Prospector

Polyamide (Nylon): Nylon 11

Product Availability Product Description
ARMALLOY™ ARM-PA11HSLU-E NT ラテンアメリカ
Nylon 11, Lubricated, Heat Stabilized, UV Stabilized, Extrusion Grade, Natural
ColorFast® PA11 アジア太平洋地域
PA11 is a biobased nylon 11 with low moisture absorption and good chemical resistance. It is suitable for wide range of applications.
ColorFast® PA11GF10MD アジア太平洋地域
PA11 is a biobased nylon 11 with low moisture absorption and good chemical resistance. It is suitable for wide range of applications.
ColorRx® NY4-1000RX アジア太平洋地域
NY4-1000RX is a biobased injection molding grade of nylon 11 with low moisture absorption and good chemical resistance. It is suitable for healthcare applications.
EOS PA 1101 アジア太平洋地域
PA 1101 is a whitish polyamide 11 powder, which is optimised for the use as a laser sintering material. PA 1101 is made out of renewable raw materials (castor oil). The material is characterised by elasticity and high impact resistance. Properties - high elongation at break - elasticity - high impact resistance - excellent resistance to chemicals, especially hydrocarbons, aldehydes, ketones, mineral bases and salts, alcohols, fuels, detergents, oils and fats Acceptance criteria - cytotoxicity according to DIN EN ISO 10993-5 Typical applications - mechanically loaded functional prototypes and series parts with long-term moving elements (e.g. hinges) - in the automotive industry, it is mainly used for interior components for crash relevant parts (PA 1101 components do not splinter) - especially suited for small to medium sized parts, thin walls and lattice structures
Generic Nylon 11 - Glass Fiber アジア太平洋地域
This data represents typical values that have been calculated from all products classified as: Generic Nylon 11 - Glass Fiber This information is provided for comparative purposes only.
Generic Nylon 11 アジア太平洋地域
This data represents typical values that have been calculated from all products classified as: Generic Nylon 11 This information is provided for comparative purposes only.
HiFill® PA11 GB30 HS 北アメリカ  
HiFill® PA11 GF30 L UV 北アメリカ  
HiFill® PA11 GF7 HS L 北アメリカ  
HiFill® PA11 北アメリカ  
HP 3D High Reusability PA 11 アジア太平洋地域
Produce strong, ductile, functional parts - Thermoplastic material delivering optimal mechanical properties. - Renewable raw material from vegetable castor oil (reduced environmental impact). - Provides excellent chemical resistance and enhanced elongation-at-break. - Impact resistance and ductility for prostheses, insoles, sports goods, snap fits, living hinges, and more. Quality at the lowest cost per part - Achieve the lowest cost per part1 and reduce your total cost of ownership. - Minimize waste - reuse surplus powder batch after batch and get functional parts, no throwing away anymore. - Get consistent performance while achieving 70% surplus powder reusability. - Optimize cost and part quality - cost-efficient material with industry-leading surplus powder reusability. Engineered for HP Multi Jet Fusion technology - Designed for production of functional and final parts across a variety of industries. - Provides the best balance between performance and reusability. - Easy-to-process material enables high productivity, less waste, and lower cost. - Engineered to reliably produce final parts and functional prototypes with fine detail, dimensional accuracy.
LNP™ LUBRICOMP™ Compound HAL23 アジア太平洋地域
LNP LUBRICOMP HAL23 compound is based on Nylon 11 resin containing 15% aramid fiber, 10% PTFE. Added features of this grade include: Internally Lubricated, Wear Resistant.
LNP™ LUBRICOMP™ Compound HFG25Z アジア太平洋地域
LNP LUBRICOMP HFG25Z compound is based on Nylon 11 resin containing 25% glass fiber and graphite. Added features of this grade include: Wear Resistant.
LNP™ THERMOCOMP™ Compound HF006EU アジア太平洋地域
LNP THERMOCOMP HF006EU compound is based on Nylon 11 resin containing 30% glass fiber. Added features of this grade include: Easy Molding, UV-Stabilized.
LNP™ THERMOCOMP™ Compound HF008 アジア太平洋地域
LNP THERMOCOMP HF008 compound is based on Nylon 11 resin containing 40% glass fiber.
Plaslube® PA11 GF30 TL20 LE 北アメリカ  
PLUSTEK PD121BK10 アジア太平洋地域
PLUSTEK PD121BK10 is Black , Plasticized POLYAMIDE 11, Extrusion,flexible tubing Applications
REVOLVE® Rilsan Roto 11 アジア太平洋地域
Revolve Rilsan PA11 is a rotational moulding polyamide 11 (Nylon) designed to meet demanding requirements such as chemical resistance and low permeation to hydrocarbons (e.g. petrol). The grade exhibits high stiffness, good impact strength, low moisture absorption high temperature resistance and good mouldability.
Rilsan® BECNO TL アジア太平洋地域
Rilsan® BECNO TL resin is a polyamide produced from a renewable source. This natural grade is designed for cable coating. 11 The percentage of renewable carbon according to ASTM D 6866 (calculated) is >98%.
