Polipropileno (PP): PP, copolímero al azar
Producto | Disponibilidad | Descripción del producto |
---|---|---|
Aceso® PPM R020 S01 | Europa |
Polypropylene Aceso® PPM R020 S01 is random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developped for the extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants.
Polypropylene Aceso® PPM R020 S01 is the version of the Polypropylene Aceso® PPM R020 based on a phthalate-free catalyst.
|
Aceso® PPM R020 | Europa |
Polypropylene Aceso® PPM R020 is random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developped for the extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants.
|
Aceso® PPM R021 S01 | Europa |
Polypropylene Aceso® PPM R021 S01 is random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developed for the extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants. This grade can also be injection moulded.
Polypropylene Aceso® PPM R021 S01 is the version of the Polypropylene Aceso® PPM R021 based on a phthalate-free catalyst.
|
Aceso® PPM R021 | Europa |
Polypropylene Aceso® PPM R021 is random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developed for the extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants. This grade can also be injection moulded.
|
Advance™ 150 PLUS | África y Oriente Medio |
Advance™ 150 PLUS Polypropylene Resin is a clarified random copolymer designed for the blow moulding of high gloss bottles and film & sheet extrusion. Containers produced from Advance 150 PLUS exhibit good surface finish and excellent contact clarity.
Typical Applications
- Personal care containers
- High clarity bottles
- Thermoforming
- Film for retort applications
|
Advance™ 400 | África y Oriente Medio |
Advance™ 400 Polypropylene Resin is a random co-polymer developed for thin wall injection moulding applications. It is a controlled rheology grade characterized by excellent optical properties, improved yellowness index and a good balance of stiffness and impact strength at ambient temperatures.
Advance™ 400 Polypropylene Resin contains an antistatic additive.
Typical Applications
- Thin wall packaging
- Food containers
- Cosmetic containers
- Aerosol dust covers
|
ALCOM® PP 620/3 BS73 | Asia-Pacífico |
Base Polymer
Polypropylene Random Copolymer
Filler/Additive System
barium sulphate
Special Features
high density, high acoustic damping, increased X-Ray contrast
Market Segment
Furniture, packaging, Personal care
Typical Applications
fixing elements, housings
|
ALCOM® PP 620/9 MRX80 | Asia-Pacífico |
Base Polymer
Polypropylene Random Copolymer
Filler/Additive System
special filler
Special Features
high density
Market Segment
Furniture, building and construction, sport and leisure
Application Area
injection moulded parts
Typical Applications
fixing elements
|
Analene® Q-570 | Asia-Pacífico |
Analene Q-570 melt is a nucleated random copolymer for injection molding applications. This grade is designed to be processed in conventional injection molding equipment and offers high transparency, good stiffness/impact strength balance, high gloss, good flow and low smell. Q-570 is a ‘Phthalate-Free' product. Analene Q-570 complies with FDA regulation in 21 CFR 177.1520 and 21 CFR 178.2010.
Application: Food containers, stationery, disposable syringe, CD/DVD case. High transparency TWIM parts.
|
Analene® Q-571 | Asia-Pacífico |
QTM Analene® Q-571 is a Polypropylene Random Copolymer. High fluidity, High Clarity, Anti-static, Good resistance to chemical. This product meets US FDA 21 CFR 177.1520(c) 3.1a. Bio-compatible ISO 10993-5 grade for medical devices and pharmaceutical applications.
|
Analene® Q-590 | Asia-Pacífico |
Analene® Q-590 is a random copolymer polypropylene for injection molding applications and is suitable for ETO sterilization. It has high impact strength, excellent transparency and flow properties suitable for large thin wall products. Analene® Q-590 complies with FDA regulation in 21 CFR 177.1520 and 21 CFR 178.2010. Biocompatible ISO 10993-5 grade for medical devices and pharmaceutical applications.
Application
Injection molding with thin wall geometry, home appliances, transparent totes
Characteristics
Excellent transparency, good impact strength, high flow and excellent organoleptic properties.
|
Arak PP EP2X83CE | África y Oriente Medio |
EP2X83CE is a clear polypropylene random copolymer particularly suited for blow moulding technology & single or multi-layer sheet extrusion .The product imparts excellent clarity & gloss and these characteristics may be further enhanced through orientation process (i.e. injection stretch blow moulding).Due to these properties EP2X83CE is an interesting alternative to P.V.C. for use in blow moulding ,sheet extrusion & thermoforming applications.
Blow moulding applications for EP2X83CE include bottle for detergents & toiletries, flat mineral water, fresh fruit juice & concentrates, jars for condiments & preserves. Extruded sheets made of EP2X83CE are widely used in stationary folders & thermoforming articles such as trays for fresh pasta, sweets or biscuits, fruit & vegetable containers & pots for dairy products.
