PRIMACOR™ 1321 Copolymer is an ethylene acrylic acid copolymer suitable for extruded blown and cast film. PRIMACOR 1321 Copolymer has been specifically designed for use as an adhesive layer in composite films or sealant layer in flexible packaging structures. PRIMACOR 1321 Copolymer exhibits: - Good interlayer adhesion to PE and PA - Good optical properties - Excellent toughness and strength - Excellent environmental stress crack and product resistance - Good hot-tack and sealability - Insensitivity to moisture Applications: - Multilayer films - Food packaging Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 1410 Copolymer is an ethylene acrylic acid copolymer suitable for monolayer or coextrusion blown films. PRIMACOR 1410 Copolymer has been specifically designed for use as a heat seal or adhesive layer in composite films. PRIMACOR 1410 Copolymer exhibits: - Excellent hot tack and sealability - Excellent toughness and strength - Excellent crack resistance - Insensitivity to moisture - Good optical properties Applications: - Speciality and skin packaging - Multilayer films Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 1430 is an ethylene acrylic acid copolymer that provides good sealability, hot tack and excellent adhesion to polar (foil, nylon, etc.) materials. It also provides excellent toughness, clarity and tear resistance. - Adhesive layer of sealant layer in flexible packaging structures - For blown or cast film extrusion - Used where adhesion to nylon or foil is desired Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 3002 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion coating and extrusion lamination. PRIMACOR 3002 Copolymer exhibits: - Excellent Draw-down and edge stability. - Excellent organoleptic properties. - Excellent toughness and strength. - Adhesion to paper, paperboards, metals and Polyethylene - Excellent environmental stress crack and product resistance - Excellent hot-tack and sealability - Insensitivity to moisture Applications: - Food packaging - Flexible packaging laminates - Liquid packaging laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 3003 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion coating and extrusion lamination. PRIMACOR 3003 Copolymer exhibits: - Excellent draw-down and edge stability - Excellent organoleptic properties - Excellent toughness and strength - Outstanding environmental stress crack and product resistance - Excellent hot-tack and sealability - Adhesion to paper, paperboard, metals and polyethylenes - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 3004 is an ethylene acrylic acid copolymer designed for extrusion/coextrusion coating and laminating. It provides excellent hot tack and adhesion to metallic, paper and polyethylene substrates with excellent heat seal strength, even through many oil and powdered products. This resin also offers outstanding resistance to delamination, as well as excellent toughness and environmental stress crack resistance (ESCR). - Excellent draw down and edge stability - Excellent product resistance - Excellent hot tack, heat seal, toughness - High performance sealant or tie layer Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 3150 is an ethylene acrylic acid copolymer designed for extrusion/coextrusion coating and laminating resin for flexible packaging applications. It provides excellent adhesion to metallic, paper and polyethylene substrates, and offers good draw- down, heat sealability and oil and grease resistance. - For extrusion/coextrusion coating and laminating applications - Adhesion to metallic, paper and polyethylene substrates - Cost effective sealant or tie resin for foil-based structures - Moisture insensitivity Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 3330 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR 3330 Copolymer has been specifically designed for use as an adhesive resin for extrusion and coextrusion coating and extrusion lamination or sealant layer. PRIMACOR 3330 Copolymer exhibits: - Excellent adhesion to metallic, paper and PE substrates. - Excellent heat sealability and hot tack. - Excellent toughness. - Excellent oil and grease resistance. - Insensitive to moisture. Applications: - Flexible packaging laminates - Plastic tube laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 3340 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR 3340 Copolymer has been specifically designed for use as a sealant and adhesive layer in flexible packaging and liquid packaging laminates. PRIMACOR 3340 Copolymer exhibits: - Excellent adhesion to metallic, paper and PE substrates - Excellent heat sealability and hot tack - Good oil grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 3440 Copolymer resin is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR 3440 Copolymer exhibits: - Excellent heat sealability and hot tack. - Excellent adhesion to metallic, paper and PE substrates - Excellent toughness - Excellent stress crack resistance - Insensitivity to moisture - Designed specifically for high line speeds Applications: - Flexible packaging laminates - Liquid packaging laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 3460 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR 3460 Copolymer has been specifically designed for use as a sealant and adhesive layer in flexible packaging laminates and thin paper coating. PRIMACOR 3460 Copolymer exhibits: - Excellent heat sealability and hot tack. - Excellent adhesion to metallic, paper and PE substrates. - Good stress crack resistance. - Designed specifically for high line speeds and low processing temperature. - Insensitive to moisture. Applications: - Flexible packaging - Thin paper coating - Metallic substrate lamination Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

