Fluoropolymer: Fluon®
Product | Availability | Product Description |
---|---|---|
Fluon® ETFE Film | North America | |
Fluon® ETFE | North America |
Fluon®ETFE is a thermoplastic fluoropolymer developed by Asahi Glass. It is a copolymer comprising of tetrafluoroethylene (C2F4) and ethylene (C2H4). Fluon®ETFE is a balanced fluoropolymer that has chemical resistance and electrical propertiescomparable to typical fluoropolymers, such as PTFE, PFA and FEP and performs better than ECTFE or PVdF with its improved mechanical strength and very easy mouldability.
Applications:
- Electrical cables
- Tubes
- Casing
- Filament
- Moulded parts
- Films
|
Fluon® LM-ETFE 720AP | North America |
Fluon®LM-ETFE is a new fluororesin which combines the excellent heat resistant and mechanical properties of ETFE resin and the low melting point.
Features:
- The melting point is 30-40 °C lower than that of conventional ETFE resin.
- Film with excellent transparency can be produced.
- Easier processing thanks to a wide window of possible processing.
|
Fluon® LM-ETFE 730AP | North America |
Fluon®LM-ETFE is a new fluororesin which combines the excellent heat resistant and mechanical properties of ETFE resin and the low melting point.
Features:
- The melting point is 30-40 °C lower than that of conventional ETFE resin.
- Film with excellent transparency can be produced.
- Easier processing thanks to a wide window of possible processing.
|
Fluon® LM-ETFE 740AP | North America |
Fluon®LM-ETFE is a new fluororesin which combines the excellent heat resistant and mechanical properties of ETFE resin and the low melting point.
Features:
- The melting point is 30-40 °C lower than that of conventional ETFE resin.
- Film with excellent transparency can be produced.
- Easier processing thanks to a wide window of possible processing.
|
Fluon® LM-ETFE AH-2000 | North America |
Fluon® LM-ETFE AH series is a fluoro resin with adhesive properties, and is possible to adhere to other materials by melting. It can be applied directly without adhesive agent or surface treatment used in previous systems. Excellent adhesiveness of the two-layer system is effected in only one step. Conventional properties such as anti stick, ETFE mouldability and chemical resistance are the same as those of conventional ETFE.
|
Fluon® LM-ETFE AH-3000 | North America |
Fluon® LM-ETFE AH series is a fluoro resin with adhesive properties, and is possible to adhere to other materials by melting. It can be applied directly without adhesive agent or surface treatment used in previous systems. Excellent adhesiveness of the two-layer system is effected in only one step. Conventional properties such as anti stick, ETFE mouldability and chemical resistance are the same as those of conventional ETFE.
|
Fluon® PFA P-62XPT | North America |
Fluon®PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent characteristics and similar properties to PTFE but can be processed using conventional thermoplastic techniques, such as extrusion, injection moulding, blow moulding, or electrostatic powder coating. Fluon® PFA can be used within a wide temperature range from extremely low temperatures to 260°C maximum without losing its properties.
Fluon®PFA is the most suitable material for semiconductor equipment parts, which are in constant contact with strong chemicals.
Applications:
- High Flow Applications
|
Fluon® PFA P-63P | North America |
Fluon®PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent characteristics and similar properties to PTFE but can be processed using conventional thermoplastic techniques, such as extrusion, injection moulding, blow moulding, or electrostatic powder coating. Fluon® PFA can be used within a wide temperature range from extremely low temperatures to 260°C maximum without losing its properties.
Fluon®PFA is the most suitable material for semiconductor equipment parts, which are in constant contact with strong chemicals.
Applications:
- General Moulding
|
Fluon® PFA P-63PT | North America |
Fluon®PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent characteristics and similar properties to PTFE but can be processed using conventional thermoplastic techniques, such as extrusion, injection moulding, blow moulding, or electrostatic powder coating. Fluon® PFA can be used within a wide temperature range from extremely low temperatures to 260°C maximum without losing its properties.
Fluon®PFA is the most suitable material for semiconductor equipment parts, which are in constant contact with strong chemicals.
