Solef® 9009 PVDF homopolymer is a semi-crysalline fluoropolymer. Solef® film is chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents and alcohols. Solef® PVDF flim has a very high purity, abrasion resistance comparable to that of polyamides and relatively low coefficient of friction. These films can be used in a wide range of temperatures and have excellent intrinsic fire resistance. Solef® PVDF films have demonstrated excellent weathering properties and are extremely resistant to UV radiation and common industrial and environmental pollutants. Solef® PVDF films can be used in a wide range of applications, including release films, filters, chemical resistance lining, outdoor UV resistant needs as well as electric and electronic applications.

Algoflon® L203 R is a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micron sized primary particles. Algoflon® L203 R can be de-agglomerated to sub-micron particle size by the application of shear providing a better dispersion and distribution of the PTFE particles in the application. Algoflon® L203 R is designed for use as additive in critical engineering and high-end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants. Main features of Algoflon® L203 R include: - High specific surface area - Low molecular weight - Good blendability - Deaglomerated under shear - Improved lubricity - Reduced friction and wear

Algoflon® L206 R is a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micron sized primary particles. Algoflon® L206 R can be de-agglomerated to sub-micron particle size by the application of shear providing a better dispersion and distribution of the PTFE particles in the application. Algoflon® L206 R is designed for use as additive in critical engineering and high-end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants. Main features of Algoflon® L206 R include: - High specific surface area - Low molecular weight - Good blendability - Deaglomerated under shear - Improved lubricity - Reduced friction and wear

Aquivion® D72-25BS is a perfluorosulfonic acid ionomer dispersion that exhibits an Equivalent Weight (EW) of 720 g/eq. Polymer concentration is 25 %w/w. Solvent system is >99 %w/w water and is free of ethers. Aquivion® dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Syensqo. The ionomer dispersions contain its acid form (-SO3H) and are available in various EWs. Aquivion dispersions can be used by the customer to manufacture dispersions based on a variety of solvent blends. These dispersions are suitable for electrode binder applications of electrochemical devices including fuel cells, electrolyzers and potentially Power to X electrochemical devices. Aquivion dispersions can also be used for the productions of membranes, supported or not by ePTFE or woven reinforcements. Please visit Syensqo.com for more information.

Aquivion® D79-25BS is a perfluorosulfonic acid ionomer dispersion that exhibits an Equivalent Weight (EW) of 790 g/eq. Polymer concentration is 25% w/w. Solvent system is >99% w/w water and is free of ethers. Aquivion® dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Syensqo. The perfluorosulfonic acid ionomer dispersions contain its acid form (-SO3H) and are available in various EWs. Aquivion dispersions can be used by the customer to manufacture dispersions based on a variety of solvent blends. These dispersions are suitable for electrode binder applications of electrochemical devices including fuel cells, electrolyzers and potentially Power to X electrochemical devices. Aquivon dispersions can also be used for the production of membranes, supported or not by ePTFE or woven reinforcements.

Aquivion® D87-28BS is a perfluorosulfonic acid ionomer dispersion that exhibits an Equivalent Weight (EW) of 870 g/eq. Polymer concentration is 28 %w/w. Solvent system is >99 %w/w water and is free of ethers. Aquivion® dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Syensqo. The ionomer dispersions contain its acid form (-SO3H) are available in various EWs. Aquivion dispersions can be used by the customer to manufacture dispersions based on a variety of solvent blends. These dispersions are suitable for electrode binder applications of electrochemical devices including fuel cells, electrolyzers and potentially Power to X electrochemical devices. Aquivion dispersions can also be used for the production of membranes, supported or not by ePTFE or woven reinforcements. Please visit Syensqo.com for more information.

Aquivion® D98-25BS is a perfluorosulfonic acid ionomer dispersion that exhibits an Equivalent Weight (EW) of 980 g/eq. Polymer concentration is 25 %w/w. Solvent system is >99 %w/w water and is free of ethers. Aquivion® dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Syensqo. The ionomer dispersions contain its acid form (-SO3H) are available in various EWs. Aquivion dispersions can be used by the customer to manufacture dispersions based on a variety of solvent blends. These dispersions are suitable for electrode binder applications of electrochemical devices including fuel cells, electrolyzers and potentially Power to X electrochemical devices. Aquivion dispersions can also be used for the production of membranes, supported or not by ePTFE or woven reinforcements. Please visit Syensqo.com for more information.

