall Container.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.