An MDI-based, low-emissions urethane (PU) foam system designed for automotive flexible foam applications.

MDI flexible urethane (PU) bio-foam system with bio-based content designed for interior foam applications

MDI-based urethane (PU) rigid foam system for Honeycomb Sandwich Composite Applications

Semi-Rigid Low VOC Instrument Panel Urethane (PU) Foam System

Low density I-skin urethane (PU) foam system (natural color) HFC 245fa-blown, two-component microcellular polyurethane foam system designed for molding of miscellaneous Integral Skin articles that require good skin at relatively low molded densities. Depending on the application requirements and the processing conditions this system can provide - Exceptional skin formation when casted in metal tools at low mold temperatures - Wide range of molded densities from 10 to 25 pcf - Hardness range from 10 to 70 Shore A - Wide processing window on both low-pressure and high-pressure equipment

Mechanial Air Assist Spray applied urethane (PU) Elastomer system used on the outer surface of automotive interior trim applications.

ELASTOTITE G 30019T® Hot Melt Urethane (PU) Reactive Adhesive Elastotite G 30019T® Hot Melt is a one-component polyurethane reactive hot melt adhesive. The PU adhesive cures by reacting with ambient moisture to form a strong thermoset polymer. It is designed to give aggressive tack, long open time, and high green strength. It offers clean roll coating without stringing. It is designed for the lamination of various composite components comprising of wood, various plastics and metals. Application: This adhesive needs to be applied with equipment that will melt and dispense adhesive from 5 gallon pails and 55 gallon drums. Follow your equipment manufacturer procedures for start-up, shut-down and cleanup. If you need to shut down operations for an extended period of time, purge the system with a cleaning solution to prevent adhesive from curing in equipment. Partially used pails or drums can be purged with a dry inert gas and resealed between uses. This adhesive can applied to a substrate using a roll coater or other dispensing equipment such as a heated gun. Recommended Uses: Recommended for use as a replacement for mechanical fasteners in lamination processes for assembling the bodies of: - Truck/Horse Trailers - Trucks - Buses - Boats - RV - Emergency vehicles - Manufactured Homes - Metal Buildings