Fluoropolymer: Fomblin®
Product | Availability | Product Description |
---|---|---|
Fomblin® D2 | Africa & Middle East |
Fomblin® D2 is a dialcohol terminated PFPE. Thanks to its functional hydroxyl end-groups, can be used to modify polymeric materials such as urethanes, esters, epoxies and acrylates.
Fomblin® D2 is especially suitable as a building block and polymer modifier for those applications that require a combination of excellent water and oil repellency, easy removal of graffiti and fingerprints, low friction, low refractive index and high chemical resistance.
|
Fomblin® DA 410 | Africa & Middle East |
Based on proprietary technology, Syensqo has developed a line of patented PFPE additives to improve the performance of Fomblin® oils and greases. Fomblin® DA series are derived directly from Fomblin® PFPE's production process and contain functional groups.
Fomblin® DA410 is functionalized fluorinated product used as additive in perfluorinated grease to improve the performance at
high temperature in presence of metals. The physical properties of greases additivated with DA410 remain practically unchanged
compared to those of the non-additivated greases; volatility may increase slightly, depending on the base fluid, and oil separation may decrease. Depending on the base fluid, these greases can be used at temperatures to 250°C.
|
Fomblin® DA305 | Africa & Middle East |
Fomblin® DA305 is the optimum product for use with greases. Solutions of Fomblin® PFPE lubricants formulated with 5% (wt.) of DA305 are clear and stable in storage for over 1 year. These blends can be used in exactly the same manner as non-additivated Fomblin® lubricants for the production of greases. The physical properties of greases additivated with DA305 remain practically unchanged compared to those of the non-additivated greases; volatility may increase slightly, depending on the base fluid, and oil separation may decrease.
Depending on the base fluid, these greases can be used at temperatures ranging from -70 to 250 °C.
|
Fomblin® DA306/VAC | Africa & Middle East |
Fomblin® DA306/VAC is primarily recommended for formulations with Fomblin® Y-LVAC fluids. Solutions of Fomblin® lubricants additivated with 5% (wt.) of DA306/VAC are clear and stable in storage for over 1 year. It imparts antirust properties without significantly affecting the volatility and the viscosity of the original fluid, the typical physical properties remaining unchanged. The additive does not significantly affect either the ultimate pressure or the back-migration rate. Fluids additivated with DA306/VAC can be used at temperatures ranging from -70 to 250 °C.
|
Fomblin® LC200 | Africa & Middle East |
Fomblin® LC perfluoropolyether fluids have the following unique features:
- Excellent wear characteristics
- Very good temperature properties
- Cost effective
- Outstanding for application requiring low viscosity
|
Fomblin® M03 | Africa & Middle East |
Fomblin® M perfluoropolyether fluids have the following unique features:
- Excellent viscosity index
- Excellent low temperature torque values
- Very good extreme pressure (EP) characteristics
- Very low evaporative loss properties
- Good thermal stability
|
Fomblin® M07 | Africa & Middle East |
Fomblin® M perfluoropolyether fluids have the following unique features:
- Excellent viscosity index
- Excellent low temperature torque values
- Very good extreme pressure (EP) characteristics
- Very low evaporative loss properties
- Good thermal stability
|
Fomblin® M100 | Africa & Middle East |
Fomblin® M perfluoropolyether fluids have the following unique features:
- Excellent viscosity index
- Excellent low temperature torque values
- Very good extreme pressure (EP) characteristics
- Very low evaporative loss properties
- Good thermal stability
|
Fomblin® M15 RP | Africa & Middle East |
Fomblin® M perfluoropolyether fluids have the following unique features:
- Excellent viscosity index
- Excellent low temperature torque values
- Very good extreme pressure (EP) characteristics
- Very low evaporative loss properties
- Good thermal stability
Fomblin® M15RP is a clear solution containing a PFPE-soluble anti-rust additive, developed by Syensqo. The soluble additive is derived directly from Fomblin® PFPE's production process and contain functional groups, which can interact with the substrate and thereby improve surface protection.
|
Fomblin® M15 | Africa & Middle East |
Fomblin® M perfluoropolyether fluids have the following unique features:
- Excellent viscosity index
- Excellent low temperature torque values
- Very good extreme pressure (EP) characteristics
- Very low evaporative loss properties
- Good thermal stability
|
Fomblin® M30 RP | Africa & Middle East |
Fomblin® M perfluoropolyether fluids have the following unique features:
- Excellent viscosity index
- Excellent low temperature torque values
- Very good extreme pressure (EP) characteristics
- Very low evaporative loss properties
- Good thermal stability
Fomblin® M30RP is a clear solution containing a PFPE-soluble anti-rust additive, developed by Syensqo. The
soluble additive is derived directly from Fomblin® PFPE's production process and contain functional groups, which can interact with the substrate and thereby improve surface protection.
|
Fomblin® M30 | Africa & Middle East |
Fomblin® M perfluoropolyether fluids have the following unique features:
- Excellent viscosity index
- Excellent low temperature torque values
- Very good extreme pressure (EP) characteristics
- Very low evaporative loss properties
- Good thermal stability
|
Fomblin® M60 | Africa & Middle East |
Fomblin® M perfluoropolyether fluids have the following unique features:
- Excellent viscosity index
- Excellent low temperature torque values
- Very good extreme pressure (EP) characteristics
- Very low evaporative loss properties
- Good thermal stability
|
Fomblin® S VAC 250 | Africa & Middle East |
Fomblin® S VAC 250 is a new developed grade of PFPE lubricant for vacuum pump. Thanks to its high viscosity index, the film thickness at high temperature improve the lubrication performances of components in vacuum pump systems.
