Polyamide (Nylon): Nylon, Unspecified
Product | Availability | Product Description |
---|---|---|
CALP HG2310A | Asia Pacific | |
Celanyl® XS3 GF40 TF10 NC 1102/A | Africa & Middle East |
Semi-aromatic polyamide blend, 40% glass fibre, with PTFE
Compound designed for tribological systems with high mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. It shows better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and excellent surface finish.
|
Celanyl® XS3 GF50 BK 9005/C | Africa & Middle East |
Semi-aromatic polyamide blend, 50% glass fibre, general purpose
Compound designed for parts with high mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. It shows better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and excellent surface finish.
|
Celanyl® XS3 GF50 BK 9005/V/FA | Africa & Middle East |
Semi-aromatic polyamide blend, 50% glass fibre, heat stabilized.
Compound designed for parts with high mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. It shows better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and excellent surface finish. Suitable for drinking water applications.
|
Celanyl® XS3 GF50 BK 9005/V | Africa & Middle East |
Semi-aromatic polyamide blend, 50% glass fibre
Compound designed for parts with high mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. It shows better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and excellent surface finish.
|
Celanyl® XS3 GF50 NC 1102/J | Africa & Middle East |
Semi-aromatic polyamide blend, 50% glass fibre, heat stabilized. UL listed [email protected].
Compound designed for parts with high mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. It shows better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and excellent surface finish.
|
Celanyl® XS3 GF60 BG 1019/C EF | Africa & Middle East |
Semi-aromatic polyamide blend, 60% glass fibre, heat stabilized.
Compound designed for parts with maximu mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. It shows better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and excellent surface finish.Â
|
Celanyl® XS3 GF60 BK 9005/C EF | Africa & Middle East |
Semi-aromatic polyamide blend, 60% glass fibre, heat stabilized.
Compound designed for parts with maximu mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. It shows better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and excellent surface finish.Â
|
Celanyl® XS3 GF60 GY 7040/C EF | Africa & Middle East |
Semi-aromatic polyamide blend, 60% glass fibre, heat stabilized.
Compound designed for parts with maximu mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. It shows better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and excellent surface finish.Â
|
Celanyl® XS3 GF60 WT 9016/C EF | Africa & Middle East |
Semi-aromatic polyamide blend, 60% glass fibre, heat stabilized.
Compound designed for parts with maximu mechanical requirements, typically used to replace metal due to the high stiffness and strength, stable after conditioning. It shows better creep behavior and dimensional stability vs. an equivalent PA66 grade, with lower warpage and excellent surface finish.Â
|
Comco Powerglide | Europe |
Application examples: By the lubricant, components of this material are suitable for for sliding elements with high load especially. Sliding parts, hoisting devices, pulleys, bearings, sockets, etc.
|
Conventus Black 601 | Asia Pacific |
High strength Nylon color concentrate intended for use with Nylon 6 and Nylon 66 polymers and compounds. Suggested let down ratio is 100 parts resin: 1 part concentrate by weight. However, this may differ depending on application and/or molding requirements.
|
DINALON® BPP1S10-7446 | Africa & Middle East |
PA Dinalon, Flexible, grey
|
DURAMIDE 6XMG35 | Asia Pacific |
Duramide 6XMG35 is a nylon based resin compound with a proprietary combination of fillers designed for structural performance, improved surface appearance, dimensional stability, and UV stability. Data sheet values below are for all colors.
|
Durethan® BC700HTS 900116 DUSXBL | Africa & Middle East |
Unreinforced, Blow Molding Grade, Heat Stabilized, Improved Impact
|
Durethan® BKV115H3.0 000000 | Africa & Middle East |
15% Glass Reinforced, Injection Molding, Heat Stabilized, Improved Impact
|
Durethan® BKV130 000000 | Africa & Middle East |
30% Glass Reinforced, Injection Molding, Improved Impact
|
Durethan® BKV130CS 600091 | Africa & Middle East |
30% Glass Reinforced, Injection Molding, Improved Impact
|
Durethan® BKV130GIT 900116 | Africa & Middle East |
30% Glass Reinforced, Injection Molding, Improved Impact
|
Durethan® BKV130H2.0 901510 | Africa & Middle East |
30% Glass Reinforced, Injection Molding, Heat Stabilized, Improved Impact
|
Durethan® BKV130H3.0 000000 | Africa & Middle East |
30% Glass Reinforced, Injection Molding, Heat Stabilized, Improved Impact
|
Durethan® BKV135 000000 | Africa & Middle East |
35% Glass Reinforced, Injection Molding, Improved Impact
|
Durethan® BKV140 000000 | Africa & Middle East |
40% Glass Reinforced, Injection Molding, Improved Impact
|
Durethan® BKV140H2.0 900051 | Africa & Middle East |
40% Glass Reinforced, Injection Molding, Heat Stabilized, Improved Impact
|
Durethan® BKV15 000000 DUS037 | Africa & Middle East |
15% Glass Reinforced, Injection Molding, Heat Stabilized
|
Durethan® BKV15 000000 | Africa & Middle East |
15% Glass Reinforced, Injection Molding
|
Durethan® BKV15H2.0 901510 SR1 | Africa & Middle East |
15% Glass Reinforced, Injection Molding, Heat Stabilized
|
Durethan® BKV15H2.0 901510 | Africa & Middle East |
15% Glass Reinforced, Injection Molding, Heat Stabilized
|
Durethan® BKV15W1 000000 DUS037 | Africa & Middle East |
15% Glass Reinforced, Injection Molding, Heat Stabilized
|
Durethan® BKV215 000000 | Africa & Middle East |
15% Glass Reinforced, Injection Molding, Improved Impact
|
Durethan® BKV215H2.0 900051 DUS035 | Africa & Middle East | |
Durethan® BKV215H2.0 901510 | Africa & Middle East |
15% Glass Reinforced, Injection Molding, Heat Stabilized, Improved Impact
|
Durethan® BKV215H3.0 000000 | Africa & Middle East |
15% Glass Reinforced, Injection Molding, Heat Stabilized, Improved Impact
|
Durethan® BKV215W1 902176 | Africa & Middle East |
15% Glass Reinforced, Injection Molding, Improved Impact
|
Durethan® BKV230H2.0 901510 | Africa & Middle East |
30% Glass Reinforced, Injection Molding, Heat Stabilized, Improved Impact
|
Durethan® BKV230H3.0 000000 | Africa & Middle East |
30% Glass Reinforced, Injection Molding, Heat Stabilized, Improved Impact
|
Durethan® BKV230W1 000000 | Africa & Middle East |
30% Glass Reinforced, Injection Molding, Improved Impact
|
Durethan® C38F 000000 | Africa & Middle East |
Unreinforced, Film Extrusion, Extrusion, Food Contact Quality, Transparent, Medium Viscosity, no additives
|
Durethan® C38FA 000000 | Africa & Middle East |
Unreinforced, Film Extrusion, Extrusion, Food Contact Quality, Medium Viscosity
|
Durethan® C38FAM 000000 | Africa & Middle East |
Unreinforced, Film Extrusion, Extrusion, Food Contact Quality
|