Polyphenylene sulfide, PPS, is a thermoplastic film that has excellent chemical resistance and good electrical and physical properties.

Arolux™ PPS Polyphenylene Sulfide is a high performance, semi-crystalline thermoplastic that is inherently flame retardant and offers resistance to organic solvents and a wide range of acids even at elevated temperatures. Arolux™ PPS is a good choice for bearing and wear applications, and with a continuous use temperature over 420?, is well-suited for structural applications that operate at elevated temperatures.

40% glass fiber reinforced PPS, good for water contact applications Formerly known as EnTor 340GF

AUROtron® PPS HGF40 black is a high performance regranulate and 40% glass fiber reinforced injection molding grade with excellent heat and chemical resistance. Contains sorted post-industrial plastic parts and sprues. Typical Applications: metal substitution applications, pump rotors, high performace housings

High strength PPS injection moulding grade , 20% carbon fibers, good electrical conductivity

High strength and dimensionally stable 30% carbon fibres reinforced injection moulding grade

PPS-CF40, High strength and dimension stable 40% carbon fibres reinforced injection moulding grade

65% glass fibres reinforced and mineral filled injection moulding grade

30% glasfibres filled tribological injection moulding grade; Low friction and wear at high high service temperature

PPS-(GF30+SD15), 30% glassfibres reinforced tribological PPS grade with PTFE for injection moulding; Low friction and wear at high max. service temperature

PPS - (GF30+SD15), 30% glasfibres and PTFE filled tribological injection moulding grade; Low friction and wear at high maximum service temperature

PPS-GF30, 30% glass fibres reinforced injection moulding grade

PPS-GF40, 40% glass fibres reinforced injection moulding grade

PPS (polyphenylene sulfide) continuous fiber (uni-directional) reinforced thermoplastic composite tape, 60% carbon fiber by weight. Celstran® CFR-TP PPS CF60-01 is a 60% carbon fiber by weight PPS (polyphenylene sulfide) continuous fiber (uni-directional) reinforced thermoplastic composite tape. This material exhibits a high strength-to-weight ratio, excellent chemical and flame, smoke, and toxicity or (FST) performance, and long-term heat stability. It is well suited for aerospace, oil/gas, sporting goods and industrial applications where demanding weight, chemical and FST performance is necessary. Alternate tape widths and thicknesses may be available.

Polyphenylene Sulfide continuous fiber (uni-directional) reinforced thermoplastic composite tape, 60% E-Glass fiber by weight. Celstran® CFR-TP PPS GF60-01 is a 60% E-glass by weight PPS (polyphenylene sulfide) continuous fiber (uni-directional ) reinforced thermoplastic composite tape. This material exhibits a high strength-to-weight ratio, excellent chemical and flame, smoke, and toxicity or (FST) performance, and long-term heat stability. It is well suited for aerospace, oil/gas and industrial applications where demanding chemical and FST performance is necessary. The E-glass fiber offers a lower cost solution as compared to other PPS materials reinforced with S-glass. This material is available in natural and black colors. Alternate tape widths and thicknesses may be available.

Celstran PPS with 40% long carbon fiber Celstran PPS-CF 40-01 is a 40% long carbon fiber Polyphenylene Sulfide. This material imparts excellent impact and extremely high modulus properties that exceed that of short carbon fiber PPS.

40% long strand fiber glass reinforced polyphenylene sulfide. UL-V0 flame retardant. 40% long strand fiber glass reinforced polyphenylene sulfide

40% long strand fiber glass reinforced polyphenylene sulfide. UL-V0 flame retardant. 40% long strand fiber glass reinforced polyphenylene sulfide

40% long strand fiber glass reinforced polyphenylene sulfide

50% long strand glass fiber reinforced polyphenylene sulfide. UL-V0 flame retardant. 50% long strand glass fiber reinforced polyphenylene sulfide

6% long stainless steel fiber Polyphenylene Sulfide Celstran PPS-SF6-01 is a 6% long stainless fiber Polyphenylene Sulphide. This material imparts excellent static dissipative properties. Celstran stainless steel long fiber products provide much greater levels of conductivity than that of short fiber stainless materials.

