Polyamide (Nylon): Nylon 12
Product | Availability | Product Description |
---|---|---|
Rilsamid® MA 4411 NAT | Africa & Middle East |
Rilsamid® MA 4411 NAT resin is a natural polyamide. This grade is plasticized and designed for tube extrusion.
Rilsamid® MA 4411 NAT resin falls into the PA12-HIPHL category according to DIN 73378 (PA12-HIP, EHL, 22-004).
This grade is also available in black.
|
RTP 200 F AR 10 TFE 10 | Africa & Middle East |
Aramid Fiber - PTFE Lubricated - Preliminary Data
|
RTP 200 F GB 50 | Africa & Middle East |
Glass Bead - Preliminary Datasheet
|
RTP 200 F SI 2 | Africa & Middle East |
Silicone Lubricated
|
RTP 200 F TFE 15 | Africa & Middle East |
PTFE Lubricated
|
RTP 200 F TFE 20 SI | Africa & Middle East |
PTFE Lubricated - Silicone Lubricated
|
RTP 200 F TFE 20 | Africa & Middle East |
PTFE Lubricated
|
RTP 200 F TFE 5 SI 2 | Africa & Middle East |
PTFE Lubricated - Silicone Lubricated
|
RTP 200 F | Africa & Middle East |
Unfilled
|
RTP 201 F | Africa & Middle East |
Glass Fiber
|
RTP 203 F | Africa & Middle East |
Glass Fiber
|
RTP 205 F | Africa & Middle East |
Glass Fiber
|
RTP 207 F | Africa & Middle East |
Glass Fiber
|
RTP 281 F | Africa & Middle East |
Carbon Fiber
|
RTP 282 F | Africa & Middle East |
Carbon Fiber
|
RTP 283 F | Africa & Middle East |
Carbon Fiber
|
RTP 285 F TFE 10 HS L | Africa & Middle East |
Carbon Fiber - PTFE Lubricated - Heat Stabilized - Lubricated
|
RTP 285 F TFE 13 SI 2 | Africa & Middle East |
Carbon Fiber - PTFE Lubricated - Silicone Lubricated
|
RTP 285 F TFE 15 HS L | Africa & Middle East |
Carbon Fiber - PTFE Lubricated - Heat Stabilized - Lubricated
|
RTP 285 F | Africa & Middle East |
Carbon Fiber
|
RTP 299 F X 125585 H | Africa & Middle East |
Flame Retardant - Halogen Free
|
RTP 299 F X 147440 A (ISO) | Africa & Middle East |
Mineral - Electrically Conductive - EMI/RFI Shielding - Magnetically Attractive
|
RTP 299 F X 150148 | Africa & Middle East |
ESD Protection - Permanently Static Dissipative - Preliminary Datasheet
|
RTP 299 F X 161774 A EG (ISO) | Africa & Middle East |
Extrusion Grade - Impact Modified - Electrically Conductive - Preliminary Datasheet
|
Starflam® SF0067 | Europe |
Starflam SF0067 is a glass fiber reinforced, flame retardant PA12 for injection molded applications. The material is halogen free and red phosphorus free.
|
Stat-Tech™ NJ-15CF/000 black | Europe | |
Stat-Tech™ NJ-20CF/000 black | Europe | |
SUSTAMID® 12 GF 30 natural | Asia Pacific |
Typical characteristics
- Very high heat deflection temperature
- Excellent noise and vibration damping
- High abrasion resistance
- High stiffness
- Good compressive strength
- High mechanical strength
Typical industries
- Mechanical Engineering Industry
|
SUSTAMID® 12 natural | Asia Pacific |
Typical characteristics
- Low moisture absorption
- Very good stress cracking resistance
- Good impact strength
- Noise and vibration damping
- Good machinability
- Good adhesive properties
- Good weldability
- Maximum dimensional stability amongst the polyamides
Typical industries
- Electronics
- Chemical storage tanks
- Mechanical Engineering Industry
|
TECACOMP® PA12 GF30 black 3879 | Asia Pacific | |
Tepex® 206-C200(x)/45% | Africa & Middle East |
Tepex® dynalite 206-C200(x)/45%3K Carbon - PA12 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Titalon® 3150CF | Asia Pacific |
15% CARBON FIBER REINFORCED, WEAR RESISTANCE, HIGH IMPACT
|
Titalon® 3225AF | Asia Pacific |
ARAMID /PTFE FILLED,GLASS FIBER REINFORCED, SLIDING, WEAR RESISTANCE
|
Titalon® 3300CF | Asia Pacific |
30% CARBON FIBER REINFORCED, HIGH STRENGTH, HIGH CONDUCTIVE
|
Titalon® 3300GF | Asia Pacific |
30% GLASS FIBER REINFORCED,HIGH STRENGTH
|
Titalon® 3315TF | Asia Pacific |
30%GLASS FIBER REINFORCED,15%PTFE FILLED,HIGH STRENGTH, WEAR RESISTANCE
|
Titalon® 3400GF | Asia Pacific |
40% GLASS FIBER REINFORCED,HIGH STRENGTH
|
TRAMID® 4710PN2 | Asia Pacific |
TRAMID® provides good heat resistance, impact resistance, mechanical hardness, and chemical resistance.
TRAMID® is widely used in textiles, automotive industries, ranks, kitchen utensils, and sports apparel, for its low specific gravity,
high rigidity, and excellent processability.
|
TRAMID® 4710TR | Asia Pacific |
TRAMID® provides good heat resistance, impact resistance, mechanical hardness, and chemical resistance.
TRAMID® is widely used in textiles, automotive industries, ranks, kitchen utensils, and sports apparel, for its low specific gravity,
high rigidity, and excellent processability.
|
TRAMID® 4715 | Asia Pacific |
TRAMID® provides good heat resistance, impact resistance, mechanical hardness, and chemical resistance.
TRAMID® is widely used in textiles, automotive industries, ranks, kitchen utensils, and sports apparel, for its low specific gravity,
high rigidity, and excellent processability.
|