Acculam® Siliglas G7 - Laminate sheet comprised of a high performance silicone resin and a woven fiberglass substrate. It qualifies to NEMA G-7 and MIL-I-24768/17. This material has high heat resistance, low dissipation factor, and excellent arc resistance. It is flame resistant with low smoke evolution, and meets the needs of Class "H" insulation. It is used in high frequency telecom equipment, transformers and items subjected to high heat.

Addisil 6100 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures. Addisil 6100 is a black, thixotropic paste, which can be applied to vertical or overhead surfaces. Key Features and Benefits - One component product - no mixing required Room temperature storage - Fast cure at elevated temperature (in a range of 140 °C to 230 °C) - Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminium,ceramic) No formation of cure by-products - Non-corrosive to metals - Good performance over a wide temperature range - Service temperature -50 °C to 250 °C

Addisil 6101, Momentive Performance Material's Silicone adhesive, is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures. Addisil 6101 silicone adhesive is a black, thixotropic paste, which can be applied to vertical or overhead surfaces. Key Features and Benefits - One component product - no mixing required Room temperature storage - Very fast cure at elevated temperature (in a range of 110°C to 230°C) - Primerless adhesion to many types of substrates (e.g. aluminum, copper, stainless steel, glass, enamel, ceramic) - No formation of cure by-products; low linear shrinkage Non-corrosive to metals and sensitive substrates Outstanding performance over a wide temperature range Service temperature -50°C to 250°C

Addisil 6300 silicone coating is a one-component heat curable silicone coating, which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures. Addisil 6300 is a white, flowable material, which can be applied on a textile by knife over roll. Compliance with FDA regulations Key Features and Typical Benefits - One component product - no mixing required Room temperature storage - Fast cure at elevated temperature (in a range of 140 °C to 230 °C) Primerless adhesion to many types of substrates - No formation of cure by-products Non-corrosive to metals - Good performance over a wide temperature range

Addisil 8101 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures. Addisil 8101 is a grey thixotropic material Key Features and Benefits - One component product - no mixing required - Room temperature storage - Very fast cure at elevated temperature (in a range of 110°C to 230°C) - Primerless adhesion to many types of substrates (e.g. PBT, PA, phenolic resins, copper, nickel, aluminum, stainless steal, brass, ceramic and glass) - No formation of cure by-products; low linear shrinkage - Non-corrosive to metals and sensitive substrates - Excellent dielectric properties - Outstanding performance over a wide temperature range - Service temperature -50°C to 250°C

905 Two-part Addition Type Potting Silicone Rubber FEATURES - No shrinkage and exotherm during cure - Wide temperature range ( -50 to +200 Deg C ) - Good insulation - Water and moisture-proof, noncorrosive - UL94-V0( File No.: E257078 ) APPLICATIONS - Applied for potting protection of general electronic components, power module and printed circuit board, it's waterproof and high voltage resistance - Used for the encapsulation of auto electric parts and all kinds of electric products

9225 Two-part Addition Type Potting Silicone Rubber FEATURES - No shrinkage and exotherm during cure - Wide temperature range ( -50 to +200 Deg C ) - Good insulation - Water and moisture-proof, noncorrosive - UL94-V0( File No.: E257078 ) APPLICATIONS - Applied for potting protection of general electronic components, power module and printed circuit board, it's waterproof and high voltage resistance - Used for the encapsulation of auto electric parts and all kinds of electric products, such as EV electrical control and converter part.

9225 Two-part Addition Type Potting Silicone Rubber FEATURES - No shrinkage and exotherm during cure - Wide temperature range ( -50 to +200 Deg C ) - Good insulation - Water and moisture-proof, noncorrosive - UL94-V0( File No.: E257078 ) APPLICATIONS - Applied for potting protection of general electronic components, power module and printed circuit board, it's waterproof and high voltage resistance. - Used for the encapsulation of auto electric parts and all kinds of electric products, such as EV electrical control and converter part.

One-part RTV Thermally Conductively Silicone Adhesive FEATURES - Neutral, single component - Vulcanize into high performance elastomer - Room temperature vulcanizing - Good electrical performance, ageing resistance - Insulation, no smell and no pollution - Good thermal conductivity - High and low temperature resistance - Flame retardant: underwriters laboratories UL94 V-0 APPLICATIONS This product is mainly applied to bond the heatsink to the heat source, such as power electronic device/MOSFET and integrated circuit board.

