A Silicone adhesive/sealant compound for sealing, caulking, bonding, and making gaskets. Intended Use: - Weather-proofing electrical components, caulking plumbing fixtures, sealing glass, and making form-in-place gaskets. Features: - Flexible from -60°F to 450°F (white & clear) - Moisture curing - Flexible from -60°F to 500°F/ 600°F intermittent (Red) - Resistant to weather and chemicals

High durometer, medium tear resistance, silicone mold-making rubber for prototyping, architectural and furniture component applications Features & Benefits: - Outstanding release properties - Cures at room temperature within 16 hours or heat curable - If required, the product cure can be heat accelerated - High hardness - Medium tear resistance - Very low shrinkage and good dimensional stability - Can be used for high-temperature casting applications - High inhibition resistance - Formulated to work with both rigid and foam polyurethanes Applications: - SILASTIC™ RTV-4136-M Liquid Silicone Rubber is suited for the reproduction of prototyping, architectural and furniture components, especially for use with polyurethanes and other casting plastics.

Translucent, high-strength silicone mold-making rubber Features & Benefits: - Outstanding release properties - If required, the product cure can be heat accelerated - Translucent appearance allows split lines to be cut accurately in block molds - Very low shrinkage and good dimensional stability - High hardness, but flexible and very tough - Can be used for high temperature casting applications - Two SILASTIC™ Curing Agents: SILASTIC™ RTV-4234-T4 Curing Agent (standard) and SILASTIC™ RTV-4234-T4 O Curing Agent (oil bleeding) - Easy to de-air Applications: - SILASTIC™ RTV-4234-T4 Liquid Silicone Rubber (LSR) is a high strength mold-making rubber developed for prototype design and production tooling, especially for rapid prototyping.

High strength silicone moldmaking rubber Features & Benefits: - Outstanding release properties - High flowability and long working time - Very low hardness - Medium tear resistance - High elasticity, for easy removal of complex replica parts - Can be made thixotropic (non-flowable) for vertical surface replication Applications: - SILASTIC™ RTV-3487 Mould-Making Base is suited for the detailed reproduction of figures, art objects and similar items.

High strength silicone pad printing rubber Features & Benefits: - Fast thick section cure at room temperature - If required the product cure can be heat accelerated - Medium hardness - High tear resistance - Very low shrinkage and good dimensional stability Applications: - SILASTIC™ RTV-4131-P1 Liquid Silicone Rubber is suited for producing silicone print pads. It can be colored with pigments and softened by adding fluid (see below).

High strength silicone moldmaking rubber Features & Benefits: - Outstanding release properties - If required the product cure can be heat accelerated - Medium hardness - High inhibition resistance - High tear resistance - Very high elasticity, for easy removal of complex replica parts - Very low shrinkage and good dimensional stability - Can be used for high temperature casting applications - Can be made thixotropic (non-flowable) for vertical surface replication - Fast RTV cure, very fast cure with even, low heat - Very low viscosity for easy mixing and de-airing - Fast, RTV cure - Low durometer hardness Applications: - SILASTIC™ RTV-4250-S Kit Green is a high strength for detailed reproduction of surfaces and objects for prototype design and production tooling, as well as artistic and renovation applications. Its low durometer also makes it ideal for pad print applications.

High strength silicone moldmaking rubber Features & Benefits: - Outstanding release properties, high mold life for casting of polyurethane (both foam and rigid) - Very low shrinkage and good dimensional stability - Very high tear resistance - High elasticity, for easy removal of complex replica parts - Medium mixed viscosity and medium hardness - If required the product cure can be heat accelerated - Can be made thixotropic (non-flowable) for vertical surface replication Applications: - SILASTIC™ RTV-4260-V Kit is suited for use in architectural, prototyping and furniture applications where dimensional tolerance and flexibility are critical.

This data represents typical values that have been calculated from all products classified as: Generic Silicone Rubber, RTV-1 This information is provided for comparative purposes only.

Techsil silicone elastomer 1382 is a ready to use, one component adhesive/sealant product that is suitable for a wide variety of bonding and sealing applications. Techsil 1382 cures by absorbing moisture from the atmosphere to form a tough flexible elastomer. The cure by-product of Techsil 1382 is classified as neutral and non-corrosive to metal surfaces, however there may be a slight discolouration at the surface when cured on or close to copper. Techsil 382 offers excellent adhesion to a wide variety of substrates, particularly plastics, without the use of a primer. For applications that require a primer, Techsil 1382 works particularly well with AP 134.

Techsil 1387 series silicone elastomers are one component, self-levelling, room temperature curing products. This series of products are designed for use on electronic assemblies or any other applications that require primerless adhesion and non-corrosive cure by-products. Techsil 1387 series feature excellent flow and self-levelling characteristics and are available in Black, White and Translucent. Typical applications include but are not restricted to electronic conformal coatings, form-in-place gaskets and general bonding of metal and/or plastic components.

TECHSIL IS803 is a ready to use, one part room temperature vulcanising (RTV) elastomer, which cures on exposure to moist air to give a permanently elastic rubber. TECHSIL IS803 has excellent temperature resistance in its cured state. It is recommended for industrial applications where a high modulus sealant with good adhesive properties is required. Key Features - Good Electrical Insulation. - Resistance to ageing, weathering, ozone and corona. - Resistance to oxidation and many oils, chemicals and solvents. - Excellent bonding to a wide range of substrates. - Flexibility from -60°C to +300°C.

Techsil IS808 is a ready-to-use adhesive sealant paste that cures on exposure to air to a resilient silicone elastomer. Its combination of ease of application, excellent adhesion, durability, versatility and good electrical properties has established Techsil IS808 for applications in every type of industry. Key Features - Good Electrical Insulation - Resistance to ageing, weathering, ozone and corona. - Resistance to oxidation and many oils, chemicals and solvents. - Excellent bonding to a wide range of substrates - Flexibility from -60°C to +225°C - UL recognised file number E334038

TECHSIL RTV10533 one-component, ready-to-use, adhesive/sealant is a flowable consistency product specially developed for applications where high strength is required. On exposure to atmospheric moisture at room temperature this product cures to a very tough, durable, resilient silicone rubber. TECHSIL RTV10533 utilizes an acetoxy cure system, releasing small amounts of acetic acid vapours from the sealant during cure. Key Performance Properties: - One-component, no mixing, easy-to-use - Flowable - Room temperature condensation cure - Very high strength - High and low temperature resistance (-60°C to +200°C) - Excellent adhesion to silicone rubbers Applications: - Bonding silicone HCR gaskets together - Seam sealer - Bonding silicone coated fabric.

1084G is a non-corrosive, 1-part, room temperature vulcanising (RTV) silicone rubber. It is one of a new family of products called acetone cure sealants that are solvent free. It exhibits excellent primerless adhesion to many substrates. The product is cured rapidly in contact with atmospheric moisture to a tough rubber. It does not corrode copper or its alloys and exhibits excellent primerless adhesion when fully cured. Key Features: - Excellent thermal conductivity - Non corrosive - Fast skinning - Low linear shrinkage