It is one of our PPS Fiber product series. It owns outstanding performances of chemical resistance, thermo stability in high temperature condition, flame retardant, non-conducting, radiation resistance, etc. Therefore, it is called special functional fiber. Besides this, it is easy to card and has low thermal shrinkage rate. It is mainly used to make special functional fabric and thread. Generally it can be single or blended weaved according to different requirement to make different fabric. It can be used to make fireproof or insulating fabric, carpets which are used in special area, hanging, anti-fog material and radiation resistant material, framework of pipe, insulator, gasket and packing material, etc. Chemical Stability: Except hot concentrated sulfuric acid and nitric acid, it owns strong performance of acid and alkaline resistance. No solvent could dissolve it under 200°C

High-temperature resistance, innoxious, flame resistance, radiation resistance, solvent resistance, electrical insulation properties. The compounds of PPS-ha and PTFE possess new characteristic of non-stick and abrasion resistance. High adhesion to metal. It can be used to make coating material which can be usd as inner/outer coating of guideway, containers, metal mold, food pots, reaction kettles, storing tanks, storing cisterns, pipes and electric components.

PPS-hb is high rigidity crystalline polymer that offers high-temperature resistance, innoxious, flame resistance, radiation resistance, solvent resistance, electrical insulation, arc resistance, low water absorption, low mold shrinkage, good dimensional stability and radiation resistance. It's brittle. Therefore, it needs to be "cured" by some modifier. Owing to its high performance, it's widely used in medical, electronic/electric industry. Such as: rotproof sealed appliances, plugs, and contactors. It can be "cured" by different modifiers to make different PPS compounds.

Low Chlorine type of PPS-hb. It is specially used in E/E industry which requires the chlorine content. PPS-hb is high rigidity crystalline polymer that offers high-temperature resistance, innoxious, flame resistance, radiation resistance, solvent resistance, electrical insulation, arc resistance, low water absorption, low mold shrinkage, good dimensional stability and radiation resistance. It's brittle. Therefore, it needs to be modified by some modifier. Owing to its high performance, it's widely used in medical, electronic/electric industry. Such as: rotproof sealed appliances, plugs, and contactors. It can be modified by different modifiers to make different PPS compounds.

PPS-hc1 resin owns outstanding properties such as chemical resistance, high temperature resistance, flame resistance, non conducting, radiation resistance and good mechanical properties. It is used to produce high-tech and high performance fiber and monofilament. Fiber and monofilament made from Haton PPS can be used to make filter fabric of coal fired boiler, fabric of paper-making machine, electrolytic diaphragm, filtering material of liquid/gas, high performance part of gasket and packing material, anti-fog material, radiation resistant material.

PPS-hFR42 is filled PPS compound, which is filled with mineral based on the PPS resin. It shows high rigidity, creep resistance, high-temperature resistance, inherent flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low water absorption, easy processing, low mold shrinkage, good dimensional stability, and radiation resistance. Its colour is offwhite. Owing to its high performance and light colour, it's an excellent selection for outer decorating parts with high temperature resistance and high rigidity in electronic/electric and medical industry. Such as: outer shells of apparatus and electric appliance, connectors, high-temperature disinfectant instruments, surgical containers, shells of the electric tooth-cleaning devices and other devices used in dentistry.

PPS-hFR52 is filled PPS compound, which is filled with mineral based on the PPS resin. It shows high rigidity, creep resistance, high-temperature resistance, inherent flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low water absorption, easy processing, low mold shrinkage, good dimensional stability, and radiation resistance. Its colour is offwhite. Owing to its high performance and light colour, it's an excellent selection for outer decorating parts with high temperature resistance in electronic, electric and medical industry. Such as: outer shells of electric appliances, salvers, high-temperature disinfecting instruments, etc.

PPS-hFR61 is filled PPS compound, which is filled with mineral and glass fiber based on the PPS resin. It shows excellent electrical insulation properties, arc resistance, high-temperature resistance, inherent flame resistance, chemical resistance, high rigidity, creep resistance, low water absorption, easy processing, low mold shrinkage, good dimensional stability, and radiation resistance. Its colour is black. Owing to its high performance and comparative low price, it is widely used in electronic, electric and military field. Such as: connectors, plugs and military electric appliances.