Fluorolink® A10-P is a dialkyl amide PFPE derivative. It is especially designed for use as a polymer additive and can be compounded with thermoplastic and elastomeric materials to provide: • Low coefficient of friction (no stick-slip effect, noise reduction, anti-squeak properties) • Improved wear and abrasion resistance (leading to an extended working life) • Better chemical resistance • Water/oil and stain repellency • Improved surface smoothness and gloss All these benefits can be obtained without changing the bulk properties of the host material such as mechanical properties, color, etc. The addition of about 0.5 – 5 % w/w of Fluorolink® A10-P has demonstrated to enhance all surface properties of host materials such as: • Engineering thermoplastics (PolyAmides, PolyOxymethylene, PolyEsthers, Polyolefins and others) • Elastomers (EPDM, NBR, HNBR, Polyurethane based elastomers and others) • Thermoplastic elastomers (Styrenics, Polyurethane based TPE, Copolyesters, Polyolefin Blends (TPO), Dinamically Vulcanized Polyolefin alloys (TPV, TPSiV), polyamide block copolymer) Fluorolink® A10-P is usually used: • In thermoplastic parts subjected to wear such as gears, sliding-chain conveyors • In sealing systems like door seals to reduce stick-slip and noise emission • In portable and wearable devices (such as watch bands, protective smartphone cases, cable jackets, camera grips, soft-touch overmolding and others) to improve cleanability and removal of stains as well as develop soft touch feeling • In rubber rolls to reduce friction • In fibers to reduce the CoF and improve the water repellency and soil release, etc.

Fluorolink® E10-H is a dialcohol terminated, ethoxylated PFPE. Thanks to its functional hydroxyl end-groups, can be used to modify polymers such as urethanes, esters, epoxies and acrylates. Fluorolink® E10-H is especially suitable as a building block and polymer modifier for those applications that require a combination of excellent water and oil repellency, easy removal of graffiti and fingerprints, low friction, low refractive index and high chemical resistance.

Fomblin® D2 is a dialcohol terminated PFPE. Thanks to its functional hydroxyl end-groups, can be used to modify polymeric materials such as urethanes, esters, epoxies and acrylates. Fomblin® D2 is especially suitable as a building block and polymer modifier for those applications that require a combination of excellent water and oil repellency, easy removal of graffiti and fingerprints, low friction, low refractive index and high chemical resistance.

Based on proprietary technology, Syensqo has developed a line of patented PFPE additives to improve the performance of Fomblin® oils and greases. Fomblin® DA series are derived directly from Fomblin® PFPE's production process and contain functional groups. Fomblin® DA410 is functionalized fluorinated product used as additive in perfluorinated grease to improve the performance at high temperature in presence of metals. The physical properties of greases additivated with DA410 remain practically unchanged compared to those of the non-additivated greases; volatility may increase slightly, depending on the base fluid, and oil separation may decrease. Depending on the base fluid, these greases can be used at temperatures to 250°C.

Fomblin® DA305 is the optimum product for use with greases. Solutions of Fomblin® PFPE lubricants formulated with 5% (wt.) of DA305 are clear and stable in storage for over 1 year. These blends can be used in exactly the same manner as non-additivated Fomblin® lubricants for the production of greases. The physical properties of greases additivated with DA305 remain practically unchanged compared to those of the non-additivated greases; volatility may increase slightly, depending on the base fluid, and oil separation may decrease. Depending on the base fluid, these greases can be used at temperatures ranging from -70 to 250 °C.

Fomblin® DA306/VAC is primarily recommended for formulations with Fomblin® Y-LVAC fluids. Solutions of Fomblin® lubricants additivated with 5% (wt.) of DA306/VAC are clear and stable in storage for over 1 year. It imparts antirust properties without significantly affecting the volatility and the viscosity of the original fluid, the typical physical properties remaining unchanged. The additive does not significantly affect either the ultimate pressure or the back-migration rate. Fluids additivated with DA306/VAC can be used at temperatures ranging from -70 to 250 °C.

