Polyethylen (PE) by Chevron Phillips Chemical Company LLC
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
Blackstripe® 8400 Series Yellow HDPE Pipe | Lateinamerika |
Blackstripe ® 8400 Series Yellow HDPE Pipe meets or exceeds:
- ASTM D2513
- CAN/CSA-B137.4
- UPC
- ASTM D3350, cell classification PE445574E
- PPI TR-4 designation PE4710
Blackstripe ® 8400 Series Yellow HDPE Pipe for:
- Natural Gas Distribution, LPG andPropane Gas Distribution, Yard Gas
- Iron Pipe Size ½" up to 12"
- Copper Tube Size OD (CTS) ½" – 1¼"
- Coils Available up through 6"
|
DRISCOPLEX® 1000 | Lateinamerika |
DriscoPlex ® 1000 Pipe meets or exceeds:
- ASTM F714 (4” and larger)
- ASTM D3035 (up to 3”)
- ASTM D3350, cell classification PE445574C
- PPI TR-4 designation PE4710
DriscoPlex ® 1000 Pipe for:
- Non-Potable, Non AWWA Water
- Irrigation, Industrial, Agriculture
- Iron Pipe Size (IPS) ¾” to 54” Solid Black 40’ and 50’ Jts
- 500’ coils available in sizes through 6”
|
DRISCOPLEX® 1700 MINING STRIPE | Lateinamerika |
DriscoPlex ® 1700 Pipe meets or exceeds:
- ASTM F714
- ASTM D3350, cell classification PE445574C
- PPI TR-4 designation PE4710
DriscoPlex ® 1700 Pipe for:
- Iron Pipe Size OD (IPS) 4” to 54”, 40’ and 50’ Joints / Solid Black
Single Color Stripe for DR Identification
- DR6 – Pink, DR7 – White, DR9 – Red, DR11 – Yellow,
- DR13.5 – Gray, DR15.5 – Orange, DR17 – Blue,
- DR21 – Purple, DR26 – Green, DR32.5 – Brown
|
DRISCOPLEX® 4000 (DIPS) /4100 (IPS) | Lateinamerika |
DriscoPlex ® 4100 FM (IPS)/4000 FM (DIPS) Pipe meets or exceeds:
- ASTM F714 (4” and larger) AWWA C906 NSF/ANSI 61
- ASTM D3035 (up to 3”) AWWA C901 NSF/ANSI 61
- ASTM D3350, cell classification PE445574C
- PPI TR-4 designation PE4710
- NSF/ANSI 14 – Available upon request
DriscoPlex ® 4100/4000 Pipe for:
- Potable Water, Raw Water, Sanitary Sewer,
- Reclaimed Water, Storm Drain, Treated Sewage, etc.
- Iron Pipe Size OD (IPS) ¾” to 54”,
- Ductile Iron Pipe Size OD (DIPS) 4” to 42”
- 40’ and 50’ Joints / Solid Black / Color Striping Available
- 500’ coils available in sizes through 6”
|
DRISCOPLEX® 4100 (IPS) FM/4000 (DIPS) FM | Lateinamerika |
DriscoPlex ® 4100 FM (IPS)/4000 FM (DIPS) Pipe meets or exceeds:
- FM Approvals Class Number 1613
- Class 200 (DR 11), Class 250 (DR 9) and Class 335 (DR 7)
- ASTM F714 AWWA C906 (4” and Larger)
- ASTM D3035 AWWA C901 (up to 3”)
- ASTM D3350, cell classification PE445574C
- PPI TR-4 designation PE4710
DriscoPlex ® 4100/4000 Pipe for:
- Fire Main Piping
- Iron Pipe Size OD (IPS) 2” to 24” – Class 200, 250, 335
- Ductile Iron Pipe Size OD (DIPS) 4” to 24” – Class 200, 250
- Solid Black / Red Color Striping Available
- Blue Striping when dual listed with AWWA
- 40’ and 50’ Joints
- 500’ coils available in sizes through 6”
|
DRISCOPLEX® 4600 (IPS) 4700 (DIPS) | Lateinamerika |
DriscoPlex ® 4600/4700 Pipe meets:
- ASTM F714
- ASTM D3350 cell classification PE445574E
- PE 4710
DriscoPlex ® 4600/4700 Pipe for:
- Sanitary, Treated, Storm Water Sewage
- Pipelines requiring video inspection capability
- 4600 Series Iron Pipe Size OD (IPS) 4” to 54”
- 4700 Series Ductile Iron Pipe Size OD (DIPS) 4” to 42”
- Solid Gray/Green Striping Available
|
DRISCOPLEX® 6300 Line Pipe | Lateinamerika |
DriscoPlex ® 6300 Pipe meets or exceeds:
- ASTM F2619
- API 15LE
- ASTM D3350, cell classification PE445574C
- PPI TR-4 designation PE4710
Iron Pipe Size OD (IPS) ¾” to 54”, 40’ and 50’ Joints / Solid Black Coils available in sizes through 6”
DriscoPlex ® 6300 Pipe for:
- Oil and Gas Gathering
- Sour Gas
- Raw Water and Brine Water
- Produced Water
- Multiphase Oilfield Dolutions
- Non-Potable Oilfield Water Applications
|
DRISCOPLEX® 6400 Oil and Gas Gathering | Lateinamerika |
DriscoPlex ® 6400 Pipe meets or exceeds:
- ASTM D2513
- Title 49, Code of Federal Regulations, Part 192
- API 15LE
- ASTM D3350, cell classification PE445574C
- PPI TR-4 designation PE4710
DriscoPlex ® 6400 Pipe for:
Class 3, Class 4 and Federally Regulated:
• Oil & Gas Gathering
• Coal Bed Methane
• Landfill Methane
|
DRISCOPLEX® 6500 Series | Lateinamerika |
DriscoPlex® 6500 Series Pipe and Fittings meet or exceed:
- ASTM D2513, D2683, D3261
- CAN/CSA-B137.4
- UPC
- ASTM D3350, cell classificationPE234373E and PE234375E
- PPI TR-4 designations PE2708 and PE80
DriscoPlex® 6500 Series Pipe and Fittings for:
- Natural Gas Distribution, LPG and Propane Gas Distribution, Yard Gas
- Iron Pipe Size OD (IPS) ½" to 12"
- Copper Tube Size OD (CTS) ½" to 1¼"
|
Marlex® 1007 | Lateinamerika |
This autoclave LDPE homopolymer is tailored for applications that require:
- Excellent flexibility
- Good flow
- Good warpage resistance
- Durability
Typical injection molded applications for 1007 include:
- Housewares
- Tamper evident, snap-on caps
- Wine bottle sleeve caps
This resin meets these specifications:
- ASTM D4976 - PE 113
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 1009 | Lateinamerika |
