Lucofin®1400HN is a polar copolymer with low crystallinity consisting of ethylene and n-butyl acrylate. Due to its chemical structure Lucofin®1400HN is softer and more flexible than ethylene homopolymers with comparable density. Lucofin®1400HN is supplied as non-colored granules. Lucofin®1400HN is used as component in multilayer film applications or as a polymer modifier to improve low temperature crack resistance, stress crack resistance ESCR1,weldability, and processability. Product advantages - easy processingwith standard processing equipment flexibility - high impact strength at lowtemperatures (- 40°C) - thermal stability (no corrosive by-products) - goodmechanical properties - high temperature resistance - good compatibility to other polymers and high filler acceptance - environmentally friendly Applications Lucofin®1400HN is used primarily for extrusion applications. Products are films for the construction and agricultural industries, FFS2 bags, and for food packaging applications. Moreover, Lucofin®1400HN is ideally suited as base resin for compounding or as impact modifier for stiff polymers. Compounds based on Lucofin®1400HN can be used for profile and cable extrusion purposes and for the production of sealing membranes. Furthermore, it can be used for cross-linked closed cell foams. Food Legislation This product complies with the relevant requirements of regulation 1935/2004 / EC. This product complies with the relevant requirements of Regulation 2023/2006 / EC (GMP). This product complies with the relevant requirements of the amended regulation 10/2011 / EC (PIM) (last regulation 2016/1416 / EC. Information on FDA compliance on request.

Lucofin 1400MN Powder is a polar copolymer with low crystallinity consisting of ethylene and n-butyl acrylate. Due to its chemical structure Lucofin 1400MN is softer and more flexible than ethylene homopolymers with comparable density. Lucofin 1400MN Powder is supplied as non-colored granules without any additives. Lucofin 1400MN Powder can be used for polymer modification and improve: - for compounds, the compatibility and absorptive capacity of minerals, fillers, pigments and additives - the flexibility in rotomoulding applications - the heat resistance in bitumen, without negative impact on flexibility at low temperatures Product advantages - easy processing with standard processing equipment - improved flexibility - enhanced impact strength at low temperature (-40°C) - thermal stability (no corrosive by-products) - good mechanical properties - high temperature resistant up to 300°C - good compatibility and filler acceptance - environmentally friendly Applications Lucofin 1400MN Powder is used primarily as additive in rotomoulding applications, for powder coatings and as bitumen modifier (PmB) Food Approval This product complies with the relevant requirements of regulation 1935/2004/EC. This product complies with the relevant requirements of Regulation 2023/2006/EC (GMP). This product complies with the relevant requirements of the amended regulation 10/2011/EC (PIM) (last regulation 2016/1416/EC). Information on the FDA compliance on request.

Lucofin 1400MN is a polar copolymer with low crystallinity consisting of ethylene and n-butyl acrylate. Due to its chemical structure Lucofin 1400MN is softer and more flexible and ethylene homopolymers with comparable density. Lucofin 1400MN is supplied as non-colored granules. Lucofin 1400MN is used as component in multilayer film applications or as a polymer modifier to improve low temperature crack resistance, stress crack resistance ESCR, weldability, and processability. Product advantages - easy processing on standard processing equipment - flexibility - impact strength at low temperatures (- 40 °C) - thermal stability of polymer (no corrosive by-products) - good mechanical properties - high temperature resistance - good compatibility to other polymers and high filler acceptance - environmentally friendly Applications Lucofin 1400MN is used primarily for injection molding applications but is also suited for extrusion purposes. It is suitable for film extrusion; respective products are films for the construction and agriculture industries FFS bags, and for food regulations packaging applications. Moreover, Lucofin 1400MN is ideally suited as base resin for compounding or as impact modifier for stiff polymers. Compounds based on Lucofin 1400MN can be used for profile and cable extrusion purposes and for the production of sealing membranes. Furthermore, it can be used for cross-linked closed cell foams. Food Approval This product complies with the relevant requirements of regulation 1935/2004/EC. This product complies with the relevant requirements of Regulation 2023/2006/EC (GMP). This product complies with the relevant requirements of the amended regulation 10/2011/EC (PIM) (last regulation 2016/1416/EC.) Information on FDA compliance on request.