One-part RTV Silicone Adhesive FEATURES - Neutral, single component - Vulcanize into high performance elastomer - Room temperature vulcanizing - Good electrical performance, ageing resistance - Insulation, no smell and no pollution - Good bonding ability - High and low temperature resistance - Flame retardant: underwriters laboratories UL94 V-0 APPLICATIONS Applied to the insulating, bonding and sealing of all kinds of power supply like AC, DC, and also used for the fixing and bonding of PCB sensitive components, capacitor and triode.

One-part RTV Silicone Adhesive FEATURES - Neutral, single component - Vulcanize into high performance elastomer - Room temperature vulcanizing - Good electrical performance, ageing resistance - Insulation, no smell and no pollution - Good bonding ability - High and low temperature resistance - Flame retardant: underwriters laboratories UL94 V-0 APPLICATIONS Designed for applications which demand a strong but flexible bond, such as glass to plastics or metal or glass. Unprimed adhesion to commonly used materials including aluminum,ceramics and glass. Used as a Formed-in-place gasket(FIPG) materials.

FEATURES - Thermal conductivity: 2.0 W/m-K - Flame rating: UL94-V 0 - Low viscosity, easy to use - Room temperature cure and heat cure APPLICATIONS - Electrical vehicle battery pack, EMS and power supply - LED lights - Heat elements - High power module - Motor control

FEATURES - Thermal conductivity: 3.0 W/m-K - Flame rating: UL94-V 0 - Good thermal conductive capacity - Electrical isolating - Good mechanical and physical performance APPLICATIONS - Telecommunications hardware - LED lighting - Multiple heat-generating components to a common heat sink - Electromotor controller - Mass storage module

TC-5005 A/B is a room temperature curing silicone elastomer intended primarily for making silicone skins, but is also used as a general purpose rubber. This product is a condensation cured system using a tin catalyst that provides a 40-60 minute work time with 16-24 hour demold time. If a softer product is required, our SC-5002 can be added to this or any other silicones to increase their elongation and reduce their hardness. - RoHS/REACH SVHC Compliant - Low viscosity and easily poured - Perfect for skin simulation - Translucent in color - High elongation

TC-5015 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. When used to make molds, the TC-5015 A/B is translucent enough to see-through when casting into the mold cavity. This aids in developing void free surfaces on the casting. TC-5015 A/B is also commonly used to make ink stamp pads as well as other types of pressure pads.

TC-5024 A/B is a two-component, room temperature curing silicone elastomer. This system is designed primarily for making molds, but is also used for gaskets as well as a wide variety of parts. This product is a condensation cured system using a tin catalyst that provides a 30-minute work time with a 4-6 hour demold time. - Excellent physical properties with high tear resistance - Fast demolds - Provides excellent detail reproduction - Cures against various clays including "Roma"

TC-5030 A/B is a room temperature, additional/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various other types of parts. You can see through molds made from this material when casting into it.

TC-5040 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various other types of parts. When this rubber is used to make certain types of molds, it is translucent enough to see through when casting into the mold cavity.

TC-5041 A/B is a high tear strength, addition/platinum, room temperature curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is also used to make molds for casting low melting metals. With the use of talc powder as an interface the TC-5041 A/B has been used with cast metal temperatures running 650°F (344°C). With the ability to withstand high temperatures the TC-5041 A/B works very well as a mask for metal spraying and welding operations.

TC-5045 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is an excellent mold material for casting rigid and flexible urethane systems. It may also be used as a mold making material for casting low melting metals in continuous operations to 650°F (344°C) and sporadic applications of 850°F (454°C). TC-5045 A/B has proven to be less inhibited in its cure than standard platinum based silicones. It has a very favorable CTE for heat expandable mandrels used in composite tooling.

TC-5050 A/B is a room temperature, addition/platinum curing silicone rubber designed for mold making, encapsulation applications, pressure pads, gaskets, and various types of parts. It is also used to make molds for casting low melting metals into. With the use of talc powder as an interface the TC-5050 A/B has been used in production with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5050 A/B works very well as a mask for metal spraying and welding operations.

TC-5060 A/B is a room temperature, addition/platinum curing silicone rubber designed for: - Mold making - Encapsulation applications - Pressure pads - Gaskets - Casting low-melt metals into - Various types of parts With the use of talc powder as an interface the TC-5060 has been used with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5060 works very well as a mask for metal spraying and welding operations.

