Polyethylen (PE): Marlex®
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
Marlex® 1007 | Lateinamerika |
This autoclave LDPE homopolymer is tailored for applications that require:
- Excellent flexibility
- Good flow
- Good warpage resistance
- Durability
Typical injection molded applications for 1007 include:
- Housewares
- Tamper evident, snap-on caps
- Wine bottle sleeve caps
This resin meets these specifications:
- ASTM D4976 - PE 113
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 1009 | Lateinamerika |
This autoclave LDPE homopolymer is tailored for applications that require:
- Excellent flexibility
- Excellent flow
- Good warpage resistance
- Durability
Typical injection molded applications for 1009 include:
- Large housewares
- Tamper evident, snap-on caps
- Feminine hygiene applications
This resin meets these specifications:
- ASTM D4976 - PE 112
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 1017 | Lateinamerika |
This low density polyethylene is tailored for extrusion coating applications that require:
- Excellent processability
- Low neck-in
- High temperature extrusion stability
Typical extrusion coating applications may include:
- Laminations
- Sealant resin
- General paper and board coating
- General flexible packaging
|
Marlex® 1018 | Lateinamerika |
This low density polyethylene is tailored for extrusion coating applications that require:
- Excellent processability
- Low neck-in
- High temperature extrusion stability
Typical extrusion coating applications may include:
- Laminations
- Sealant resin
- General paper and board coating
- General flexible packaging
|
Marlex® 1019 | Lateinamerika |
This low density polyethylene is tailored for extrusion coating applications that require:
- Excellent processability
- Very high line speed at low coating weights
- Processability at lower extrusion temperature
- High temperature extrusion stability
- Excellent drawdown characteristics
- Low neck-in
Typical extrusion coating applications may include:
- Food packaging
- Laminations
- Sealant resin
- General paper and board coating
- General flexible packaging
|
Marlex® 1122 | Lateinamerika |
This low density polyethylene is tailored for film applications that require:
- Easy processing
- No additives
- Good contact clarity
Typical blown film applications include:
- Liners
- Trash bags
- Masking films
|
Marlex® 1122B | Lateinamerika |
This autoclave LDPE homopolymer is tailored for applications that require:
- Excellent flexibility
- Moderate flow
- Moderate warpage resistance
- Durability
Typical injection molded applications for 1122B include:
- Healthcare product closures
- Charcoal lighter fluid closures
- Champagne bottle stoppers
This resin meets these specifications:
- ASTM D4976 - PE 113
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 1412 | Lateinamerika |
This autoclave LDPE homopolymer is tailored for applications that require:
- Good flexibility
- Excellent flow
- Excellent warpage resistance
- Durability
Typical injection molded applications for 1412 include:
- Lids and overcaps with multi-level molds
This resin meets these specifications:
- ASTM D4976 - PE 111
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 4517 | Lateinamerika |
This low density polyethylene is tailored for extrusion coating applications that require:
- Excellent processability
- Good WVTR
- Good heat seal
Typical extrusion coating applications may include:
- Liquid packaging
- Cup stock
- Folding carton
- General paper and board coating
|
Marlex® 4538A | Lateinamerika |
This autoclave, low density, ethylene homopolymer is tailored for blow molded applications that require:
- Good impact resistance
- Excellent flexibility
- Good clarity
- Good gloss
- No slip or antiblock
Typical blow molded applications for 4538A include:
- Pharmaceutical bottles
- Squeeze bottles
- Flexible toys
Typical extrusion applications for 4538A include:
- Wood-plastic composite component
- Blends to improve friction values
- Blends to enhance part flexibility
- Adhesives
This resin meets these specifications:
- ASTM D4976 - PE 113
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per Table 2 of 21 CFR 176.170(c)
- Listed in the Drug Master File
|
Marlex® 4571 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- High speed extrusion
- Low neck-in
- Good drawdown
- Edge tear resistance
- High coefficient of friction
Typical cast film resin applications include:
- Personal care
- General purpose
|
Marlex® 5104 | Lateinamerika |
This autoclave, low density, ethylene homopolymer is tailored for blow molded applications that require:
- Good impact resistance
- Excellent flexibility
- Good clarity
- Good gloss
- No slip or antiblock
Typical blow molded applications for 5104 include:
- Pharmaceutical bottles
- Squeeze bottles
- Flexible toys
Typical extrusion applications for 5104 include:
- Wood-plastic composite component
- Blends to improve friction values
- Blends to enhance part flexibility
- Adhesives
This resin meets these specifications:
- ASTM D4976 - PE 113
- FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per Table 2 of 21 CFR 176.170(c)
- Listed in the Drug Master File
|
Marlex® 5335 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Easy processing
- Low coefficient of friction
- Good openability
- Good sealability
Typical blown film applications include:
- Institutional packaging
- Food packaging
- Converter films
|
Marlex® 5428 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- Excellent openability
- Suited for high speed converting
- Good clarity
- Low COF
Typical cast film applications include:
- Bakery film
- General purpose packaging
|
Marlex® 5429 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- Excellent openability
- Suited for high speed converting
- Good clarity
- Medium coefficient of friction
Typical cast film applications include:
- Convertor film
- General purpose packaging
|
Marlex® 5430 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- Excellent optics
- Easy processing
- High COF
Typical cast film applications include:
- Overwrap
- Coextruded film
- General purpose packaging
|
Marlex® 5440 | Lateinamerika |
This low density polyethylene is tailored for cast film applications that require:
- Suited for high speed converting
- Good clarity
- Low COF
Typical cast film applications include:
- Coextruded film
- General purpose packaging
|
Marlex® 5561 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Excellent optics
- Good impact strength
- Exceptional processability
- Good heat seal characteristics
- High coefficient of friction
Typical blown film applications include:
- Laminations
- Bakery film
- Case shrink wrap
- Produce and hardware packaging
|
Marlex® 5563 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Excellent optics
- Good impact strength
- Exceptional processability
- Good heat seal characteristics
- Low coefficient of friction
Typical blown film applications include:
- Laminations
- Bakery film
- Case shrink wrap
- Produce and hardware packaging
|
Marlex® 5613 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Superior strength
- Good abrasion and tear resistance
- Exceptional shrink and shrink tension
- High coefficient of friction
Typical blown film applications include:
- Heavy duty packaging
- Pallet shrink
- Case shrink wrap
- C&A film and container liners
|
Marlex® 5619 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Superior strength
- Good abrasion and tear resistance
- Exceptional shrink and shrink tension
- Low coefficient of friction
Typical blown film applications include:
- Heavy duty packaging
- Pallet shrink
- Case shrink wrap
- C&A film and container liners
|
Marlex® 5626 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Excellent retention of properties after aging
- Excellent shrink properties
- High coefficient of friction
Typical blown film applications include:
- Heavy duty packaging
- Case shrink wrap
|
Marlex® 5754 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Superb optics
- Excellent impact strength
- Exceptional processability
- Low coefficient of friction
Typical blown film resin applications include:
- Produce bags
- Frozen food packaging
- Case shrink wrap, bundling
- Dry goods packaging
- Laminations
- General purpose clarity packaging
|
Marlex® 5755 | Lateinamerika |
This low density polyethylene is tailored for blown film applications that require:
- Superb optics
- Excellent impact strength
- Exceptional processability
- High coefficient of friction
Typical blown film resin applications include:
- Produce bags
- Frozen food packaging
- Dry goods packaging
- Case shrink wrap, bundling
- Laminations
- General purpose clarity packaging
|
Marlex® 7104 | Lateinamerika |
This linear low density, high molecular weight hexene copolymer is tailored for sheet and geomembrane applications that require:
- Outstanding ESCR
- Good melt strength
- Excellent flexibility
- Good processability
- Good gloss
- High coefficient-of-friction values
Typical geomembrane applications for 7104 include:
- Landfill covers
- Flat and round-die products
Typical sheet applications for 7104 include:
- Coextruded cap layers on HDPE
- Blends with HDPE
This resin meets these specifications:
- ASTM D4976 - PE 215
- FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 7105D | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Excellent toughness properties
- Good drawdown
- Good processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- High strength industrial film and bags
- Thin gauge applications
- General purpose packaging
|
Marlex® 7109 | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags
- Thin gauge applications
- General purpose packaging
|
Marlex® 7109DJ | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags
- Thin gauge applications
- General purpose packaging
|
Marlex® 7109DL | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags
- Thin gauge applications
- General purpose packaging
|
Marlex® 7109FJ | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good stiffness at thin gauges