Applications:
- General Moulding
|
Fluon® PFA P-65P | North America |
Fluon®PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent characteristics and similar properties to PTFE but can be processed using conventional thermoplastic techniques, such as extrusion, injection moulding, blow moulding, or electrostatic powder coating. Fluon® PFA can be used within a wide temperature range from extremely low temperatures to 260°C maximum without losing its properties.
Fluon®PFA is the most suitable material for semiconductor equipment parts, which are in constant contact with strong chemicals.
Applications:
- Stress crack resistant lining
|
Fluon® PFA P-65PT | North America |
Fluon®PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent characteristics and similar properties to PTFE but can be processed using conventional thermoplastic techniques, such as extrusion, injection moulding, blow moulding, or electrostatic powder coating. Fluon® PFA can be used within a wide temperature range from extremely low temperatures to 260°C maximum without losing its properties.
Fluon®PFA is the most suitable material for semiconductor equipment parts, which are in constant contact with strong chemicals.
Applications:
- Stress crack resistant lining
|
Fluon® PFA P-66P | North America |
Fluon®PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent characteristics and similar properties to PTFE but can be processed using conventional thermoplastic techniques, such as extrusion, injection moulding, blow moulding, or electrostatic powder coating. Fluon® PFA can be used within a wide temperature range from extremely low temperatures to 260°C maximum without losing its properties.
Fluon®PFA is the most suitable material for semiconductor equipment parts, which are in constant contact with strong chemicals.
Applications:
- Stress crack resistant lining
|
Fluon® PFA P-66PT | North America |
Fluon®PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent characteristics and similar properties to PTFE but can be processed using conventional thermoplastic techniques, such as extrusion, injection moulding, blow moulding, or electrostatic powder coating. Fluon® PFA can be used within a wide temperature range from extremely low temperatures to 260°C maximum without losing its properties.
Fluon®PFA is the most suitable material for semiconductor equipment parts, which are in constant contact with strong chemicals.
Applications:
- Stress crack resistant lining
|
Fluon® PTFE CD097E | North America |
The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA.
The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid.
The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects.
Applications:
- Fine tubes
- Electrical wire coatings
Characteristics:
- High RR
- Excellent transparency
|
Fluon® PTFE CD123E | North America |
The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA.
The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid.
The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects.
Applications:
- Electrical tapes
- Pipes
- Hoses
Characteristics:
- High strength
- Low RR
|
Fluon® PTFE CD126E | North America |
The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA.
The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid.
The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects.
Applications:
- Stretch films
- Flat cables
Characteristics:
- Low RR
|
Fluon® PTFE CD145E | North America |
The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA.
The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid.
The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects.
Applications:
- Low density tapes
Characteristics:
- Low RR
|
Fluon® PTFE G163 | North America |
Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page.
Applications:
- large billet(300-1,500mm height) sheet moulding. feed stock.
Characteristics:
- fine particle powders.
- high tensile strength
- excellent surface finish.
- higher bulk density for G190 and G192.
|
Fluon® PTFE G190 | North America |
Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page.
Applications:
- large billet(300-1,500mm height) sheet moulding. feed stock.
Characteristics:
- fine particle powders.
- high tensile strength
- excellent surface finish.
- higher bulk density for G190 and G192.
|
Fluon® PTFE G192 | North America |
Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page.
Applications:
- large billet(300-1,500mm height) sheet moulding. feed stock.
Characteristics:
- fine particle powders.
- high tensile strength
- excellent surface finish.
- higher bulk density for G190 and G192.
|
Fluon® PTFE G201 | North America |
Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page.
Applications:
- rod (‹diameter 20mm) and pipe by ram extrusion
Characteristics:
- presintered polymer.
- high powder flow.
- lower crystallinity than G307.
|
Fluon® PTFE G307 | North America |
Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page.
Applications:
- general moulding for G307, G340 and G350
- automatic moulding for G307, G340 and G350
- isostatic moulding for G307, G340 and G350
- rod (›diameter 20mm) and pipe by ram extrusion for G307
Characteristics:
- agglomerated (free flowing) unsintered powders. the best powder flow for G307.