TC-5061 A/B is a room temperature, addition/platinum curing silicone rubber designed for: - Mold making - Encapsulation applications - Pressure pads - Gaskets - Casting low-melt metals into - Various types of parts With the use of talc powder as an interface the TC-5061 has been used with cast metal temperatures running 650°F (344°C) and has been subject to temperatures up to 850°F (454°C) for making a limited number of casts. With the ability to withstand high temperatures the TC-5061 works very well as a mask for metal spraying and welding operations.

TC-5100 A/B is a room temperature, addition/platinum curing silicone rubber designed for making flexible parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. This system is easily pigmented with silicone pigments. This product has been successfully tested for skin safety and cytotoxicity by an independent lab (results are available upon request). If a softer product is required, our SC-5002 can be added to this or any other silicones to increase their elongation and reduce their hardness. - High Tear Strength - Medical Simulations - Translucent/Easily Pigmented - Props for Movie Special FX - Tested for Skin Safety - Tested for Cytotoxicity

TC-5110 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5110 A/B is translucent enough to see through when casting into the mold cavity. For making parts, this system is easily pigmented with silicone pigments. This product has been successfully tested for skin safety and cytotoxicity by an independent lab (results are available upon request). If a softer product is required, our SC-5002 can be added to this or any other silicones to increase their elongation and reduce their hardness. - High Tear Strength - Medical Simulations - Translucent/Easily Pigmented - Props for Movie Special FX - Cures at ambient temperatures - Tested for Skin Safety - Flexible Molds - Tested for Cytotoxicity

TC-5130 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5130 A/B is translucent enough to see through when casting into the mold cavity. For making parts, this system is easily pigmented with BJB’s 8100 Series Silicone Pigments. - High Tear Strength - Medical Simulations - Translucent/Easily Pigmented - Props for Movie Special FX - Low Viscosity - Flexible Molds

TC-5140 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5140 A/B is translucent enough to see through when casting into the mold cavity. For making parts, this system is easily pigmented with BJB’s 8100 Series Silicone Pigments. - High Tear Strength - Fast Cure - Translucent/Easily Pigmented - Gaskets and Parts - Low Viscosity - Flexible Molds

TC-5150 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5150 A/B is translucent enough to see through when casting into the mold cavity. For making parts, this system is easily pigmented with BJB’s 8100 Series Silicone Pigments. - High Tear Strength - Fast Cure - Translucent/Easily Pigmented - Gaskets and Parts - Low Viscosity - Flexible Molds

Bluesil™ EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion. Applications: - Mold release agent for technical rubber, tires, plastics & foundry products - Water repellent and release agent for industrial glassware - Additive in maintenance products: floor and furniture polishes, products for leather maintenance - Tack modifier for adhesives - Slip additive for curable release coatings - Antifoam in pesticide formulations (for growing crops only)

Bluesil™ TCS 7515 A/B is a two-component heat curing liquid silicone elastomer that cross-links by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. Applications: Technical textile coatings, such as coated airbags, industrial and high performance fabrics. Features: - High bond strength without primer on textiles from different origins. - Allows very low coat weights (< 30 g/m²). - Provides high tear strength and high comb stripping resistance to the coated fabric. - Low thermal conductivity (high insulation properties). - Long bath life at room temperature (> 16 h). - Fast cure at elevated temperature. - Solventless technology. - Low viscosity and easily pump able to sustain high coating speed.

Bluesil™ TCS 7537 A/B is a two-component polyaddition heat cured liquid silicone elastomer. All products from the Textile Coating System (TCS) product line are specially engineered for textile coating applications. Advantages: - Airbag Coatings - Industrial Fabrics and Substrates - Commercial Protective Coatings Features: - High bond strength without primer on Polyamide, Polyester, Aramids, and Glass fibers - Excellent adhesion over time on difficult substrates, such as unscoured textiles - Provides high tear strength and edge comb resistance to the coated fabric - Suitable for Laminating and Transfer Coatings - Fast Cure at Elevated Temperatures - Solventless Technology - Durable Protective Coating

Bluesil™ TCS 7537 A/B is a two-component polyaddition heat cured liquid silicone elastomer. All products from the Textile Coating System (TCS) product line are specially engineered for textile coating applications. Advantages: - Airbag Coatings - Industrial Fabrics and Substrates - Commercial Protective Coatings Features: - High bond strength without primer on Polyamide, Polyester, Aramids, and Glass fibers - Excellent adhesion over time on difficult substrates, such as unscoured textiles - Provides high tear strength and edge comb resistance to the coated fabric - Suitable for Laminating and Transfer Coatings - Fast Cure at Elevated Temperatures - Solventless Technology - Durable Protective Coating

