Makrofol® LM322 2-4 160006 is an extruded polycarbonate film filled with light-scattering agent. It displays a smooth homogenous illumination of the front side of a backlight part even if a point source light is applied. The thickness of Makrofol® LM322 2-4 160006 is 300 microns. Other thicknesses on request. Surface structure is gloss/fine matte (2-surface/4-surface). Typical applications are automotive instrument panels and backlight displays.

Makrofol® LM903 1-4 160008 is an opaque white extruded film based on Makrolon Polycarbonate. It offers the high light reflection which is designed to apply in the field of LCD backlight and LED backlight. Makrofol® LM903 1-4 160008 is available in the thicknesses range of of 300 to 700 µm. Other thicknesses are on request. The surface combination is one side gloss and one side matte.

Makrofol® LM905 2-4 160009 is an extruded polycarbonate film filled with a light-scattering agent. It displays a smooth homogenous illumination of the front side of a backlit part even if a point source light is applied. Makrofol® LM905 2-4 160009 is available in standard thicknesses of 300 microns and 500 microns. Typical applications are automotive instrument panels and backlight displays.

Makrofol MA507 1-1 060040 is an extrusion film based on Makrolon® polycarbonate. Makrofol MA507 1-1 060040 comprises excellent transparency, high optical quality and impact resistance. The typical application is thermoformed packaging for EtO, steam and gamma sterilization. Each new cycle of sterilization with high-energy radiation may result in an increased yellowing of material. Makrofol MA507 1-1 060040 is available in various standard thicknesses from 0.015 ” to 0.030 ” (375 microns to 750 microns). Other thicknesses are available on request. The surface combination of Makrofol MA507 1-1 060040 is both sides gloss without masking. As with any product, use of Makrofol MA507 1-1 060040 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.

Makrofol MA507 1-1 560004 is an extrusion film based on Makrolon® polycarbonate. Makrofol MA507 1-1 560004 comprises excellent transparency, high optical quality and impact resistance. The typical application is thermoformed packaging with a blue tint for EtO, steam and gamma sterilization. Each new cycle of sterilization with high-energy radiation may result in an increased yellowing of material. Makrofol MA507 1-1 560004 is available in various standard thicknesses from 0.020 ” to 0.030 ” (500 microns to 750 microns). Other thicknesses are available on request. The surface combination of Makrofol MA507 1-1 560004 is both sides gloss without masking. As with any product, use of Makrofol MA507 1-1 560004 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.

Makrofol® SR906 1-1 040009 is a clear transparent extruded polycarbonate film with an acrylic functional layer. The film comprises a high UV protection additive. The acrylic on the top surface offers improving scratch resistance while the polycarbonate back surface provides excellent printabililty. The combination of the acrylic functional layer and the polycarbonate layer of Makrofol® SR906 040009 overcomes the low impact resistance of PMMA films. The UV protection benefits a low change in the yellowness index even if passing the weathering test. Additionally, Makrofol® SR906 1-1 040009 film has good heat resistance and excellent impact strength. Makrofol® SR906 1-1 040009 is especially designed for the Film Insert Moulding (FIM) process. Excellent formability by High Pressure Forming (HPF) as well as thermal forming processes are possible. Due to the acrylic functional layer Makrofol® SR906 040009 can be used as well for injection overmolding with Acrylic or backmolding with Polycarbonat giving high film/resin adhesion even passing typical climate test conditions for automotive interior parts. Makrofol® SR906 1-1 040009 has been designed for applications in the automotive interior, IT and EE sector. It is available in the standard thickness range of 175, 250, 375 and 635 µm. Surface structure is gloss-gloss. Makrofol® SR906 040009 is supplied with the protective masking film on both sides.

Makrofol® ST352 1-1 is a high optical quality film based on polycarbonate from Covestro with a deep black visual appearance. It comprises a high light transmission in the near-infrared and a well-defined low light transmission in the visible range. It is a co-extruded film with a functional layer for improved UV protection. The surface combination is both sides glossy (1-1). The film is available as Makrofol® ST352 1-1 940003 (375 microns) and as Makrofol® ST352 1-1 940004 (500 microns). Other thicknesses on request. Makrofol® ST352 1-1 is supplied with protective film on both sides. Typical applications are various sensor applications like LIDAR. The film might be further processed e.g. by cutting, thermoforming, film insert molding, printing and coating steps.