Lucofin 1400PN is a polar copolymer with low crystallinity consisting of thylene and n-butyl acrylate. Due to its chemical structure Lucofin 1400PN is softer and more flexible than ethylene homopolymers with comparable density. Lucofin 1400PN is supplied as non-colored granules. Product properties Lucofin 1400PN is used as component in multilayer film applications or as polymer modifier to improve low temperature crack resistance, stress crack resistance ESCR1, weldability, and processability. Product advantages - easy processing on standard processing equipment - excellent wetting properties of filler with high specific surface like carbon black - flexibility - high impact strength at low temperatures (-40°C) - thermal stability (no corrosive by-products) - good mechanical properties - high end use temperature - good compatibility with other polymers and high filler acceptance - environmentally friendly Applications Lucofin 1400PN is used primarily for injection molding applications but is also suited for extrusion purposes. It can be used as carrier resin for high loaded pigment and carbon black masterbatches in order to improve the melt index in combination with excellent dispersion and can be used in extrusion coating in order to imporve hot tack properties of the final product. Lucofin 1400PN can be used in injection molding for thin wall packaging. Food Approval This product complies with the relevant requirements of regulation 1935/2004/EC. This product complies with the relevant requirements of Regulation 2023/2006/EC (GMP). This product complies with the relevant requirements of the amended regulation 10/2011/EC (PIM) (last regulation 2016/1416/EC.) Information on FDA compliance on request.

Lucofin® 1492M HG is a chemically modified polyethylene, i.e. EBA grafted with maleic anhydride (MA). Lucofin 1492M HG exhibits boosted levels of polarity due to the MAH grafting in comparison to the base EBA copolymer. Thus, it is excellently suited for applications that require increased polarity levels. Product advantages - Simplified processing when used on standard processing equipment - Improved adhesion to various materials - Good compatibilty to many additives - Good filler acceptance - environmentally friendly Applications Lucofin 1492 HG maleic anhydride modified EBA offers excellent adhesion to polar materials. It should be considered to be as is or in combination with Lucofin 1400HN or Lucofin 1400MN to - enable high filler loading in HFFR (Halogen Free Flame Retardand) compounds e.g. ATH (Aluminum trihydrate) or MDH (Magnesium dehydrate) - flexibilized and toughen (impact modification) otherwise brittle plastic materials (PA6, PA6.6, PBT, PET) including scrap/recycled materials - modify melt viscosity and therefore improve processability for e.g. PA - enable dissimilar polymer compatibility e.g. PA6/PE or PE/PS - improve bonding and strength in -- wood- plastic composit (WPC) materials -- polymer/fiber blends e/g/ glass fibers

Product description Lucolast 7010 is a polar copolymer consisting of ethylene and butyl acrylate with low crystallinity. Product properties Addition of Lucolast 7010 to bitumen increases its viscosity and broadens the range of plasticity. Although the minimum value of the Fraass breaking point of Lucolast 7010 is as low as for unmodified standard bitumen, the ring and ball softening point increases considerably, depending on the proportion of Lucolast 7010 that was added. Penetration values decline accordingly. Ductility determined according to DIN EN 12591 decreases, however, the values ascertained for the so-called ductility at low temperatures are usually more favourable than those for standard bitumen without addition of Lucolast 7010. Product advantages Compared with other standard binder Lucolast 7010 displays significant advantages in improving resistance to deformation. Rut formation tests at high temperatures demonstrated that asphalt can bear a two- to three-fold load when modifying it with thermoplastics or altering binder viscosity by adding Lucolast 7010. This does not impair the low-temperature performance of Lucolast 7010, but rather improves it. Applications Even relatively small amounts of PmB based on Lucolast 7010 in asphalt mixtures improve: - resistance to mechanical stress, in particular deformation and wear - stability / rigidity and reduce the tendency to flow when hot and under load - low temperature flexibility - ageing behaviour Examples for application: - s-wearing courses to ZTV-Asphalt - StB - poured asphalt, also on sloping surfaces (ramps) - stone mastic asphalt - special asphalt surfaces, e.g. porous asphalt - thin bituminous wearing courses (hot laying)

Lucolast® 7010AC is a polar copolymer consisting of ethylene and butyl acrylate with low crystallinity. Product properties Addition of Lucolast® 7010AC to bitumen increases the range its viscosity and broadens the range of plasticity. Depending on the proportion of Lucolast® 7010AC that was added the minimum value of the Fraass breaking point of Lucolast® 7010AC modified bitumen decreases and the ring and ball softening point increases. Penetration values decline accordingly. Ductility determined according to DIN EN 12591 decreas-es, however, the values ascertained for the so-called ductility at low temperatures are more favourable than those for standard bitumen with-out addition of Lucobit 1710AC. Product advantages Compared with other standard binder Lucolast® 7010AC displays significant advantages in improving resistance to deformation. Rut formation test at high temperatures demonstrated that asphalt can bear a two- to three-fold load when modifying it with thermoplastics or altering binder viscosity by adding Lucolast® 7010AC. This does not impair the low-temperature performance of Lucolast® 7010AC, but rather improves it. Applications Even relatively small amounts of PmB based on Lucolast® 7010AC in asphalt mixtures improve: - resistance to mechanical stress, in particular deformation and wear - stability/rigidity and reduce the tendency to flow‚ when hot and under load - low temperature flexibility - ageing behaviour Examples for application: - s-wearing courses to ZTV-Asphalt - StB - poured asphalt, also on sloping surfaces (ramps) - stone mastic asphalt - special asphalt surfaces, e.g. porous asphalt thin - bituminous wearing courses (hot laying)