PRIMACOR™ 3540 is an extrusion coating polymer. Main Characteristics: - Extrusion coating adhesive polymer - Coextrusion coating adhesive in combination with select INSITE™ Technology based polyethylene resins - Enhanced adhesion retention - Complies with the requirements for use in contact with food of the EU-Directive 2002/72/EC. Contact a SK Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European countries and in addition gives info about imposed migration requirements. - Complies with U.S. FDA 21 CFR 177.1310(b). Consult the regulations for complete details.

PRIMACOR™ 4608 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR 4608 Copolymer has been specifically designed for use as a sealant and adhesive layer for flexible packaging and liquid packaging laminates. PRIMACOR 4608 Copolymer exhibits: - Excellent adhesion to metallic, paper, and PE substrates. - Excellent heat sealability and hot-tack. - Excellent draw down. - Good oil grease resistance. - Insensitivity to moisture. Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Consult the regulations for complete details.

- Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent grease and oil resistance, water hold-out and excellent product resistance for flexible packaging applications - Complies with: - U.S. FDA 21 CFR 177.1310(a)(2) Consult the regulations for complete details. PRIMACOR™ 5980I is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other polar substrates. In dispersion form, it can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates. Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Nonwoven binding - Metal/paper coating Outstanding Properties: - Dispersible in aqueous amines and alkali - "Clean" dispersion requires no salts, surfactants or solvents - Dispersions use existing waterbourne application equipment - High hot tack - Low odor

- Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent grease and oil resistance and excellent product resistance for flexible packaging applications Complies with - U.S. FDA 21 CFR 177.1310(a)(2) Consult the regulations for complete details. PRIMACOR™ 5986 is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other polar substrates. It can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates. Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Metal/paper coating

PRIMACOR™ 698 is a medium acid copolymer offering enhanced adhesion vs. LDPE, and thus potential for reduced processing temperatures or processing without substrate or melt pre-treatments. Main Characteristics: - Good adhesion to metallic, paper and PE Substrates - Good heat sealability and hot-tack - Excellent draw-down - Low neck-in - Complies with the requirements for use in contact with food of the EU-Directive 2002/72/EC. Contact a SK Sales office to obtain a detailed food contact compliance letter for this product. - Complies with U.S. FDA 21 CFR 177.1310(b). Consult the regulations for complete details.

Supreme™ 021, Polyolefin Plastomer (POP), is an ethylene octene copolymer produced via Nexlene™ technology. Supreme™ 021 performs well in a wide range of various food & non-food packaging films with excellent sealing property and impact strength. Typical Performance: - Excellent low seal initiation temperature and hot tack strength - Superior impact strength and transparency Compiles with: - US. FDA 21 CFR 177.1520 - EU. No 10/2011

Supreme™ 021S, Polyolefin Plastomer (POP), is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 021S performs well in a wide range of various food & non-food packaging films with excellent sealing property and impact strength. Typical Performance: - Excellent low seal initiation temperature and hot tack strength - Superior impact strength and transparency Compiles with: - US. FDA 21 CFR 177.1520 - EU. No 10/2011 Additives: - Antiblock: 4000 ppm - Slip: 1300 ppm

