CALIBRE™ 502-3 TC0302156 tinted polycarbonate resin is specially designed to provide increased fatigue resistance in extruded solid sheets. The resin is UV stabilized but sheets for outdoor applications require a protective UV-absorbing cap layer. It is recommended to coextrude a 50 micron thick cap layer from CALIBRE 320UV. CALIBRE 502-3 TC0302156 is also suitable to extrude corrugated solid sheet thanks to its low melt sagging. Main Characteristics - Fatigue resistance - Low melt sagging Applications - Flat solid polycarbonate sheet - Floor mats - Corrugated solid sheet

CALIBRE™ 503-5 tinted polycarbonate resin is specially designed for multi-wall sheet extrusion. Its high melt strength allows effective calibration of a wide range of multi-wall sheet structures from low to medium complexity, such as two to five wall sheets. CALIBRE 503-5 is specially designed to offer a significantly better sheet surface quality at higher line speeds than a standard linear polycarbonate resin such as CALIBRE 302-5, and has a reduced tendency to display chatter marks. CALIBRE 503-5 is UV stabilized but sheets for outdoor applications require a protective UV-absorbing cap layer. It is recommended to coextrude a 50 micron thick cap layer from CALIBRE 320UV. Main Characteristics: - High melt strength: production of low to medium complexity multi-wall sheets - Improved sheet surface quality - Excellent optical properties: reduction in chatter marks Applications: - Multi-wall sheet extrusion

CALIBRE™ 5101 Polycarbonate resin is 10% glass-reinforced and provides increased modulus and improved heat distortion resistance with minimal shrinkage. CALIBRE 5101 resin has undergone biocompatibility testing based on ISO 10993 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. Main Characteristics: - Glass reinforced - Contains Mold Release - UL Rated V-2 and V-0 - Tested under ISO 10993 Applications - Information Technology Equipment - Telecommunications - Medical applications - Surgical Device Handles - Dialyzer

CALIBRE™ 5201-12 polycarbonate resin is 20% glass reinforced and provides increased modulus and improved heat distortion resistance with minimal shrinkage. CALIBRE 5201-12 resin has undergone biocompatibility testing based on ISO 10993 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. Main Characteristics: - Glass reinforced - Contains Mold Release - UL Rated V-2 and V-0 - Tested under ISO 10993 Applications: - Medical applications - Handheld surgical devices - Powered medical devices - Equipment housings - Electrical components

CALIBRE™ 5201-8 polycarbonate resin is 20% glass reinforced containing mold release for optimal processing. This resin exhibits high modulus and excellent dimensional stability. CALIBRE 5201-8 resin is typically used in electrical market applications. CALIBRE 5201-8 resin has undergone biocompatibility testing based on ISO 10993 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. Main Characteristics: - Glass reinforced - Ignition resistant - Tested under ISO 10993 Applications: - Electrical boxes - Lighting components - Electrical connectors - Medical applications

CALIBRE™ 5201S-12 polycarbonate resin is 20% glass reinforced and contains silicone for improved lubricity. This resin exhibits high modulus and excellent dimensional stability. CALIBRE 5201S-12 has been tested according to ISO 10993 (Biological Evaluation of Medical Devices). It is suitable for radiation, ethylene oxide, and steam sterilization as needed in the health care industry. Main Characteristics: - Tested under ISO 10993 - Lubricious Applications: - Medical applications - Surgical device handles

CALIBRE™ 603-2 is a tinted branched polycarbonate resin specially designed for extrusion of super heavy wall sheet and very complex profiles. CALIBRE™ 603-2 offers exceptional high melt strength for effective calibration of the most complex structures together with excellent surface quality. CALIBRE™ 603-2 is UV stabilized but sheets for outdoor applications require a protective UV-absorbing cap layer. It is recommended to coextrude a 50 micron thick cap layer from CALIBRE 320UV. Govt. and Industry Standards: - Underwriters Laboratory, Inc. (UL) Main Characteristics: - Highest melt strength - Excellent impact resistance Applications - Complex multi wall sheet extrusion - Complex profile extrusion - Blow molding bottles

CALIBRE™ 603-3 is a tinted branched polycarbonate resin specially designed for extrusion of profiles, corrugated sheet and very complex multi-wall sheet. CALIBRE™ 603-3 offers a very high melt strength for effective calibration of complex multi-wall sheet structures, such as a seven wall sheet or more, and to calibrate effectively complex profiles and corrugated sheet. CALIBRE™ 603-3 is UV stabilized but sheets for outdoor applications require a protective UV-absorbing cap layer. It is recommended to coextrude a 50 micron thick cap layer from CALIBRE 320UV. Govt. and Industry Standards: - Underwriters Laboratory, Inc. (UL) Main Characteristics: - Very high melt strength - Good impact resistance Applications: - Complex multi-wall sheet - Profile extrusion - Blow molded bottles

