Poliamida (nylon) by UNITIKA Plastics Division
| Producto | Disponibilidad | Descripción del producto |
|---|---|---|
| UNITIKA Nylon 6 A1015LP-20 | Asia-Pacífico |
Type : Powder
Identification mark : PA6
|
| UNITIKA Nylon 6 A1022GFL | Asia-Pacífico |
Type : 30% Glass fiber-reinforced, high flowability
Identification mark : PA6-GF30
|
| UNITIKA Nylon 6 A1022GFL60 | Asia-Pacífico |
60% Glass fiber-reinforced, high flowability, high-rigidity
|
| UNITIKA Nylon 6 A1025GOS | Asia-Pacífico |
Type : 30% Glass fiber-reinforced,flame retardant(UL94 V-0, Halogen)
Identification mark : PA6-GF30FR(17)
|
| UNITIKA Nylon 6 A1025NO | Asia-Pacífico |
Nonreinforced, flame retardant(UL94 V-0, Halogen)
|
| UNITIKA Nylon 6 A1025SR | Asia-Pacífico |
Type : High flowability
Identification mark : PA6
|
| UNITIKA Nylon 6 A1030FR | Asia-Pacífico |
High impact strength
|
| UNITIKA Nylon 6 A1030GFL | Asia-Pacífico |
30% Glass fiber-reinforced
|
| UNITIKA Nylon 6 A1030GFL15 | Asia-Pacífico |
Type : 15% Glass fiber-reinforced
Identification mark : PA6-GF15
|
| UNITIKA Nylon 6 A1030GFL45 | Asia-Pacífico |
45% Glass fiber-reinforced
|
| UNITIKA Nylon 6 A1030GFLTF | Asia-Pacífico |
Type : 30% Grass fiber-reinforced,fluoroplastic-added
Identification mark : PA6+PTFE-GF30
|
| UNITIKA Nylon 6 A1030JR | Asia-Pacífico |
Microcrystalline type
|
| UNITIKA Nylon 6 A1030M | Asia-Pacífico |
Type : Molybdenum disulfide-added
Identification mark : PA6
|
| UNITIKA Nylon 6 A1030R | Asia-Pacífico |
Type : Microcrystal type, deep-molding, good printability
Identification mark : PA6
|
| UNITIKA Nylon 6 A1030SR | Asia-Pacífico |
High toughness
|
| UNITIKA Nylon 6 A1030TF | Asia-Pacífico |
Fluoroplastic-added
|
| UNITIKA Nylon 6 A3030N-3 | Asia-Pacífico |
Type : 30% Mineral filler-reinforced, flame retardant(UL94 V-2, Halogen free)
Identification mark : PA6-MD30FR(30)
|
| UNITIKA Nylon 6 A3130 | Asia-Pacífico |
35% Mineral filler-reinforced
|
| UNITIKA Nylon 6 A3130HR-25 | Asia-Pacífico |
25% Mineral filler-reinforced
|
| UNITIKA Nylon 6 AN1020 | Asia-Pacífico |
Type :Nonreinforced,flame retardant (UL94 V-0,approved Halogen free)
Identification mark : PA6-FR(30)
|
| UNITIKA Nylon 6 EX-1020K | Asia-Pacífico |
Type : Low volume resistivity
Identification mark : PA6-CD
|
| UNITIKA Nylon 6 EX-1030 | Asia-Pacífico |
Type : high viscosity,ultra-high impact strength, low-temperature resistance
Identification mark : PA6-I
|
| UNITIKA Nylon 6 EX-1222 | Asia-Pacífico |
Type : High impact strength, low-temperature resistance
Identification mark : PA6-I
|
| UNITIKA Nylon 6 EX-6240 | Asia-Pacífico |
Type : Ultra-high impact strength, low-temperature resistance
Identification mark : PA6-I
|
| UNITIKA Nylon 6 EX-9215G30 | Asia-Pacífico |
Type : 30% Glass fiber-reinforced, high impact strength
Identification mark : PA6-I-GF30
|
| UNITIKA Nylon 6 FR-RUNG30 | Asia-Pacífico |
Type : Good appearance,high flowability,flame retardant (UL94 V-0,approved Halogen free)
Identification mark : PA6-GF30FR(40)
|
| UNITIKA Nylon 6 M1030B | Asia-Pacífico |
Type : High strength, high rigidity, low density
Identification mark : PA6
|
| UNITIKA Nylon 6 M1030DH | Asia-Pacífico |
Type : High strength, high rigidity, low density
Identification mark : PA6
|
| UNITIKA Nylon 6 M1030E | Asia-Pacífico |
Type : High strength, high rigidity, low density
Identification mark : PA6
|
| UNITIKA Nylon 6 N1020G20 | Asia-Pacífico |
Type : Thermal conductive grade,Electro-conductive type
Identification mark : PA6 + GF + MD
|
| UNITIKA Nylon 6 N2002G | Asia-Pacífico |
Type : Thermal conductive grade,Insulation type
Identification mark : PA6 + GF + MD
|
| UNITIKA Nylon 6 RUN35 | Asia-Pacífico |
Type : Ultra-high rigidity, warping resistance, good appearance
Identification mark : PA6-(GF+MD)
|
| UNITIKA Nylon 6 RUN35-C25 | Asia-Pacífico |
Type : High rigidity, warping resistance, good appearance,weathering resistance(Black limited)
Identification mark : PA6-(GF+MD)
|
| UNITIKA Nylon 6 RUN35-TA | Asia-Pacífico |
Type : Ultra-high rigidity, warping resistance, good appearance,coloring,light fastness
Identification mark : PA6-(GF+MD)
|
| UNITIKA Nylon 6 RUN50 | Asia-Pacífico |
Type : Ultra-high rigidity, warping resistance, good appearance
Identification mark : PA6-(GF+MD)
|
| UNITIKA Nylon 66 A125AF | Asia-Pacífico |
Type : Fluoroplastic-added
Identification mark : PA66+PTFE
|
| UNITIKA Nylon 66 A125GF | Asia-Pacífico |
Type : 30% Milled glass fiber-reinforced
Identification mark : PA66-GX30
|
| UNITIKA Nylon 66 A125GF15 | Asia-Pacífico |
Type : 15% Milled glass fiber-reinforced
Identification mark : PA66-GX15
|
| UNITIKA Nylon 66 B2040G20 | Asia-Pacífico |
Type : 20% Glass fiber-reinforced, good appearance
Identification mark : PA66-GF20
|
| UNITIKA Nylon 66 B2040G33 | Asia-Pacífico |
33% Glass fiber-reinforced, good appearance
|