This autoclave LDPE homopolymer is tailored for applications that require:
- Excellent flexibility
- Excellent flow
- Good warpage resistance
- Durability
Typical injection molded applications for 1009 include:
- Large housewares
- Tamper evident, snap-on caps
- Feminine hygiene applications
This resin meets these specifications:
- ASTM D4976 - PE 112
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 1017 | Lateinamerika |
This low density polyethylene is tailored for extrusion coating applications that require:
- Excellent processability
- Low neck-in
- High temperature extrusion stability
Typical extrusion coating applications may include:
- Laminations
- Sealant resin
- General paper and board coating
- General flexible packaging
|
Marlex® 1018 | Lateinamerika |
This low density polyethylene is tailored for extrusion coating applications that require:
- Excellent processability
- Low neck-in
- High temperature extrusion stability
Typical extrusion coating applications may include:
- Laminations
- Sealant resin
- General paper and board coating
- General flexible packaging
|
Marlex® 1019 | Lateinamerika |
This low density polyethylene is tailored for extrusion coating applications that require:
- Excellent processability
- Very high line speed at low coating weights
- Processability at lower extrusion temperature
- High temperature extrusion stability
- Excellent drawdown characteristics
- Low neck-in
Typical extrusion coating applications may include:
- Food packaging
- Laminations
- Sealant resin
- General paper and board coating
- General flexible packaging
|
Marlex® 1122 | Lateinamerika |
This low density polyethylene is tailored for film applications that require:
- Easy processing
- No additives
- Good contact clarity
Typical blown film applications include:
- Liners
- Trash bags
- Masking films
|
Marlex® 1122B | Lateinamerika |
This autoclave LDPE homopolymer is tailored for applications that require:
- Excellent flexibility
- Moderate flow
- Moderate warpage resistance
- Durability
Typical injection molded applications for 1122B include:
- Healthcare product closures
- Charcoal lighter fluid closures
- Champagne bottle stoppers
This resin meets these specifications:
- ASTM D4976 - PE 113
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 1412 | Lateinamerika |
This autoclave LDPE homopolymer is tailored for applications that require:
- Good flexibility
- Excellent flow
- Excellent warpage resistance
- Durability
Typical injection molded applications for 1412 include:
- Lids and overcaps with multi-level molds
This resin meets these specifications:
- ASTM D4976 - PE 111
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 4517 | Lateinamerika |
This low density polyethylene is tailored for extrusion coating applications that require:
- Excellent processability
- Good WVTR
- Good heat seal
Typical extrusion coating applications may include:
- Liquid packaging
- Cup stock
- Folding carton
- General paper and board coating
|
Marlex® 4538A | Lateinamerika |
This autoclave, low density, ethylene homopolymer is tailored for blow molded applications that require:
- Good impact resistance
- Excellent flexibility
- Good clarity
- Good gloss
- No slip or antiblock
Typical blow molded applications for 4538A include:
- Pharmaceutical bottles
- Squeeze bottles
- Flexible toys
Typical extrusion applications for 4538A include:
- Wood-plastic composite component
- Blends to improve friction values
- Blends to enhance part flexibility
- Adhesives
This resin meets these specifications:
- ASTM D4976 - PE 113
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per Table 2 of 21 CFR 176.170(c)
- Listed in the Drug Master File
|
Marlex® 4571 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- High speed extrusion
- Low neck-in
- Good drawdown
- Edge tear resistance
- High coefficient of friction
Typical cast film resin applications include:
- Personal care
- General purpose
|
Marlex® 5104 | Lateinamerika |
This autoclave, low density, ethylene homopolymer is tailored for blow molded applications that require:
- Good impact resistance
- Excellent flexibility
- Good clarity
- Good gloss
- No slip or antiblock
Typical blow molded applications for 5104 include:
- Pharmaceutical bottles
- Squeeze bottles
- Flexible toys
Typical extrusion applications for 5104 include:
- Wood-plastic composite component
- Blends to improve friction values
- Blends to enhance part flexibility
- Adhesives
This resin meets these specifications:
- ASTM D4976 - PE 113
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per Table 2 of 21 CFR 176.170(c)
- Listed in the Drug Master File
|
Marlex® 5335 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Easy processing
- Low coefficient of friction
- Good openability
- Good sealability
Typical blown film applications include:
- Institutional packaging
- Food packaging
- Converter films
|