Body Double™ is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate! Body Double™ is skin safe and certified by an independent laboratory. One Casting or Many . . . For About The Same Price: unlike alginates, which are good for one only casting, Body Double™ will last for many castings of almost any material including plaster, Matrix™ Neo™, wax, resins (Smooth-Cast urethanes, polyester, etc.), lowtemperature melt metal alloys, etc. The amount of Body Double™ used per mold is less than most alginates, so the cost per mold is about the same. Adding HYPER-FOLIC™ release additive to Body Double™ silicone will create a self-releasing silicone which is easily removed from hair-covered body areas.. Body Double® "Standard Set" for larger surface areas. Working time of 5 minutes and a demold time of 30 minutes*. Body Double® "Fast Set" for fast turnaround. Working time of 90 seconds and a demold time of 7 minutes*. *Depending on material temperature, ambient temperature and body temperature - see "Preparation" below for details.

Body Double™ SILK is a self-releasing platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce excellent detail from any original model. Cured material is skin safe and certified by an independent laboratory to ISO 10993-10, Biological evaluation of medical devices, Part 10: Tests for irritation and skin sensitization. Body Double™ SILK will release from closely cropped hair-covered skin surfaces (short beards, moustaches, eye-brows, pubic hair, etc.). Release cream or Hyperfolic are not needed when using Body Double™ SILK. Body Double™ SILK will last for many castings of almost any material including plaster, Matrix™ Neo™, wax, resins (Smooth-Cast urethanes, polyester, etc.) Body Double™ SILK has a working time of 6 minutes and a demold time of 20 minutes*. *Depending on material temperature, ambient temperature and body temperature - see "Preparation" below for details.

Body Double™ is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate! Body Double™ is skin safe and certified by an independent laboratory. One Casting or Many . . . For About The Same Price: unlike alginates, which are good for one only casting, Body Double™ will last for many castings of almost any material including plaster, Matrix™ Neo™, wax, resins (Smooth-Cast urethanes, polyester, etc.), lowtemperature melt metal alloys, etc. The amount of Body Double™ used per mold is less than most alginates, so the cost per mold is about the same. Adding HYPER-FOLIC™ release additive to Body Double™ silicone will create a self-releasing silicone which is easily removed from hair-covered body areas.. Body Double® "Standard Set" for larger surface areas. Working time of 5 minutes and a demold time of 30 minutes*. Body Double® "Fast Set" for fast turnaround. Working time of 90 seconds and a demold time of 7 minutes*. *Depending on material temperature, ambient temperature and body temperature - see "Preparation" below for details.

Silicone Rubber, RTV-2 Mold Making, Plastics and Rubber Processing Mold Making, Mold Making

Silicone Rubber, RTV-2 Mold Making, Mold Making Mold Making, Plastics and Rubber Processing

Detectaseal® is the latest advance in contamination detection and containment. This unique range of metal detectable elastomer compounds has been developed specifically to meet the stringent demands of the pharmaceutical and food processing industries. Detectaseal® fragments as small as 2-3mm can be easily identified by in-line metal detection equipment used to detect product contaminated by process lines. The Detectaseal® range includes Nitrile, EPDM, Silicone and Fluoropolymer (FKM) elastomer compounds (all FDA-compliant) available in blue and black, which allows the most appropriate material to be selected for every application. Detectaseal® compounds can be moulded into O-rings and custom components. Key Attributes - Early detection and containment of contamination: Reduced product loss, Increased productivity - Blue seals to assist in easy identification - Excellent mechanical properties and sealing efficiency - Exceptional oil and heat resistance - FDA-compliant (CFR21.177.2600 paragraphs A - F) - USP Class VI approved to Suffix 88 121°C - Free from animal-derived ingredients (ADI) Typical Applications - Static sealing applications - Food processing and bakery equipment - Pharmaceutical drug manufacturing equipment - Bioscience equipment

Addition-curing silicone rubber This product is a solid silicone rubber cured with addition of platinum as the catalyst. It can be cured at a moderate temperature of 120°C, without any off-flavor and with high thermal utilization rate. The products made from it have higher tear strength than the grade like silicone products cured with peroxide. It is divided into two series: the NE-01 series use precipitated silica, applicable to molding process and food contact silicone rubber products; the NE-09 series use fumed silica, applicable to molding and extrusion process, and can be used to manufacture food contact silicone rubber products and transparent silicone tubes.