HiDura D0M NT0821 is a low viscosity, lubricated PA612 molding grade. It exhibits excellent flow and release making it suitable for injection molding of thin parts. It exhibits low moisture absorption, good chemical resistance and dimensional stability. PA612 offers a unique balance of thermal, mechanical and physical properties.

HiDura D0MP NT0805 is a nucleated, lubricated and low viscosity PA612 molding grade. It exhibits excellent flow, crystallization rate and release making it suitable for injection molding of thin parts (i.e. cable ties, battery seals, etc). It exhibits low moisture absorption, good chemical resistance and dimensional stability. PA612 offers a unique balance of thermal, mechanical and physical properties.

HiDura D0MW BK0804 is a weatherable, lubricated, low viscosity PA612 molding grade. It exhibits excellent flow and release making it suitable for injection molding of thin parts (e.g. cable ties). It exhibits low moisture absorption, good chemical resistance, dimensional stability and weather resistance making it ideal for outdoor applications. PA612 offers a unique balance of thermal, mechanical and physical properties.

HiDura D0X NT is a neat, low viscosity PA612 grade. Given its low melt viscosity and excellent flow, it is a suitable feedstock for injection molding of thin or highly filled parts and in certain extrusion applications. It exhibits low moisture absorption, good chemical resistance and dimensional stability. PA612 offers a unique balance of thermal, mechanical and physical properties.

HiDura D1MG33H BK0814 is a heat stabilized, 33% glass filled PA612 material designed for injection molding applications.

HiDura D1MG33H NT0863 is a heat stabilized, 33% glass filled PA612 designed for injection molding applications.

HiDura D1MG33J BK0816 is an organically heat stabilized, 33% glass filled PA612 designed for injection molding applications.

HiDura D1MG33J NT0864 is an organically heat stabilized, 33% glass filled PA612 designed for injection molding applications.

HiDura D1X NT is a low-medium viscosity PA612 grade. It is suitable for monofilament, film and general purpose injection molding applications. It exhibits low moisture absorption, good chemical resistance, dimensional stability and high impact resilience. PA612 offers a unique balance of thermal, mechanical and physical properties.

HiDura D1XA NT is a low-medium viscosity PA612 grade. It is suitable for monofilament, film and general purpose injection molding applications. It exhibits low moisture absorption, good chemical resistance, dimensional stability and high impact resilience. PA612 offers a unique balance of thermal, mechanical and physical properties.

HiDura D1XI2J BK0842 is a low viscosity, medium impact modified, and heat stabilized PA612 grade. It is suitable for profile and pipe extrusions. It exhibits low moisture absorption, good chemical resistance, dimensional stability, and high impact resistance. PA612 offers a unique balance of thermal, mechanical, and physical properties.

HiDura D2X NT is a medium-high viscosity PA612 grade. It is suitable for monofilament, film and profile extrusion applications. It exhibits low moisture absorption, good chemical resistance, dimensional stability and high impact resilience. PA612 offers a unique balance of thermal, mechanical and physical properties.

HiDura D3X NT is a high viscosity PA612 grade. It is suitable for monofilament, film and profile extrusion applications; it can also be used for molded applications where high abrasion resistance and ductility are key requirements. It exhibits low moisture absorption, good chemical resistance, dimensional stability, and high impact resilience. PA612 offers a unique balance of thermal, mechanical and physical properties.

HiDura D3XI3J BK0808 is a high viscosity, low impact modified, and heat stabilized PA612 grade. It is suitable for profile and pipe extrusions. It exhibits low moisture absorption, good chemical resistance, dimensional stability, and high impact resistance.  This grade offers high burst pressures for extruded tubing systems.  PA612 offers a unique balance of thermal, mechanical, and physical properties.

HiDura LUX H3X NT0853 is a polyamide 6I/6T copolymer grade. It can be used for film applications to enhance processability, shrink, and thermoforming characteristics.

HiDura MED AG33 NT is an injection moldable glass fiber reinforced PA66 resin designed for healthcare applications. It is characterized by excellent strength & stiffness for structural needs. The product is compliant to ISO 10993-5 and ISO 10993-10. It is very easy to color and exhibits good property retention after most sterilization methods.

HiDura MED AI1 NT0861 is a high impact-modified PA66 resin designed for healthcare applications. The product provides all the processing and performance advantages of PA66 with excellent impact strength even at low temperatures and can be easily colored. This product offers a combination of engineering properties characterized by excellent toughness and flexibility; high melt point; and resistance to many chemicals including disinfectants. The product is compliant to ISO 10993-5 and ISO 10993-10. It exhibits good property retention after most sterilization methods.

HiDura MED AP NT0860 is an unfilled resin designed for healthcare applications. It is a lubricated PA66 resin with fast cycle times even in large cavitation tools for higher productivity and can easily be colored. This product offers a combination of engineering properties characterized by high strength; rigidity; good toughness; high melt point; good surface lubricity; abrasion resistance; and resistance to many chemicals including disinfectants. The product is compliant to ISO 10993-5 and ISO 10993-10. It exhibits good property retention after most sterilization methods.

HiDura PTR 75HB NT0679 is a high-viscosity, heat-stabilized polyamide copolymer resin designed for extrusion applications. This product is available in natural only. It offers a well-balanced combination of engineering properties characterized by high melt point, high strength and flexibly, toughness and good chemical resistance. Specifically, its reduced crystallization, high melt point and heat stabilization make it a great solution for films being used in cooking or autoclave curing applications.