- good surface finish and high bulk density for G340 and G350 the highest bulk density for G350.
|
Fluon® PTFE G340 | North America |
Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page.
Applications:
- general moulding for G307, G340 and G350
- automatic moulding for G307, G340 and G350
- isostatic moulding for G307, G340 and G350
- rod (diameter 20mm) and pipe by ram extrusion for G307
Characteristics:
- agglomerated (free flowing) unsintered powders. the best powder flow for G307.
- good surface finish and high bulk density for G340 and G350 the highest bulk density for G350.
|
Fluon® PTFE G350 | North America |
Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page.
Applications:
- general moulding for G307, G340 and G350
- automatic moulding for G307, G340 and G350
- isostatic moulding for G307, G340 and G350
- rod (diameter 20mm) and pipe by ram extrusion for G307
Characteristics:
- agglomerated (free flowing) unsintered powders. the best powder flow for G307.
- good surface finish and high bulk density for G340 and G350 the highest bulk density for G350.
|
Fluon® PTFE PA1015Z | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- bearing
- gasket
- valvedisk
- V-ring
- O-ring
- plug
- valve
- sheet
- pump
- impeller
- mechanical seal
Characteristics:
- improved wear resistance.
- improved compression resistance
- filler can be damaged by strong base and hydrogen fluoride
- improved power flow for Z-type of PA
|
Fluon® PTFE PA1020Z | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- bearing
- gasket
- valvedisk
- V-ring
- O-ring
- plug
- valve
- sheet
- pump
- impeller
- mechanical seal
Characteristics:
- improved wear resistance.
- improved compression resistance
- filler can be damaged by strong base and hydrogen fluoride
- improved power flow for Z-type of PA
|
Fluon® PTFE PA1025Z | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- bearing
- gasket
- valvedisk
- V-ring
- O-ring
- plug
- valve
- sheet
- pump
- impeller
- mechanical seal
Characteristics:
- improved wear resistance.
- improved compression resistance
- filler can be damaged by strong base and hydrogen fluoride
- improved power flow for Z-type of PA
|
Fluon® PTFE PA3540LT | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- Bearing
- packing
|
Fluon® PTFE PA7115 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- packing
- oil seal
Features:
- improved wear resistance.
- less scratch on the mating material
|
Fluon® PTFE PB1202 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- piston ring
- bearing
- ball valve sheet
- bearing pad
- mechanical seal
Characteristics:
- improved wear resistance
- improved creep resistance
- improved stiffness hardness
|
Fluon® PTFE PB1205 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- piston ring
- bearing
- ball valve sheet
- bearing pad
- mechanical seal
Characteristics:
- improved wear resistance
- improved creep resistance
- improved stiffness hardness
|
Fluon® PTFE PB1211 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- piston ring
- bearing
- ball valve sheet
- bearing pad
- mechanical seal
Characteristics:
- improved wear resistance
- improved creep resistance
- improved stiffness hardness
|
Fluon® PTFE PB2015 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- piston ring
- bearing
- gasket
- shock-absorber
Characteristics:
- enhanced creep resistance
- small initial friction coefficient
- heavy load
- chemical resistance
|
Fluon® PTFE PB2510 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- piston ring
- bearing
- ball valve sheet
- bearing pad
- oil seal
Characteristics:
- improved wear resistance in water
- improved heavy load
- improved bending stength
|
Fluon® PTFE PB2515 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- piston ring
- bearing
- ball valve sheet
- bearing pad
- oil seal
Characteristics:
- improved wear resistance in water
- improved heavy load
- improved bending stength
|
Fluon® PTFE PB3060 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- bearing pad
Characteristics:
- improved wear resistance.
- improved compression resistance
- high conductivity because of metal filler
|
Fluon® PTFE PB3360T | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- bearing pad
Characteristics:
- improved wear resistance.
- improved compression resistance
- high conductivity because of metal filler
- anti-oxidizing
|
Fluon® PTFE RA3540 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Applications:
- Bearing
- packing
|
Fluon® PTFE RA7003 | North America |
Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables.
Features:
- Semi-conductive
- Anti-static
|