Fluoropolímero (fluoropolímero): ETFE
Producto | Disponibilidad | Descripción del producto |
---|---|---|
3M™ Dyneon™ Fluoroplastic ET 6210AZ | Europa |
3M™ Dyneon™ Fluoroplastic Agglomerate ET 6210AZ is a melt processable fluoroplastic consisting mainly of alternating tetrafluoroethylene and ethylene monomer units (ETFE). This partially crystalline fluorothermoplastic offers a valuable combination of properties. This agglomerate form can also be used for compounding.
Features and Benefits
- Wide service temperature range -200° to +150°C
- Low flammability
- Excellent electrical and mechanical properties
- Very good resistance to solvents and chemicals
- High resistance to outdoor weathering
- High light transmission in the visible and UV ranges
- Non-stick characteristics
- Excellent tear resistance
- Low permeability
- Good resistance to radiation
|
AGC F-CLEAN® | Norteamérica | |
DynaMix™ PD5501 | Europa |
ETFE Resin
Features:
- Excellent Chemical Resistance
- Good Dimensional Stability
- Excellent Processability
Applications:
- Aviation
- Industrial
- Wire & Cable
- Sporting Goods
|
DynaMix™ PD5501-TB | Europa |
ETFE Resin
Features:
- Excellent Chemical Resistance
- Good Dimensional Stability
- Excellent Processability
Applications:
- Aviation
- Industrial
- Wire & Cable
- Sporting Goods
|
ESD 3281 | África y Oriente Medio |
Carbon Fiber - Static Dissipative
|
ESD 3282 | África y Oriente Medio |
Carbon Fiber - Electrically Conductive
|
ESD 3283 | África y Oriente Medio |
Carbon Fiber - Electrically Conductive
|
ESD 3284 | África y Oriente Medio |
Carbon Fiber - Electrically Conductive
|
ESD 3285 (ISO) | África y Oriente Medio |
Carbon Fiber - Electrically Conductive
|
Exac ETFE | Norteamérica | |
Fluon® ETFE Film | Norteamérica | |
Fluon® ETFE | Norteamérica |
Fluon®ETFE is a thermoplastic fluoropolymer developed by Asahi Glass. It is a copolymer comprising of tetrafluoroethylene (C2F4) and ethylene (C2H4). Fluon®ETFE is a balanced fluoropolymer that has chemical resistance and electrical propertiescomparable to typical fluoropolymers, such as PTFE, PFA and FEP and performs better than ECTFE or PVdF with its improved mechanical strength and very easy mouldability.
Applications:
- Electrical cables
- Tubes
- Casing
- Filament
- Moulded parts
- Films
|
Fluon® LM-ETFE 720AP | Norteamérica |
Fluon®LM-ETFE is a new fluororesin which combines the excellent heat resistant and mechanical properties of ETFE resin and the low melting point.
Features:
- The melting point is 30-40 °C lower than that of conventional ETFE resin.
- Film with excellent transparency can be produced.
- Easier processing thanks to a wide window of possible processing.
|
Fluon® LM-ETFE 730AP | Norteamérica |
Fluon®LM-ETFE is a new fluororesin which combines the excellent heat resistant and mechanical properties of ETFE resin and the low melting point.
Features:
- The melting point is 30-40 °C lower than that of conventional ETFE resin.
- Film with excellent transparency can be produced.
- Easier processing thanks to a wide window of possible processing.
|
Fluon® LM-ETFE 740AP | Norteamérica |
Fluon®LM-ETFE is a new fluororesin which combines the excellent heat resistant and mechanical properties of ETFE resin and the low melting point.
Features:
- The melting point is 30-40 °C lower than that of conventional ETFE resin.
- Film with excellent transparency can be produced.
- Easier processing thanks to a wide window of possible processing.
|
Fluon® LM-ETFE AH-2000 | Norteamérica |
Fluon® LM-ETFE AH series is a fluoro resin with adhesive properties, and is possible to adhere to other materials by melting. It can be applied directly without adhesive agent or surface treatment used in previous systems. Excellent adhesiveness of the two-layer system is effected in only one step. Conventional properties such as anti stick, ETFE mouldability and chemical resistance are the same as those of conventional ETFE.
|
Fluon® LM-ETFE AH-3000 | Norteamérica |
Fluon® LM-ETFE AH series is a fluoro resin with adhesive properties, and is possible to adhere to other materials by melting. It can be applied directly without adhesive agent or surface treatment used in previous systems. Excellent adhesiveness of the two-layer system is effected in only one step. Conventional properties such as anti stick, ETFE mouldability and chemical resistance are the same as those of conventional ETFE.
|
Generic ETFE - Carbon Fiber | África y Oriente Medio |
This data represents typical values that have been calculated from all products classified as: Generic ETFE - Carbon Fiber
This information is provided for comparative purposes only.