Rilsan® BECV BLUE T8L アジア太平洋地域
Rilsan® BECV BLUE T8L resin is a polyamide 11 produced from a renewable source. This blue coloured grade is designed for cable coating but is also suitable for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >95%.
Rilsan® BES BLACK PR アジア太平洋地域
Rilsan® BES BLACK PR resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion.
Rilsan® BESHV BLK T アジア太平洋地域
Rilsan® BESHV BLK T is an ultra high viscosity Polyamide 11 grade specifically designed to be extruded into large diameter thick wall pipe. This grade has been specifically engineered to achieve an outstanding balance of properties for Oil & Gas piping applications. It offers a cost effective system for non-metallic corrosion free fluid transfer in critical Oil and Gas industry applications. Rilsan® Polyamide 11 is a thermoplastic material permitted by the US Department of Transportation (DOT) under the Code of Federal Regulations (CFR) Title 49, Part 192, for gas distribution piping to be installed and operated at pressures up to and including 250 psi in a design factor of 0.40. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >95%.
Rilsan® BESN BLACK P123 TL アジア太平洋地域
Rilsan® BESN BLACK P123 TL resin is a flexible polyamide 11 produced from a renewable source. This black grade is designed for extrusion typically for cooling application and for Adblue circuits (SCR). The pourcentage of renewable carbon (calculated) is 67% (Value obtained from a calculation based on the composition of the raw material that are used to manufacture the product. Arkema has not made a specific measure on the product).
Rilsan® BESN BLACK P126 T6L アジア太平洋地域
Rilsan® BESN BLACK P126 T6L resin is a flexible polyamide 11 produced from a renewable source. This grade is designed for tube extrusion and has a high thermo-oxidative resistance. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >75%. Note that this document is a temporary technical data sheet.
Rilsan® BESN BLACK P20 TL アジア太平洋地域
Rilsan® BESN BLACK P20 TL resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >92%.
Rilsan® BESN BLACK P210 TL アジア太平洋地域
Rilsan® BESN BLACK P210 TL resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion. Rilsan® BESN BLACK P210 TL resin falls into the PA11-PHLY category according to DIN 73378 and fulfills all specifications according to DIN 74324, ISO 7628, NFR 12632, and SAEJ844. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >88%.
Rilsan® BESN BLACK P212 CTL アジア太平洋地域
Rilsan® PA 11 G BESN BLACK P212 CTL resin is a polyamide 11 produced from a renewable source. This black grade is specially designed for conductive multi-layers fuel line applications. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >55%.
Rilsan® BESN BLACK P40 TL アジア太平洋地域
Rilsan® BESN BLACK P40 TL resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >88%.
Rilsan® BESN BLACK P40 TL01 アジア太平洋地域
Rilsan® BESN BLACK P40 TL01 resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >89%.
Rilsan® BESN BLACK TL アジア太平洋地域
Rilsan® BESN BLACK TL resin is a polyamide 11 produced from a renewable source. This black grade is designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >97%.
Rilsan® BESN G9 TL アジア太平洋地域
Rilsan® BESN G9 TL resin is a polyamide 11 produced from a renewable source. This black grade with improved friction properties is designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >85%.
Rilsan® BESN YELLOW 41 TL アジア太平洋地域
Rilsan® BESN YELLOW 41 TL resin is a polyamide 11 produced from a renewable source. This yellow colored grade is designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >97%.
Rilsan® BESNO 23 TL4CC アジア太平洋地域
Rilsan® BESNO 23 TL4 CC resin is a polyamide 11 produced from a renewable source. This grade with good translucence properties is designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >90%.
Rilsan® BESNO MED アジア太平洋地域
Rilsan® BESNO MED resin is a polyamide 11 produced from a renewable source. This grade dedicated to extrusion offers the highest quality and it is specifically designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request, letters regarding USP Class VI compliance can be provided. The percentage of renewable carbon according to ASTM D 6866 (calculated) is 100%.
Rilsan® BESNO P20 TL アジア太平洋地域
Rilsan® BESNO P20 TL resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >93%.
Rilsan® BESNO P20 TLO アジア太平洋地域
Rilsan® BESNO P20 TLO resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. This grade contains a low amount of oligomers. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >93%.
Rilsan® BESNO P210 TL アジア太平洋地域
Rilsan® BESNO P210 TL resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. Rilsan® BESNO P210 TL resin falls into the PA11-PHLY category according to DIN 73378 and fulfils all specifications according to DIN 74324, ISO 7628, NFR 12632 and SAE J844 The percentage of renewable carbon according to ASTM D 6866 (calculated) is >89%.
Rilsan® BESNO P40 TL アジア太平洋地域
Rilsan® BESNO P40 TL resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >89%.
Rilsan® BESNO P40 TLO アジア太平洋地域
Rilsan® BESNO P40 TLO resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. This grade contains a low amount of oligomers. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >85%.