Makrofol® UV244 1-1 000000 is a coextruded film based on Makrolon® with a specially developed functional layer for UV-protection. It combines the well known advantages of Makrofol® with respect to mechanical, thermal and optical properties with the capability for applications under UV-exposure. The surface combination commonly available is gloss/gloss (1-1) with various standard thicknesses of 175, 250 and 375 microns. Other thickness are upon request. Typical applications are instrument panels and touch panels in the automotive sector.

Makrofol® UV328 1-2 740007 is a grey coloured coextruded film based on Makrolon® polycarbonate from Covestro and has especially been developed for exterior applications with exposure to extrem weather conditions. Due to the special formulation and the coex structure Makrofol® UV328 1-2 740007 combines the well known advantages of Makrofol® such as mechanical, thermal and optical properties with an outstanding UV restistance. The surface structure is gloss - very fine matte (1-2). Standard thickness is 650 microns. Other thicknesses and surface structures are available on request.

MVR (300°C/1.2 kg) 6.0 cm³/10 min; 15 % glass fiber reinforced; UL 94V-0/3.0 mm; high viscosity; easy release; injection molding - melt temperature 310 - 330°C; extrusion; available in opaque colors only; housings for power tools

Formerly Makrolon KU1-1205; MVR (300 °C/1.2 kg) 6.0 cm³/10 min; flame retardant; high viscosity; extrusion; solid sheet; aircraft construction; automotive construction; railway construction

MVR (300°C/1.2 kg) 7.0 cm³/10 min; food contact quality; medium viscosity; impact modified; injection molding - melt temperature 280 - 320°C; available in light colors only

MVR (300°C/1.2 kg) 34 cm³/10 min; impact modified; low viscosity; easy release; injection molding - melt temperature 280 - 320°C

MVR (300°C/1.2 kg) 6.0 cm³/10 min; Extrusion; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; high viscosity; UV stabilized; optimized for low plate-out; available in transparent, translucent and opaque colors; solid sheet

MVR (300°C/1.2 kg) 8.0 cm³/10 min; impact modified; medium viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in opaque colors only

MVR (300°C/1.2 kg) 11 cm³/10 min; impact modified; medium viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in opaque colors only

MVR (300°C/1.2 kg) 34 cm³/10 min; general purpose; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors Partially bio-circular grade / Attributed via mass balance (according to ISCC PLUS Standard).

MVR (300°C/1.2 kg) 34 cm³/10 min; general purpose; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 35 cm³/10 min; general purpose; low viscosity; UV stabilized; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 34 cm³/10 min; food contact quality; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 34 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121°C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent and opaque colors

MVR (300°C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 19 cm³/10 min; improved impact strength; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in light colors only

MVR (300°C/1.2 kg) 19 cm³/10 min; improved impact strength; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in dark colors only

MVR (300°C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300 °C/1.2 kg) 19 cm³/10 min; light diffusion grade; low viscosity; UV stabilized; easy release; available in translucent colors only

MVR (300°C/1.2 kg) 19 cm³/10 min; improved impact strength; low viscosity; UV stabilized; easy release; injection molding - melt temperature 280 - 320°C; available in light colors only

MVR (300 °C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; UV stabilized; easy release; injection molding - melt temperature 280 - 320 °C; available in transparent, translucent and opaque colors Partially bio-circular grade / Attributed via mass balance (according to ISCC PLUS Standard).

MVR (300°C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; UV stabilized; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 19 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121°C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; injection molding - melt temperature 280 - 320°C; available in color code 000000 only

MVR (300°C/1.2 kg) 19 cm³/10 min; food contact quality; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 19 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121°C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent and opaque colors Partially bio-circular grade / Attributed via mass balance (according to ISCC PLUS Standard).

MVR (300°C/1.2 kg) 19 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121°C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent and opaque colors

MVR (300°C/1.2 kg) 19 cm³/10 min; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; low viscosity; UV stabilized; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 14 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121°C; biocompatible according to many ISO 10993-1 test requirements; medium viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent and opaque colors

MVR (300°C/1.2 kg) 12 cm³/10 min; general purpose; medium viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 12 cm³/10 min; general purpose; medium viscosity; UV stabilized; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 12 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121°C; biocompatible according to many ISO 10993-1 test requirements; medium viscosity; injection molding - melt temperature 280 - 320°C; available in color code 000000 only

MVR (300°C/1.2 kg) 12 cm³/10 min; food contact quality; medium viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent, translucent and opaque colors

MVR (300°C/1.2 kg) 12 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121°C; biocompatible according to many ISO 10993-1 test requirements; medium viscosity; easy release; injection molding - melt temperature 280 - 320°C; available in transparent and opaque colors