Supreme™ 024, Polyolefin Plastomer (POP), is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 024 performs well in a wide range of various cast film applications with excellent sealing property, cling force, and impact strength. Typical Performance: - Excellent low seal initiation temperature and hot tack strength - Excellent impact strength, transparency, and cling force Compiles with: - US. FDA 21 CFR 177.1520 - EU. No 10/2011

Supreme™ 028, Polyolefin Plastomer (POP), is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 028 performs well in a wide range of various cast film applications with excellent sealing property and impact strength. Typical Performance: - Excellent low seal initiation temperature and hot tack strength - Superior impact strength and transparency Compiles with: - US. FDA 21 CFR 177.1520 - EU. No 10/2011

Supreme™ 051, Polyolefin Plastomer (POP), is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 051 performs well in a wide range of various food & non-food packaging films with excellent sealing property and impact strength. Typical Performance: - Excellent low seal initiation temperature and hot tack strength - Superior impact strength and transparency Compiles with: - US. FDA 21 CFR 177.1520 - EU. No 10/2011

Supreme™ 871, Polyolefin Plastomer (POP) is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 871 performs well in a wide range of various packaging films with excellent sealing property, cling property, and impact strength. - Excellent low seal initiation temperature and hot tack strength - Outstanding cling property - Superior impact strength and transparency

Supreme™ 875, Polyolefin Plastomer (POP) is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 875 performs well in a wide range of various packaging films with excellent sealing property, cling property, and impact strength. - Excellent low seal initiation temperature and hot tack strength - Outstanding cling property - Superior impact strength and transparency

Supreme™ 883, Polyolefin Plastomer (POP) is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 883 performs well in a wide range of various packaging films with excellent sealing property, cling property, and impact strength. - Excellent low seal initiation temperature and hot tack strength - Outstanding cling property - Superior impact strength and transparency

Supreme™ 891, Polyolefin Plastomer (POP) is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 891 performs well in a wide range of various packaging films with excellent sealing property, cling property, and impact strength. - Excellent low seal initiation temperature and hot tack strength - Outstanding cling property - Superior impact strength and transparency

SUPRENE EPDM 501A is a low Mooney Viscosity and ENB type grade. It shows excellent mill processability. It has good flow and is suitable for molding complicated shaped products. It is also suitable for extrusion of cable. Main uses of SUPRENE EPDM 501A are found in gasket, roll, electric parts, wire & cable, various rubber coated fabrics and general industrial parts.

SUPRENE EPDM 503 is ENB type grade, which has high ethylene content and low Mooney Viscosity. It shows excellent mechanical properties even in high hardness compound. It has good flow property and is suitable for weather strip with high hardness and low compression set. Main uses of SUPRENE EPDM 503 are found in weather strip, joint, molded parts, electric parts, wire & cable, various rubber coated materials and general industrial parts.

SUPRENE EPDM 505A has lower Mooney viscosity than SUPRENE EPDM 505, and its mill processability is further improved. It is Possible to mold with SUPRENE EPDM 505A various molded products within a short time because of its fast cure rate. When SUPRENE EPDM 505A blended with diene type rubber, its dispersion is excellent. It can also be used more effectively by taking advantage of good ozone resistances. SUPRENE EPDM 505A is suitable for sponge made by continuous curing. Low density sponge can be obtained through the curing. It can also be used in various applications such as automotive tires, rubber coated fabrics, and automotive parts.

SUPRENE EPDM 512F has high ethylene content for high green strength of uncured rubber. Since SUPRENE EPDM 512F can make a formulation incorporating large quantities of fillers and process oil, the resulting compound is inexpensive. In addition, its 'friable bale' form facilitates its mixing with ingredients by means of a Banbury mixer and at shorter mixing time, which results in energy saving. For examples of application of SUPRENE EPDM 512F making the best use of its above- mentioned characteristics, there are various extrusion products, such as hose, window gasket, various molded products, and low cost compounds.