HiDura PTR 75HF is a medium-high-viscosity, heat-stabilized PA66/6 copolymer resin designed for extrusion applications. This product is available in natural only. It offers a well-balanced combination of engineering properties characterized by high melt point, high strength, and flexibility, toughness, and good chemical resistance.

HiDura PTR 833C is a polyamide copolymer that features high strength, flexibility, and toughness. It offers melt viscosity and crystallization rate suitable for cast film, mono- and biaxially oriented film, and some blown film applications.

HiDura PTR 833F is a polyamide copolymer that features high strength, flexibility, toughness, and slow crystallization. It offers melt viscosity and crystallization rate suitable for cast film, mono- and biaxially oriented film, and some blown film applications.

HiDura PTR 840F is a polyamide copolymer that features good melt strength, flexibility, toughness, and slow crystallization. It offers melt viscosity and crystallization rate suitable for blown film, multi-bubble blown film, and thermoforming.

HiDura PTR 842A NT0733 is a high-viscosity polyamide copolymer resin designed for extrusion applications. This product is available in natural only. It offers a well-balanced combination of properties characterized by high melt point, high strength, flexibility, toughness, and good chemical resistance. Its reduced crystallization rate vs PA66 combined and high melt point make it an ideal solution for film applications requiring good process-ability and high heat resistance.

HiDura S1X NT is a low-medium viscosity PA610 grade with 62% bio-based content. It is suitable for monofilament, film, and general purpose injection molding applications. PA610 offers a unique balance of thermal, mechanical, and physical properties.

HiDura S2X NT is a medium viscosity PA610 grade with 62% bio-based content. It is suitable for monofilament, film, and general purpose injection molding applications. PA610 offers a unique balance of thermal, mechanical, and physical properties.

HiDura S3MG30H BK0835 is a 30% glass fiber reinforced, heat stabilized polyamide 610 with 42% bio-based content for injection molding applications.

HiDura S3X NT is a high viscosity PA610 grade with 62% bio-based content.  It is suitable for monofilament, film, and general purpose injection molding applications; it can also be used for molded applications where high abrasion resistance and ductility are key requirements. PA610 offers a unique balance of thermal, mechanical, and physical properties.

HiDura ThermaPlus 24XLR8 BK0825 is a heat stabilized PA66 product designed for injection molding applications that is designed to maintain mechanical properties after extended exposure to temperatures up to 160 C.

HiDura ThermaPlus 24XLR8 NT0823 is a heat stabilized PA66 product designed for injection molding applications that is designed to maintain mechanical properties after extended exposure to temperatures up to 160 C.

ReDefyne IAG25 BK0806 is a (PA66 + PA6) 25% glass fiber filled black pre-consumer recycled grade with added impact for flexibility and strength.

ReDefyne IAI2H BK0858 is a 100% pre-consumer recycled polymer, medium impact modified, heat stabilized PA66. This product balances strength, ductility and thermal resistance making it an excellent choice for automotive fastener applications.

Starflam 315J BK0707 (formerly Vydyne® ECO315J BK0707) is a non-halogenated, unfilled, flame-retardant PA66/6 copolymer with excellent toughness and ductility. 315J BK0707 is also lubricated for machine feed and easy mold release.

Starflam 315J NT0725 (formerly Vydyne® ECO315J NT0725) is a non-halogenated, unreinforced, flame-retardant PA66/6 co-polymer compound designed with high ductility (20% elongation), high comparative tracking index (CTI), and low corrosion for improved electrical contact performance. It is stabilized to provide heat stability up to 125°C for 1,000 hours in a dry environment. It exhibits excellent toughness and ductility, allowing increased flexibility in product design needed for living hinges and snap fits. 315J NT0725 provides enhanced flow and is lubricated for machine feed and easy mold release.

Starflam 366 BK13 (formerly Vydyne® ECO366 BK13) is a non-halogenated, unreinforced, flame-retardant PA66 compound designed with high comparative tracking index (CTI) and low corrosion for improved electrical contact performance. It has superior flow properties to assist in filling thin-walled, intricate parts with reduced warpage and reduced cycle time. It is lubricated for machine feed and easy mold release. It is f1 rated in black.

Starflam 366 (formerly Vydyne® ECO366) is a non-halogenated, unreinforced, flame-retardant PA66 compound designed with high comparative tracking index (CTI) and low corrosion for improved electrical contact performance. It has superior flow properties to assist in filling thin-walled, intricate parts with reduced warpage and reduced cycle time. It is lubricated for machine feed and easy mold release.

Starflam 366H NT0708 (formerly Vydyne® ECO366H NT0708) is an unfilled, heat stabilized PA66, containing a non-halogen flame retardant. 366H NT0708 is designed for electrical and electronic components and offers outstanding RTI Electrical performance of 150°C and UL94 V0 at 0.2mm thickness.

Starflam 377H NT0801 is an unfilled, PA66 homo-polymer utilizing a non-halogen flame retardant, designed with superior flow properties to assist in filling thin-walled, intricate parts. It is heat stabilized to provide best in class RTI. 377H NT0801 is also lubricated for machine feed, easy mold release and formulated with enhanced ductility.

Starflam 515H NT0867 is a non-halogenated flame retardant, 15% glass fiber, heat stabilized PA66. 515H NT0867 has improved stiffness and strength.

Starflam 525H BK0771 (formerly Vydyne® ECO525H BK0771) is a 25% glass reinforced PA66, heat stabilized, flame retardant that is halogen and red phosphorous free.