Home > Plastics > Materials > INEOS PP > INEOS PP N05G-00 - Datasheet

INEOS PP N05G-00 Datasheet

Polypropylene Impact Copolymer

Supplied by INEOS Olefins & Polymers USA

View Complete Data Sheet Search 99000+ Data Sheets
Create Your Free Account! or Login
Product Description
N05G-00 is a general purpose, polypropylene impact copolymer designed for injection molding and compounding applications. The grade benefits from a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate. This material has been recognized by UL for sustained use at 65°C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • General Purpose
  • Impact Copolymer
Uses 
  • Compounding
  • General Purpose
 
Agency Ratings 
 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
    ASTM D638
Yield
psi
 
Break
psi
 
Tensile Elongation 2
    ASTM D638
Yield
%
 
Break
%
 
Flexural Modulus - 1% Secant
psi
ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-4°F)
ft·lb/in
ASTM D256
Notched Izod Impact (Area)
    ASTM D256
-4°F
ft·lb/in²
 
73°F
 
 
Instrumented Impact, Ductility
    ASTM D3763
-4°F
 
 
73°F
 
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Vicat Softening Temperature
°F
ASTM D1525
RTI Elec (0.0591 in)
°F
UL 746
RTI Imp (0.0591 in)
°F
UL 746
RTI Str (0.0591 in)
°F
UL 746
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.0591 in)
 
UL 94
Optical
Nominal Value
Unit
Test Method
Gloss (60°)
 
ASTM D2457
Features
Features may also be described by the following terms: Impact Copolymer.
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EC (1).
Available Documents
Processing - Injection Molding Tips (English)
Processing - Polypropylene (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.