SUPRENE EPDM 5206F is a non-oil extended grade with very high Mooney viscosity and high ENB content. SUPRENE EPDM 5206F shows excellent extrusion processability and its moderate ethylene content gives this grade a better flexibility under low temperature, compared with high ethylene grades. Especially, fast curing is possible with this grade because of its high ENB content. SUPRENE EPDM 5206F is suitable for sponge made by continuous curing such as window seal, body seal for automotives and adiabatic sponge.

SUPRENE EPDM 537-2 is used by blending with IIR. SUPRENE EPDM 537-2 shows excellent heat aging properties, especially with peroxide cures. It blends easily in all formulation and gives excellent weathering and low temperature impact properties. SUPRENE EPDM 537-2 is mainly used in blends with IIR for inner tubes. It can also be used in various applications such as mechanical goods.

SUPRENE EPDM 537-3 is used by blending with IIR. SUPRENE EPDM 537-3 shows excellent heat aging properties, especially with peroxide cures. It blends easily in all formulation and gives excellent weathering and low temperature impact properties. SUPRENE EPDM 537-3 is mainly used in blends with IIR for inner tubes. It can also be used in various applications such as mechanical goods.

SUPRENE EPDM 552 has high Mooney viscosity with fast curing. SUPRENE EPDM 552 shows excellent extrusion processability and physical properties with high loading fillers. Its good green strength can give better shape retention and higher extrudability. SUPRENE EPDM 552 is mainly used in automotive exterior parts such as window seal and used in other various applications.

SUPRENE EPDM 553 is a non-oil extended grade with very high Mooney viscosity. SUPRENE EPDM 553 shows excellent extrusion processability and physical properties with high loading fillers. Its moderate ethylene content gives this grade a better flexibility under low temperature, compared with high ethylene grades. Its good green strength can give better shape retention and higher extrudability. SUPRENE EPDM 553 is mainly used in automotive exterior parts such as window seal and used in other various applications.

SUPRENE EPDM 5890F is a non-oil extended grade with very high Mooney viscosity and high ethylene content. SUPRENE EPDM 5890F is well balanced in processability and physical properties with high loading fillers. Its good green strength can give better shape retention and higher extrudability. SUPRENE EPDM 5890F is mainly used solid extrudate for automotive parts such as window seal, hose and used in other various applications.

SUPRENE EPDM 600WF is an oil-extended ‘friable bale' ENB type grade which contains 100phr of non-staining paraffinic oil. SUPRENE EPDM 600WF is possible to load it with high concentration of fillers etc. When blended with a non-oil extended SUPRENE EPDM grade, the SUPRENE EPDM 600WF improves the properties and processability (at mixing and extruding) of the non-oil extended grade. It can be formulated to make products of lower hardness. Its blend with diene-type rubber gives excellent physical properties. SUPRENE EPDM 600WF is mainly used in automotive parts such as window seal, hose, and various industrial parts.

SUPRENE EPDM 7486F is a non oil extended grade with very high Mooney viscosity and extra high ENB content. SUPRENE EPDM 7486F shows excellent extrusion processability due to its tailored molecular architecture and its moderate ethylene content gives a better flexibility under low temperature condition, compared with high ethylene grades. Especially, controlled cellular structure with dimensional stability can be realized with fast curing performance with this high ENB grade. SUPRENE EPDM 7486F is suitable for sponge application made by continuous vulcanization such as window seal, body seal for automotive and adiabatic sponge.

SUPRENE EPDM 6090WF is an oil-extended ‘friable bale' ENB type grade which contains 50phr of non-staining paraffinic oil. SUPRENE EPDM 6090WF is possible to load it with high concentration of fillers etc. When blended with a non-oil extended SUPRENE EPDM grade, the SUPRENE EPDM 6090WF improves the properties and processability (at mixing and extruding) of the non-oil extended grade. It can be formulated to make products of lower hardness. Its blend with diene-type rubber gives excellent physical properties. SUPRENE EPDM 6090WF is mainly used in automotive parts such as window seal, hose, and various industrial parts.