|
Generic ETFE | África y Oriente Medio |
This data represents typical values that have been calculated from all products classified as: Generic ETFE
This information is provided for comparative purposes only.
|
InStruc® ETFECF15 | África y Oriente Medio |
15% CARBON FIBER REINFORCED ETFE
|
InStruc® ETFECF20 | África y Oriente Medio |
20% CARBON FIBER REINFORCED ETFE
|
InStruc® ETFECF20HF | África y Oriente Medio |
20% CARBON FIBER REINFORCED, HIGH FLOW ETFE
|
InStruc® ETFEGB20 BK001 | África y Oriente Medio |
20% GLASS BEAD FILLED, BLACK ETFE
|
InStruc® ETFEGF25 | África y Oriente Medio |
25% GLASS FIBER REINFORCED ETFE
|
InStruc® ETFEGF40 | África y Oriente Medio |
InStruc ETFEGF40 is a 40% glass fiber reinforced Ethylene Tetrafluoroethylene.
|
LNP™ LUBRICOMP™ Compound 2FL24 | África y Oriente Medio |
LNP LUBRICOMP 2FL24 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% glass fiber and 10% PTFE. Added features of this grade include: Wear Resistant.
|
LNP™ THERMOCOMP™ Compound 2C003 | África y Oriente Medio |
LNP THERMOCOMP 2C003 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 15% carbon fiber. Added features of this grade include: Electrically Conductive.
|
LNP™ THERMOCOMP™ Compound 2C004 | África y Oriente Medio |
LNP THERMOCOMP 2C004 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive.
|
LNP™ THERMOCOMP™ Compound 2F004 | África y Oriente Medio |
LNP THERMOCOMP 2F004 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% glass fiber.
|
LNP™ THERMOCOMP™ Compound 2F005 | África y Oriente Medio |
LNP THERMOCOMP 2F005 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 25% glass fiber.
|
LNP™ THERMOCOMP™ Compound 2X04505 | África y Oriente Medio |
LNP THERMOCOMP 2X04505 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive.
|
LNP™ THERMOCOMP™ Compound 2X95787 - Americas | Latinoamérica |
LNP THERMOCOMP 2X95787 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 15% glass fiber.
|
LNP™ THERMOCOMP™ Compound 2X95787 - Asia | Asia-Pacífico |
LNP THERMOCOMP 2X95787 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 15% glass fiber.
|
LNP™ THERMOCOMP™ Compound 2X98703 | África y Oriente Medio |
LNP THERMOCOMP 2X98703 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive.
|
LNP™ THERMOCOMP™ Compound 2Z004 | África y Oriente Medio |
LNP THERMOCOMP 2Z004 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% milled glass.
|
Mecoline IS RDX 5245 F | África y Oriente Medio |
This compound is made to meet stringent specifications such as the MIL-W-22759 (SAE AS22759), VG 95218 Part 20, 21, 22 and 23, but also other specifications throughout the industry. Applications include commercial wiring in avionics, satellites, aircraft, helicopter, ships, trains, offshore platforms and high performance military and motorsport electronics.
|
Mecoline IS RDX 5246 F | África y Oriente Medio |
Commercial wiring in avionics, satellites, aircraft, helicopter, ships, trains, offshore platforms and high performance military and motorsport electronics.
|
NEOFLON™ ETFE EP-521 | África y Oriente Medio |
NEOFLON ETFE EP-521 is a fluoropolymer with good mechanical properties and relatively low specific gravity.
Introduction
- NEOFLON ETFE EP-521 is a copolymer of tetrafluoroethylene and ethylene, which is chemically stable and electrically unique. It's also well designed low specific gravity.
- Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer).
- Good melt flowability. It is suitable for both extrusion and injection molding.
- It is widely used such as for wire and cable (aerospace, automotive and appliance), film, electrical parts and semiconductor containers.
|
NEOFLON™ ETFE EP-541 | África y Oriente Medio |
NEOFLON ETFE EP-541 is a low-specific-gravity fluoropolymer with stronger mechanical properties.
Introduction
- NEOFLON ETFE EP-541 is a copolymer of tetrafluoroethylene and ethylene, which is chemically stable and electrically unique. It's also well designed low specific gravity.
- Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer).
- It is suitable for both extrusion and injection molding.
- It is used for wire and cable (aerospace, automotive and appliance), film, electrical parts and semiconductor containers which require crack resistance.
|
NEOFLON™ ETFE EP-610 | África y Oriente Medio |
NEOFLON ETFE EP-610 is a fluoropolymer with good flexibility and processability.
Introduction
- NEOFLON ETFE EP-610 is a copolymer of tetrafluoroethylene and ethylene, which is chemically stable and electrically unique. It's also well-designed flexible.
- Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer).
- Low melting point. It can be processed with wide temperature range of extrusion and injection molding.
- It is widely used for wire and cable (aerospace, automotive and appliance), film, electrical parts and semiconductor containers.
|