Marlex® 5428 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- Excellent openability
- Suited for high speed converting
- Good clarity
- Low COF
Typical cast film applications include:
- Bakery film
- General purpose packaging
|
Marlex® 5429 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- Excellent openability
- Suited for high speed converting
- Good clarity
- Medium coefficient of friction
Typical cast film applications include:
- Convertor film
- General purpose packaging
|
Marlex® 5430 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- Excellent optics
- Easy processing
- High COF
Typical cast film applications include:
- Overwrap
- Coextruded film
- General purpose packaging
|
Marlex® 5440 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- Suited for high speed converting
- Good clarity
- Low COF
Typical cast film applications include:
- Coextruded film
- General purpose packaging
|
Marlex® 5561 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Excellent optics
- Good impact strength
- Exceptional processability
- Good heat seal characteristics
- High coefficient of friction
Typical blown film applications include:
- Laminations
- Bakery film
- Case shrink wrap
- Produce and hardware packaging
|
Marlex® 5563 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Excellent optics
- Good impact strength
- Exceptional processability
- Good heat seal characteristics
- Low coefficient of friction
Typical blown film applications include:
- Laminations
- Bakery film
- Case shrink wrap
- Produce and hardware packaging
|
Marlex® 5613 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Superior strength
- Good abrasion and tear resistance
- Exceptional shrink and shrink tension
- High coefficient of friction
Typical blown film applications include:
- Heavy duty packaging
- Pallet shrink
- Case shrink wrap
- C&A film and container liners
|
Marlex® 5619 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Superior strength
- Good abrasion and tear resistance
- Exceptional shrink and shrink tension
- Low coefficient of friction
Typical blown film applications include:
- Heavy duty packaging
- Pallet shrink
- Case shrink wrap
- C&A film and container liners
|
Marlex® 5626 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Excellent retention of properties after aging
- Excellent shrink properties
- High coefficient of friction
Typical blown film applications include:
- Heavy duty packaging
- Case shrink wrap
|
Marlex® 5754 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Superb optics
- Excellent impact strength
- Exceptional processability
- Low coefficient of friction
Typical blown film resin applications include:
- Produce bags
- Frozen food packaging
- Case shrink wrap, bundling
- Dry goods packaging
- Laminations
- General purpose clarity packaging
|
Marlex® 5755 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Superb optics
- Excellent impact strength
- Exceptional processability
- High coefficient of friction
Typical blown film resin applications include:
- Produce bags
- Frozen food packaging
- Dry goods packaging
- Case shrink wrap, bundling
- Laminations
- General purpose clarity packaging
|
Marlex® 7104 | Lateinamerika |
This linear low density, high molecular weight hexene copolymer is tailored for sheet and geomembrane applications that require:
- Outstanding ESCR
- Good melt strength
- Excellent flexibility
- Good processability
- Good gloss
- High coefficient-of-friction values
Typical geomembrane applications for 7104 include:
- Landfill covers
- Flat and round-die products
Typical sheet applications for 7104 include:
- Coextruded cap layers on HDPE
- Blends with HDPE
This resin meets these specifications:
- ASTM D4976 - PE 215
- FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 7105D | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Excellent toughness properties
- Good drawdown
- Good processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- High strength industrial film and bags
- Thin gauge applications
- General purpose packaging
|
Marlex® 7109 | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags
- Thin gauge applications
- General purpose packaging
|
Marlex® 7109DJ | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags
- Thin gauge applications
- General purpose packaging
|
Marlex® 7109DL | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags
- Thin gauge applications
- General purpose packaging
|
Marlex® 7109FJ | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good stiffness at thin gauges
- Good drawdown
- Excellent processability
- Use alone or in blends with LDPE or HDPE
- Low amounts of antiblocking agent
Typical blown film applications include:
- Industrial liners
- Garment bags
- Mailer bags
- General purpose packaging
|
Marlex® 7109M | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags
- Thin gauge applications
- General purpose packaging
|