Polyurethan (PUR): PUR-Ether
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
ADEKA AM series | Afrika und Mittlerer Osten |
Glycerin-PO / EO type
Coatings, adhesives, elastomers, sealants
|
ADEKA BM series | Afrika und Mittlerer Osten |
Ethylenediamine- PO / EO type
Rigid foams, semirigid foams, cross-linking agents
|
ADEKA BPX series | Afrika und Mittlerer Osten |
Bisphenol A-PO type
Coatings, adhesives, elastomers
|
ADEKA CM series | Afrika und Mittlerer Osten |
PG-PO / EO type
Coatings, adhesives, elastomers, sealants
|
ADEKA EDP series | Afrika und Mittlerer Osten |
PO modified ethylenediamine type
Rigid foams, semirigid foams, cross-linking agents
|
ADEKA FC-450 | Afrika und Mittlerer Osten |
Phosphorated flame-retardant polyols
Fire-retarding material (Rigid urethane foams)
|
ADEKA G series | Afrika und Mittlerer Osten |
Glycerin-PO type
Various polyurethane foams, coatings, elastomers
|
ADEKA GR series | Afrika und Mittlerer Osten |
Glycerin -PO / EO type
Water-absorbing urethane foams, adhesives
|
ADEKA P series | Afrika und Mittlerer Osten |
PG-PO type
Coatings, adhesives, elastomers, sealants
|
ADEKA PR series | Afrika und Mittlerer Osten |
PG-PO / EO type
Water-absorbing urethane foams, adhesives
|
ADEKA SC,SP series | Afrika und Mittlerer Osten |
PO modified sucrose/sorbitol type
Rigid foams, cross-linking agents
|
ADEKA T series | Afrika und Mittlerer Osten |
TMP-PO type
Rigid foams, semirigid foams, cross-linking agents
|
Desmoderm® 43191 | Afrika und Mittlerer Osten |
Desmoderm 43191 Granular is a one-component polyester polyether urethane based on an aromatic diisocyanate.
|
Desmoderm® VPLS 2262 | Afrika und Mittlerer Osten |
Desmoderm VP LS 2262 is a one-component polyether urethane based on an aromatic diisocyanate.
|
EFRHATAN 88 A | Europa |
EFRHATAN: is the trade-mark of our modified polyurethane-polyether flame retardant halogen free.
EFRHATAN 88 A: is a thermoplastic elastomeric polyurethane HFFR compound polyether basis.This compound offer outstanding chemical and hydrolysis resistance. The material exhibit excellent physical-mecanical performances resulting in tubes and sheatings with optimal kink resistance,strength characteristics and flame retardance. Good processability and excellent extrusion stability. Material to use on the production of cables for electronic devices connection and thechnical sheathing with matt surface.
Certify: UL 1581FT1
|
Evermore PUR UDA-10X | Asien Pazifik | |
Evermore PUR UDA-10XL | Asien Pazifik | |
Evermore PUR UDA-10XT | Asien Pazifik | |
Evermore PUR UP-9315N | Asien Pazifik | |
Evermore PUR UP-9320N | Asien Pazifik | |
Evermore PUR UP-9321N | Asien Pazifik | |
Evermore PUR UP-9330N | Asien Pazifik | |
Evermore PUR UP-9341NHR | Asien Pazifik | |
Evermore PUR UP-9396NHR | Asien Pazifik | |
Evermore PUR UP-9460NHR | Asien Pazifik | |
Generic PUR-Ether | Afrika und Mittlerer Osten |
This data represents typical values that have been calculated from all products classified as: Generic PUR-Ether
This information is provided for comparative purposes only.
|
Huafon JF-P-501 / JF-I-601 | Asien Pazifik |
Characteristics: Polyether resin of low hardness and low density.
Applications: For the insole.
|
Huafon JF-P-509 / JF-I-609T | Asien Pazifik |
Characteristics : Polyether resin of medium to high hardness. excellent temperature and hydrolysis resistance.
Applications: For man/woman shoes and casual shoes.
|
Huafon JF-P-526 / JF-I-609T | Asien Pazifik |
Characteristics: Polyether resin of medium to high hardness, excellent temperature and hydrolysis resistance.
Applications: For the midsole.
|
Huafon JF-P-528 / JF-I-609T | Asien Pazifik |
Characteristics: Polyether resin of high flexibility. excellent temperature and hydrolysis resistance.
Applications: For the boot.
|
Huafon JF-P-550S / JF-I-650 | Asien Pazifik |
Characteristics: Polyether resin of low hardness and low density.
Applications: For the insole.
|
Huafon JF-P-8985 / JF-I-5218 | Asien Pazifik |
Characteristics: Polyether resin of excellent physical performance. excellent temperature resistance and excellent hydrolysis resistance.
Applications: For buffers.
|
HydroMed™ D1 | Nordamerika |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D2 | Nordamerika |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D3 | Nordamerika |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D4 | Nordamerika |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D6 | Nordamerika |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D640 | Nordamerika |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D7 | Nordamerika |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroSlilp™ C | Nordamerika |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|