An optimum concentration of antirust additive was studied to provide protection against rust and at the same time to guarantee the physical properties and the vacuum performance of the grade.
|
Fomblin® T4 | Africa & Middle East |
Fomblin® T4 is a tetrafunctional, hydroxyl-terminated PFPE. Thanks to its functional hydroxyl end-groups, it can be used to modify polymers such as urethane esters, epoxies, and acrylates.
Fomblin® T4 is especially suitable as a building block and polymer modifier for those applications that require a combination of low refractive index, high chemical resistance, and low surface energy.
|
Fomblin® W150 | Africa & Middle East |
Fomblin® W perfluoropolyether fluids have the following unique features:
- Good low to high temperature performance
- Very good viscosity index
- Low to high temperature stability
- Low evaporative loss
|
Fomblin® W500 | Africa & Middle East |
Fomblin® W perfluoropolyether fluids have the following unique features:
- Good low to high temperature performance
- Very good viscosity index
- Low to high temperature stability
- Low evaporative loss
|
Fomblin® W800 | Africa & Middle East |
Fomblin® W perfluoropolyether fluids have the following unique features:
- Good low to high temperature performance
- Very good viscosity index
- Low to high temperature stability
- Low evaporative loss
|
Fomblin® Y HVAC 140/13 | Africa & Middle East |
Fomblin® Y PFPE perfluoropolyether fluids have the following unique features:
- Low vapor pressure
- Chemical inertness
- High thermal stability
- Good lubricant properties
- No flash or fire point
- Non-toxicity
- Excellent compatibility with metals, plastics, elastomers
- Good aqueous and non-aqueous solvent resistance
- High dielectric properties
- Low surface tension
- Good radiation stability
- Environmentally acceptable
|
Fomblin® Y LVAC 06/6 | Africa & Middle East |
Fomblin® Y PFPE perfluoropolyether fluids have the following unique features:
- Low vapor pressure
- Chemical inertness
- High thermal stability
- Good lubricant properties
- No flash or fire point
- Non-toxicity
- Excellent compatibility with metals, plastics, elastomers
- Good aqueous and non-aqueous solvent resistance
- High dielectric properties
- Low surface tension
- Good radiation stability
- Environmentally acceptable
|
Fomblin® Y LVAC 06/6RP | Africa & Middle East |
Fomblin® Y PFPE perfluoropolyether fluids have the following unique features:
- Low vapor pressure
- Chemical inertness
- High thermal stability
- Good lubricant properties
- No flash or fire point
- Non-toxicity
- Excellent compatibility with metals, plastics, elastomers
- Good aqueous and non-aqueous solvent resistance
- High dielectric properties
- Low surface tension
- Good radiation stability
- Environmentally acceptable
Rust Preventive formulation (LVAC RP) was studied to reduce or prevent rusting when huge amount of water vapors has to be pumped or when metal surfaces of the pump are exposed to moisture. An optimum concentration of additive in Fomblin® Y LVAC grades was studied to provide protection against rust and at the same time to guarantee the physical properties and the vacuum performance of the grade.
|
Fomblin® Y LVAC 14/6 | Africa & Middle East |
Fomblin® Y PFPE perfluoropolyether fluids have the following unique features:
- Low vapor pressure
- Chemical inertness
- High thermal stability
- Good lubricant properties
- No flash or fire point
- Non-toxicity
- Excellent compatibility with metals, plastics, elastomers
- Good aqueous and non-aqueous solvent resistance
- High dielectric properties
- Low surface tension
- Good radiation stability
- Environmentally acceptable
|
Fomblin® Y LVAC 16/6 | Africa & Middle East |
Fomblin® Y PFPE perfluoropolyether fluids have the following unique features:
- Low vapor pressure
- Chemical inertness
- High thermal stability
- Good lubricant properties
- No flash or fire point
- Non-toxicity
- Excellent compatibility with metals, plastics, elastomers
- Good aqueous and non-aqueous solvent resistance
- High dielectric properties
- Low surface tension
- Good radiation stability
- Environmentally acceptable
|
Fomblin® Y LVAC 25/6 | Africa & Middle East |
Fomblin® Y PFPE perfluoropolyether fluids have the following unique features:
- Low vapor pressure
- Chemical inertness
- High thermal stability
- Good lubricant properties
- No flash or fire point
- Non-toxicity
- Excellent compatibility with metals, plastics, elastomers
- Good aqueous and non-aqueous solvent resistance
- High dielectric properties
- Low surface tension
- Good radiation stability
- Environmentally acceptable
|
Fomblin® Y LVAC 25/6E | Africa & Middle East |
Fomblin® Y PFPE perfluoropolyether fluids have the following unique features:
- Low vapor pressure
- Chemical inertness
- High thermal stability
- Good lubricant properties
- No flash or fire point
- Non-toxicity
- Excellent compatibility with metals, plastics, elastomers
- Good aqueous and non-aqueous solvent resistance
- High dielectric properties
- Low surface tension
- Good radiation stability
- Environmentally acceptable
Rust Preventive formulation (LVAC E) was studied to reduce or prevent rusting when huge amount of water vapors has to be pumped or when metal surfaces of the pump are exposed to moisture. An optimum concentration of additive in Fomblin® Y LVAC grades was studied to provide protection against rust and at the same time to guarantee the physical properties and the vacuum performance of the grade.