Fomblin® LC perfluoropolyether fluids have the following unique features: - Excellent wear characteristics - Very good temperature properties - Cost effective - Outstanding for application requiring low viscosity

Fomblin® M perfluoropolyether fluids have the following unique features: - Excellent viscosity index - Excellent low temperature torque values - Very good extreme pressure (EP) characteristics - Very low evaporative loss properties - Good thermal stability

Fomblin® M perfluoropolyether fluids have the following unique features: - Excellent viscosity index - Excellent low temperature torque values - Very good extreme pressure (EP) characteristics - Very low evaporative loss properties - Good thermal stability

Fomblin® M perfluoropolyether fluids have the following unique features: - Excellent viscosity index - Excellent low temperature torque values - Very good extreme pressure (EP) characteristics - Very low evaporative loss properties - Good thermal stability

Fomblin® M perfluoropolyether fluids have the following unique features: - Excellent viscosity index - Excellent low temperature torque values - Very good extreme pressure (EP) characteristics - Very low evaporative loss properties - Good thermal stability Fomblin® M15RP is a clear solution containing a PFPE-soluble anti-rust additive, developed by Syensqo. The soluble additive is derived directly from Fomblin® PFPE's production process and contain functional groups, which can interact with the substrate and thereby improve surface protection.

Fomblin® M perfluoropolyether fluids have the following unique features: - Excellent viscosity index - Excellent low temperature torque values - Very good extreme pressure (EP) characteristics - Very low evaporative loss properties - Good thermal stability

Fomblin® M perfluoropolyether fluids have the following unique features: - Excellent viscosity index - Excellent low temperature torque values - Very good extreme pressure (EP) characteristics - Very low evaporative loss properties - Good thermal stability Fomblin® M30RP is a clear solution containing a PFPE-soluble anti-rust additive, developed by Syensqo. The soluble additive is derived directly from Fomblin® PFPE's production process and contain functional groups, which can interact with the substrate and thereby improve surface protection.

Fomblin® M perfluoropolyether fluids have the following unique features: - Excellent viscosity index - Excellent low temperature torque values - Very good extreme pressure (EP) characteristics - Very low evaporative loss properties - Good thermal stability

Fomblin® M perfluoropolyether fluids have the following unique features: - Excellent viscosity index - Excellent low temperature torque values - Very good extreme pressure (EP) characteristics - Very low evaporative loss properties - Good thermal stability

Fomblin® S VAC 250 is a new developed grade of PFPE lubricant for vacuum pump. Thanks to its high viscosity index, the film thickness at high temperature improve the lubrication performances of components in vacuum pump systems. An optimum concentration of antirust additive was studied to provide protection against rust and at the same time to guarantee the physical properties and the vacuum performance of the grade.

Fomblin® T4 is a tetrafunctional, hydroxyl-terminated PFPE. Thanks to its functional hydroxyl end-groups, it can be used to modify polymers such as urethane esters, epoxies, and acrylates. Fomblin® T4 is especially suitable as a building block and polymer modifier for those applications that require a combination of low refractive index, high chemical resistance, and low surface energy.

Fomblin® W perfluoropolyether fluids have the following unique features: - Good low to high temperature performance - Very good viscosity index - Low to high temperature stability - Low evaporative loss

Fomblin® W perfluoropolyether fluids have the following unique features: - Good low to high temperature performance - Very good viscosity index - Low to high temperature stability - Low evaporative loss

Fomblin® W perfluoropolyether fluids have the following unique features: - Good low to high temperature performance - Very good viscosity index - Low to high temperature stability - Low evaporative loss

Fomblin® Y PFPE perfluoropolyether fluids have the following unique features: - Low vapor pressure - Chemical inertness - High thermal stability - Good lubricant properties - No flash or fire point - Non-toxicity - Excellent compatibility with metals, plastics, elastomers - Good aqueous and non-aqueous solvent resistance - High dielectric properties - Low surface tension - Good radiation stability - Environmentally acceptable