PPS-hGR20 is glass reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS compounds includes good mechanical properties, high creep resistance, high temperature resistance, friction resistance, flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low mold shrinkage, easy processing good dimensional stability, and radiation resistance. Owing to its high performance, PPS-hGR20 is widely used in electronic appliances, such as: connectors, sockets, frequency dividers, components and shells of various apparatuses and instruments. PPS can be used to make elements where high strength, high temperature resistance, electrical insulation are all-important in aviation. It is also used for precise appliance plugs, high hardness outer shells, and high temperature resistant parts in military.

PPS-hGR30 is glass reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS determine the utility of PPS resins and their compounds, which includes good mechanical properties, high creep resistance, high temperature resistance, friction resistance, flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low mold shrinkage, good dimensional stability, and radiation resistance. Owing to its high performance, PPS-hGR30 can be used to make elements where high temperature resistance, electrical insulation are all-important in aviation; anticorrosion valves and electrical insulation parts in chemical industry; precise plugs, outer shells and high temperature resistant contactors in electronic industry; electric parts, terminal and switches in electric industry; high temperature resistant axle bearing and piston rings in mechanical industry.

Low Chlorine type of 40% GF reinforced PPS compounds. PPS-hGR40 DL(natural color) and PPS-hGR41 DL (black) is 40% glass fiber reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS compounds includes good mechanical properties, high creep resistance, high temperature resistance, friction resistance, flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low mold shrinkage, easy processing good dimensional stability, and radiation resistance. It is specially used in E/E industry which requires the chlorine content. Owing to its high performance, it is widely used in space aviation, chemical, electronic/electric, mechanical industry, automobile, railway fields etc. It can be used to make elements where high temperature resistance, electrical insulation are all important in aviation; anticorrosion valves and electrical insulating parts; precise plugs, outer shells and high temperature resistant contactors; electric parts, terminal and switch; carburetor, distributor, igniter, slide block, gears, thermocouple, piston rings with requirement of high temperature resistance and precision dimension; hot-air tube, crisping iron, hair curler, coffeepot.

PPS-hGR40 (natural color) and PPS-hGR41 (black) is glass reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS compounds includes good mechanical properties, high creep resistance, high temperature resistance, friction resistance, flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low mold shrinkage, easy processing good dimensional stability, and radiation resistance. Owing to its high performance, PPS-hGR40 is widely used in space aviation, chemical, electronic/electric, mechanical industry, automobile, railway fields etc. It can be used to make elements where high temperature resistance, electrical insulation are all important in aviation; anticorrosion valves and electrical insulating parts; precise plugs, outer shells and high temperature resistant contactors; electric parts, terminal and switch; carburetor, distributor, igniter, slide block, gears, thermocouple, piston rings with requirement of high temperature resistance and precision dimension; hot-air tube, crisping iron, hair curler, coffeepot.

PPS-hGR50 is glass reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS compounds includes good mechanical properties, high rigidity, high creep resistance, high temperature resistance, flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low water absorption, low mold shrinkage, easy processing, good dimensional stability, and radiation resistance. Owing to its high performance, PPS-hGR50 is widely used in space aviation, chemical, electronic appliances, mechanical, automobile, railway fields etc. It can be used to make elements where high temperature resistance, electrical insulation are all important in aviation; anticorrosion valves and electrical insulating parts; precise plugs, outer shells and high temperature resistant contactors; parts of engines, terminal and switch; carburetor, distributor, igniter, slide block, gears, thermocouple, piston rings with requirement of high temperature resistance and precision dimension.

PPS-hGR60 is glass reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS compounds includes good mechanical properties, high rigidity, high creep resistance, high temperature resistance, flame resistance, chemical resistance, excellent electrical insulation properties, arc resistance, low water absorption, low mold shrinkage, easy processing, good dimensional stability, and radiation resistance. Owing to its high performance, PPS-hGR60 is widely used in space aviation, chemical, electronic appliances, mechanical, automobile, railway fields etc. It can be used to make elements where high temperature resistance, electrical insulation are all-important in aviation; anticorrosion valves and electrical insulating parts; precise plugs; parts of engines, terminal etc.