CALIBRE™ 603-6 is a tinted branched polycarbonate resin specially designed for multi-wall sheet extrusion. CALIBRE 603-6 offers a high melt strength for effective calibration of a wide range of multi-wall sheet structures from low to high complexity. CALIBRE 603-6 offers a wider processing window than CALIBRE 503-5 and is likewise specially designed to give excellent sheet surface quality at high line speeds with a reduced tendency to display chatter marks. CALIBRE 603-6 is UV stabilized but sheets for outdoor applications require a protective UV-absorbing cap layer. It is recommended to coextrude a 50 micron thick cap layer from CALIBRE 320UV. Govt. and Industry Standards: - Underwriters Laboratory, Inc. (UL) Main Characteristics: - Wide processing window - High surface quality - Minimizes chatter marks Applications: - Low to high complexity multi-wall sheets

CALIBRE™ 621-2 branched polycarbonate resin is specifically designed for large extrusion blow molded or injection-stretch blow molded water bottles. Specific rheological behaviour has been engineered into CALIBRE™ 621-2 to provide excellent processability during blow molding operations. The excellent processability, practical toughness, exceptional optics, and food compliance properties of CALIBRE™ 621-2 enable a host of successful applications. CALIBRE™ 621-2 is blue tinted. Govt. and Industry Standards: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1580 (with Restrictions) Applications: - Blow Molded Water Bottles - Appliance industry

CALIBRE™ EV30-15 advanced resin is a transparent, ignition resistant PC resin that contains no chlorinated, brominated or phosphate flame retardant additives. The resin is designed to meet the German norm DIN VDE-0472/Part 815 on halogens. This resin combines good mechanical and high heat properties and maintains excellent processability, contains mould release agent and is UV stabilized. CALIBRE™ EV30-15 has a UL 94 V-0 rating at 1.8 mm. Applications: - Cylindrical cell holder for UV curing process - Transparent cell cover

CALIBRE™ EV 30-7 advanced resin is a transparent, ignition resistant PC resin that contains no chlorinated, brominated or phosphate flame retardant additives. The resin is designed to meet the German norm DIN VDE-0472/Part 815 on halogens. This resin combines good mechanical and high RTI properties, ensuring longer sustained aesthetics and mechanical resistance, to the applications. CALIBRE™ EV30-7 has a UL 94 V-0 rating at 1.5 mm, and contains mould release agent and UV stabilizer. Applications: - Cylindrical cell holder for UV curing process - Transparent cell cover

Trinseo CALIBRE™ EV10 is an ignition resistant polycarbonate (PC) resin that contains no chlorinated or brominated or phosphorous based flame retardants and provides superior ignition resistance. This resin combines good mechanical and high heat properties and maintains excellent processability. It is an easy flow PC resin suitable for use in injection molded applications in tab holder and endplate for pouch cell, module top cover, wire harness isolation plate markets.CALIBRE™ EV10 has a UL94 V-0 rating at 1.0 mm.

CALIBRE™ EV20 E70 Advanced Resin is a specially designed Polycarbonate blends containing 70% post-consumer recycled(PCR) content. It combines high flow, high heat, high mechanical and high gloss together. It has excellent fire resistance and process stability. CALIBRE™ EV20 E70 Advanced Resin can be used in a wide application field where aesthetics, fire resistance and mechanical reliability are required. It does not contain Chlorine and Bromine additives.CALIBRE™ EV20 E70 has a UL94 V-0 rating at 1.0 mm. Applications: - Battery module top cover - Wire harness isolation plate

CALIBRE™ EV20 is a specially designed ignition-resistant polycarbonate alloy. It combines high flow, high heat and high strength together. It is especially suited for thin-wall applications and has excellent high gloss aesthetics. CALIBRE™ EV20 has a UL94 V-0 rating at 1.0 mm. This material does not contain chlorinated or brominated flame retardant additives. Applications: - Battery module top cover - Wire harness isolation plate

CALIBRE™ EV21 E50 Advanced Resin is a developmental grade, ignition-resistance PC blends containing 50% post-consumer recycled(PCR) materials and contain no chlorine or bromine additives. The resin provides superior processability for molding thin-wall parts and optimize cycle time productivity in injection molding operations. CALIBRE™ EV21 E50 has a UL94 V-0 rating at 0.7 mm. Applications: - Cylindrical cell holder

CALIBRE™ EV22 GF30 Advanced Resin is a 30% glass fiber reinforced high flow ignition resistant polycarbonate resin. This resin does not contain brominated or chlorinated flame retardant additives. CALIBRE™ EV22 GF30 is designed with superior processability for use in structural parts of module endplate for battery pack application. CALIBRE™ EV22 GF30 has a UL 94 V-0 rating at 1.0 mm. Applications: - Battery module endplate

CALIBRE™ EV31 GF10-15 Advanced Resin is an ignition-resistant, 10% glass reinforced polycarbonate resin. This resin does not contain brominated or chlorinated flame retardant additives. It is a medium flow PC resin with a mold release system, intended for applications requiring high stiffness. CALIBRE™ EV31 GF10-15 has a UL94 V-0 rating at 1.5 mm. Applications: - Battery module endplate