- Good drawdown
- Excellent processability
- Use alone or in blends with LDPE or HDPE
- Low amounts of antiblocking agent
Typical blown film applications include:
- Industrial liners
- Garment bags
- Mailer bags
- General purpose packaging
|
Marlex® 7109M | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags
- Thin gauge applications
- General purpose packaging
|
Marlex® 7120B | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for film applications that require:
- Excellent processing characteristics
- Exceptional drawdown
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Coextrusions
- Blend component to improve drawdown
- Thin gauge applications
- General purpose packaging
This linear low density polyethylene is an ethylene-hexene copolymer tailored for film applications that require:
- Good stiffness at thin gauges
- Good drawdown
- Excellent processability
- Can use straight or in blends with LDPE or HDPE
- High amounts of slip agent
Typical cast film applications include:
- Overwrap
- Coextrusions
|
Marlex® 7120X | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for film applications that require:
- Excellent processing characteristics
- Exceptional drawdown
- Use alone or in coextrusions; blends with other polyolefins
- Good stiffness at thin gauges
- Available with slip or high stabilization package
Typical blown film applications include:
- Coextrusions
- Blend component to improve drawdown
- Thin gauge applications
- General purpose packaging
Typical cast film applications include:
- Stretch wrap
- Overwrap
- Coextrusions Nominal
This linear low density polyethylene is an ethylene-hexene copolymer tailored for film applications that require:
- Good stiffness at thin gauges
- Good drawdown
- Excellent processability
- Can use straight or in blends with LDPE or HDPE
- Available with slip or high stabilization package
|
Marlex® 7308DK | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Increased stiffness
- Low creep
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags that require added stiffness
- Thin gauge applications
- General purpose packaging
|
Marlex® 7308FK | Lateinamerika |
This linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
- Good toughness properties
- Increased stiffness
- Low creep
- Good drawdown
- Excellent processing characteristics
- Use alone or in coextrusions; blends with other polyolefins
Typical blown film applications include:
- Industrial films and bags that require added stiffness
- Thin gauge applications
- General purpose packaging
|
Marlex® 9004 | Lateinamerika |
This high density polyethylene is an ethylene-hexene copolymer that is tailored for injection molded applications that require:
• Moderate flow
• Excellent impact strength
• Good stiffness
• Durability
Typical injection molded applications for 9004 include:
- Industrial pails (five-gallon)
- Pail and drum lids
This resin meets these specifications:
- ASTM D4976 - PE 233
- FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 9005 | Lateinamerika |
This high density polyethylene is an ethylene-hexene copolymer that is tailored for injection molded applications that require:
- Moderate flow
- Excellent impact strength
- Excellent ESCR
- Good warpage resistance
- Durability
Typical injection molded applications for 9005 include:
- Industrial parts
- Seats
- Food and household containers
- Agricultural parts
This resin meets these specifications:
- ASTM D4976 - PE 233
- FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)
- UL94HB yellow card per UL file EE349283
|
Marlex® 9006 | Europa |
This high density polyethylene is an ethylene-hexene copolymer that is tailored for injection molded applications that require:
- Moderate flow
- Excellent impact strength
- Good stiffness
- Durability
Typical injection molded applications for 9006 include:
- Industrial pails (five-gallon)
- Pail lids
- Automotive applications
- Foamed parts
This resin meets these specifications:
- ASTM D4976 - PE 233
- FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 9010 | Europa |
This high density polyethylene is an ethylene-hexene copolymer that is tailored for injection molded applications that require:
- Good flow performance
- High impact strength
- Excellent stiffness
Typical injection molded applications for 9010 include items such as:
- Caps and Closures
- Lids
- Containers and Carts
This resin meets these specifications:
- ASTM D4976 - PE 232
- FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)
|
Marlex® 9010C | Europa |
This high density polyethylene is an ethylene-hexene copolymer that is tailored for injection molded applications that require:
- Good flow performance
- Slip agent with good organoleptics and high oxidative stability
- High impact strength
- Excellent stiffness
Typical injection molded applications for 9010C include items such as:
- Caps
- Closures
- Containers
This resin meets these specifications:
- ASTM D4976 - PE 232
- FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)
|