Fomblin® Y PFPE perfluoropolyether fluids have the following unique features: - Low vapor pressure - Chemical inertness - High thermal stability - Good lubricant properties - No flash or fire point - Non-toxicity - Excellent compatibility with metals, plastics, elastomers - Good aqueous and non-aqueous solvent resistance - High dielectric properties - Low surface tension - Good radiation stability - Environmentally acceptable

Fomblin® Y PFPE perfluoropolyether fluids have the following unique features: - Low vapor pressure - Chemical inertness - High thermal stability - Good lubricant properties - No flash or fire point - Non-toxicity - Excellent compatibility with metals, plastics, elastomers - Good aqueous and non-aqueous solvent resistance - High dielectric properties - Low surface tension - Good radiation stability - Environmentally acceptable Rust Preventive formulation (LVAC RP) was studied to reduce or prevent rusting when huge amount of water vapors has to be pumped or when metal surfaces of the pump are exposed to moisture. An optimum concentration of additive in Fomblin® Y LVAC grades was studied to provide protection against rust and at the same time to guarantee the physical properties and the vacuum performance of the grade.

Fomblin® Y PFPE perfluoropolyether fluids have the following unique features: - Low vapor pressure - Chemical inertness - High thermal stability - Good lubricant properties - No flash or fire point - Non-toxicity - Excellent compatibility with metals, plastics, elastomers - Good aqueous and non-aqueous solvent resistance - High dielectric properties - Low surface tension - Good radiation stability - Environmentally acceptable

Fomblin® Y PFPE perfluoropolyether fluids have the following unique features: - Low vapor pressure - Chemical inertness - High thermal stability - Good lubricant properties - No flash or fire point - Non-toxicity - Excellent compatibility with metals, plastics, elastomers - Good aqueous and non-aqueous solvent resistance - High dielectric properties - Low surface tension - Good radiation stability - Environmentally acceptable

Fomblin® Y PFPE perfluoropolyether fluids have the following unique features: - Low vapor pressure - Chemical inertness - High thermal stability - Good lubricant properties - No flash or fire point - Non-toxicity - Excellent compatibility with metals, plastics, elastomers - Good aqueous and non-aqueous solvent resistance - High dielectric properties - Low surface tension - Good radiation stability - Environmentally acceptable

Fomblin® Y PFPE perfluoropolyether fluids have the following unique features: - Low vapor pressure - Chemical inertness - High thermal stability - Good lubricant properties - No flash or fire point - Non-toxicity - Excellent compatibility with metals, plastics, elastomers - Good aqueous and non-aqueous solvent resistance - High dielectric properties - Low surface tension - Good radiation stability - Environmentally acceptable Rust Preventive formulation (LVAC E) was studied to reduce or prevent rusting when huge amount of water vapors has to be pumped or when metal surfaces of the pump are exposed to moisture. An optimum concentration of additive in Fomblin® Y LVAC grades was studied to provide protection against rust and at the same time to guarantee the physical properties and the vacuum performance of the grade.

Fomblin® Y perfluoropolyether fluids have the following unique features: - Excellent high temperature stability - Good low temperature properties - Very good extreme pressure (EP) and wear characteristics - Low evaporative loss - Good thermal index

Fomblin® Y perfluoropolyether fluids have the following unique features: - Excellent high temperature stability - Good low temperature properties - Very good extreme pressure (EP) and wear characteristics - Low evaporative loss - Good thermal index

Fomblin® Y perfluoropolyether fluids have the following unique features: - Excellent high temperature stability - Good low temperature properties - Very good extreme pressure (EP) and wear characteristics - Low evaporative loss - Good thermal index

Fomblin® Y perfluoropolyether fluids have the following unique features: - Excellent high temperature stability - Good low temperature properties - Very good extreme pressure (EP) and wear characteristics - Low evaporative loss - Good thermal index

Fomblin® Y perfluoropolyether fluids have the following unique features: - Excellent high temperature stability - Good low temperature properties - Very good extreme pressure (EP) and wear characteristics - Low evaporative loss - Good thermal index

Fomblin® Y-LOX 120 perfluoropolyether fluids have the following unique features: - Outstanding chemical stability - Thermal stability - Lubrication properties