CALIBRE™ EV32 GF20 Advanced Resin is an ignition-resistant, 20 % glass reinforced polycarbonate resin. This resin does not contain brominated or chlorinated flame retardant additives (DIN VDE-0472/Part 815). It is a medium flow PC resin with a mold release system, intended for injection molding applications requiring high stiffness, thin wall. CALIBRE™ EV32 GF20 has a UL94 V-0 rating at 1.5 mm. Applications: - Battery module endplate

CALIBRE™ EV33-22 advanced resin is an opaque/translucent, ultraviolet light resistance and ignition resistant polycarbonate resin. This resin contains no chlorinated, brominated or phosphate flame retardant additives and is intended to comply with global environmental standards. It combines mechanical performance and high heat resistance with excellent processing characteristics in injection molded applications. This resin contains mold release and it is UV stabilized. CALIBRE™ EV33-22 has a UL 94 V-0 rating at 1.5 mm and UL 5VA rating at 3.0 mm. Applications: - Tab holder for pouch cell - Endplate for pouch cell

CALIBRE™ EV34 GF30 is an ignition-resistance,30% galss reinforced, polycarbonate resin containing no bromine,chlorine additives. It is easy flow resin with a mold release system designed for thin wall injection moulding applications. CALIBRE™ EV34 GF30 has a UL94 V-0 rating at 2.0 mm. Applications: - Battery module endplate

CALIBRE™ EV40 GF20 Advanced Resin is a 20% glass fiber reinforced high flow ignition resistant polycarbonate resin. This grade provides flame rating UL 94 V0 at 1.6 mm without the use of brominated or chlorinated flame retardant additives. It has superior processability and is ideal for structural frame components which are moving towards thinner wall sections. Applications: - Pouch cell frame.

CALIBRE™ IM 401-11 Impact Modified Polycarbonate resin is available in opaque formulations that offer benefits ranging from superior low temperature impact strength to easy processing with improved impact strengths. Main Characteristics: - Impact modified - Superior low temperature toughness Applications: - Automotive interiors - Automotive exteriors - Low temperature applications

CALIBRE™ IM 401-18 Impact Modified Polycarbonate resins is available in opaque formulations that offer benefits ranging from superior low temperature impact strength to easy processing with improved impact strength. Main Characteristics: - Impact modified - Superior low temperature toughness Applications: - Automotive interiors - Automotive exteriors - Low temperature appliances

CALIBRE™ MEGARAD 2081-15 Polycarbonate resin is an injection molding grade designed to reduce the color shift associated with exposure to high energy radiation such as gamma or e-beam sterilization. CALIBRE MEGARAD 2081-15 resin can reduce the sterilization color shift by 50% compared to general purpose polycarbonate resins. CALIBRE 2081-15 resin has undergone biocompatibility testing based on ISO 10993 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. It is available in several purple tint levels depending on the desired appearance. Main Characteristics: - Stabilized for gamma and e-beam sterilization - Tested under ISO 10993 - Transparent - Contains mold release Applications: - Medical applications

CALIBRE™ MEGARAD™ 2081-22 Polycarbonate resin is a high-flow resin designed for injection molded medical parts. It is stabilized to reduce color shift associated with exposure to high energy radiation (gamma or electron-beam). It is available in light purple transparent color designation FC030006. Main Characteristics: - Stabilized for high-energy radiation - Transparent - Contains mold release - Tested under ISO 10993 and USP Applications: - Medical applications

CALIBRE™ MEGARAD™ 2081-6LR Polycarbonate resin was developed for medical applications requiring improved resistance to lipids over standard polycarbonate resins. When exposed to a 20% intralipid emulsion solution under strained conditions, CALIBRE MEGARAD 2081-6LR exhibits significant property retention compared to standard polycarbonate. It also provides end-users of radiation sterilized medical devices a color closer to the water-clear look of the natural resin. When exposed to high energy radiation (gamma or electron beam), CALIBRE MEGARAD 2081-6LR can reduce the color shift by 50% compared to general purpose polycarbonate resins. CALIBRE MEGARAD 2081-6LR has been evaluated with respect to ISO 10993 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. Main Characteristics - Improved lipid resistance - Stabilized for high-energy radiation - Transparent - Contains mold release - Tested under ISO 10993 Applications - Medical applications - Fluid Delivery applications

CALIBRE™ MEGARAD™ 2091 Polycarbonate Resin is designed for medical devices that require oxygen-free gamma sterilization. Under these conditions, this material delivers an accelerated color recovery. In addition, the resins have a more water white appearance rather than the traditional purple tinted resin used to compensate for these sterilization methods. CALIBRE™ MEGARAD™ 2091-15 Polycarbonate Resin has undergone biocompatibility testing based on ISO 10993 standards (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. Main Characteristics - Tested under ISO 10993 - Contains mold Release - Suitable for Oxygen-free radiation sterilization Applications - Medical Applications - Dialyzer

PC %30 glass fiber

PC %5 glass fiber reinforced

Carbo-Rite™ B-980 is a reinforced Polycarbonate compound with carbon powder added for electrical consistency. Carbo-Rite™ B-980 solves a wide range of electronic handling problems through consistent dimensional stability and ESD performance.