|
Fomblin® Y04 | Africa & Middle East |
Fomblin® Y perfluoropolyether fluids have the following unique features:
- Excellent high temperature stability
- Good low temperature properties
- Very good extreme pressure (EP) and wear characteristics
- Low evaporative loss
- Good thermal index
|
Fomblin® Y06 | Africa & Middle East |
Fomblin® Y perfluoropolyether fluids have the following unique features:
- Excellent high temperature stability
- Good low temperature properties
- Very good extreme pressure (EP) and wear characteristics
- Low evaporative loss
- Good thermal index
|
Fomblin® Y15 | Africa & Middle East |
Fomblin® Y perfluoropolyether fluids have the following unique features:
- Excellent high temperature stability
- Good low temperature properties
- Very good extreme pressure (EP) and wear characteristics
- Low evaporative loss
- Good thermal index
|
Fomblin® Y25 | Africa & Middle East |
Fomblin® Y perfluoropolyether fluids have the following unique features:
- Excellent high temperature stability
- Good low temperature properties
- Very good extreme pressure (EP) and wear characteristics
- Low evaporative loss
- Good thermal index
|
Fomblin® Y45 | Africa & Middle East |
Fomblin® Y perfluoropolyether fluids have the following unique features:
- Excellent high temperature stability
- Good low temperature properties
- Very good extreme pressure (EP) and wear characteristics
- Low evaporative loss
- Good thermal index
|
Fomblin® Y-LOX 120 | Africa & Middle East |
Fomblin® Y-LOX 120 perfluoropolyether fluids have the following unique features:
- Outstanding chemical stability
- Thermal stability
- Lubrication properties
|
Fomblin® YPL1500 | Africa & Middle East |
Fomblin® Y perfluoropolyether fluids have the following unique features:
- Excellent high temperature stability
- Good low temperature properties
- Very good extreme pressure (EP) and wear characteristics
- Low evaporative loss
- Good thermal index
|
Fomblin® YR | Africa & Middle East |
Fomblin® Y perfluoropolyether fluids have the following unique features:
- Excellent high temperature stability
- Good low temperature properties
- Very good extreme pressure (EP) and wear characteristics
- Low evaporative loss
- Good thermal index
|
Fomblin® YR1800 | Africa & Middle East |
Fomblin® Y perfluoropolyether fluids have the following unique features:
- Excellent high temperature stability
- Good low temperature properties
- Very good extreme pressure (EP) and wear characteristics
- Low evaporative loss
- Good thermal index
|
Fomblin® YU700 | Africa & Middle East |
Fomblin® Y perfluoropolyether fluids have the following unique features:
- Excellent high temperature stability
- Good low temperature properties
- Very good extreme pressure (EP) and wear characteristics
- Low evaporative loss
- Good thermal index
|
Fomblin® Z03 | Africa & Middle East |
Fomblin® Z perfluoropolyether fluids have the following unique features:
- Good low temperature viscosity
- Superior evaporative loss
- Very high viscosity indices
- Very good extreme pressure (EP) and wear characteristics
|
Fomblin® Z15 | Africa & Middle East |
Fomblin® Z perfluoropolyether fluids have the following unique features:
- Good low temperature viscosity
- Superior evaporative loss
- Very high viscosity indices
- Very good extreme pressure (EP) and wear characteristics
|
Fomblin® Z25 | Africa & Middle East |
Fomblin® Z perfluoropolyether fluids have the following unique features:
- Good low temperature viscosity
- Superior evaporative loss
- Very high viscosity indices
- Very good extreme pressure (EP) and wear characteristics
|
Fomblin® Z60 | Africa & Middle East |
Fomblin® Z perfluoropolyether fluids have the following unique features:
- Good low temperature viscosity
- Superior evaporative loss
- Very high viscosity indices
- Very good extreme pressure (EP) and wear characteristics
|