* EP2X83CE is suitable for food contact.
|
Arak PP EP2X83CI | África y Oriente Medio |
EP2X83CI is a polypropylene random copolymer with excellent flow properties .The product features very high transparency & gloss. EP2X83CI is mainly designed for transparent house wares & quality packaging applications. EP2X83CI is an outstanding grade for injection moulded containers & thin-walled packaging where clarity is of utmost importance.
Typical injection moulding applications include food storage containers, household articles, food packaging, cosmetics & pharmaceutical products, lids, caps & closures .In many of these applications, EP2X83CI can replace PS since it can match optical properties whilst adding low weight, low odour transfer, chemical resistance & impact strength. Another major application of EP2X83CI is the co-extrusion with other polypropylene resins to produce multilayer sheet for thermoforming trays for fresh pasta & bakery products.
* EP2X83CI is suitable for food contact.
|
AuroraTec™ PP10001 | África y Oriente Medio |
High Flow Random Copolymer for thin wall parts
Formerly known as DualPoly PP10001
|
AXLENE® 12RM | Latinoamérica |
AXLENE12RM is a clarified random copolymer that is designed for screw-injection moolding.
The base resin in this product meets the requirements of the US Food and Drug Administration (FDA) contained in the Code of Federal Regulations in 21 CFR 177.1520.
Features:
- Good clarity
- Good process stability
- Good dimensional stability
Typical Applications:
- General injection
- Housewares
- Containers
|
AXLENE® 20RM | Latinoamérica |
AXLENE20RM is a clarified random copolymer that is designed for screw-injection molding.
The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520.
Features:
- Good clarity
- Good processing stability
- Good dimensional stability
Typical Applications:
- Containers
- Houseware
|
AXLENE® 2RM | Latinoamérica |
AXLENE2RM is a clarified random copolymer that is designed for injection and extrusion blow molding.
The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520.
Features:
- Good clarity
- Good processing stability
- Good dimensional stability
Typical Applications:
- Injection and extrusión blow molding
- Thermoformed containers
- Multylayer sheets
|
AXLENE® 35RM | Latinoamérica |
AXLENE35RM is a clarified random copolymer that is designed for screw-injection molding.
The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520.
Features:
- Good clarity
- Good processing stability
- Good dimensional stability
Typical Applications:
- Containers
- Houseware
- Thin-wall injection molding
|
Bapolene® 5021CM | África y Oriente Medio |
This resin is a clarified random copolymer polypropylene for applications requiring impact strength. It is clarified and complies with US FDA 21 CFR 177.1520.
|
Bapolene® 5063C | África y Oriente Medio |
This resin is a clarified PP Random Copolymer for injection molding. This resin exhibits excellent clarity and low temperature impact properties. This product meets US FDA 21 CFR 177.1520.
|
Bapolene® 5063CM | África y Oriente Medio |
This resin is a clarified PP Random Copolymer for injection molding. This resin exhibits excellent clarity and low temperature impact properties. This product meets US FDA 21 CFR 177.1520.
|
Bapolene® 5083C | África y Oriente Medio |
This resin is a clarified PP Random Copolymer for injection molding. This resin exhibits good processing and impact properties. This product meets US FDA 21 CFR 177.1520.
|
Bapolene® 5095CA | África y Oriente Medio |
This resin is a clarified PP Random Copolymer for injection molding. This resin exhibits fact-cycle injection and impact properties and contains antistat. This product meets US FDA 21 CFR 177.1520.
|
Beta (ß)-PPR™ RA7050 | África y Oriente Medio |
Beta-PPR™ RA7050 is a PP-RCT(1), a Polypropylene-Random-Copolymer with an enhanced Crystalline structure brought about by a special ß-nucleation and with an improved Temperature resistance. Proof of the excellent performance characteristics of Beta-PPR™ RA7050 is, for example, a categorised required strength (CRS) of 5 MPa at 70°C and 50 years in comparison to a value of 3.21 MPa for standard PP-R.
The colour of Beta-PPR™ RA7050 is steel grey similar to RAL 7042.
In general Beta-PPR™ RA7050 is intended to be used in applications for plumbing and heating, such as in-house hot and cold water pipes and fitiings, floor and wall heating systems and radiator connections.
|
BFI 256 | Norteamérica | |
Borclear™ RC737MO | África y Oriente Medio |
Borclear RC737MO is a random copolymer .
It is designed for blow moulding products with outstanding transparency, clarity and high gloss. This grade also provides high heat distortion temperature, very good impact and good organoleptic properties at improved processability.
CAS-No. 9010-79-1
Applications
- Cosmetics
- Food packaging
- Household applications
- Containers for fine chemicals
Special features
- Excellent transparency
- Improved gloss
- Excellent clarity
- Good impact behaviour
|
Borealis PP RA130E | África y Oriente Medio |
RA130E is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is natural coloured.
Applications
RA130E is recommended for the production of PP-R pipes and fittings used in
- Heating
- Plumbing
- Domestic water
- Relining
- Industrial applications
The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes.
Specifications
RA130E is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented.
- DIN 8078
- DIN 8077
- EN ISO 15874
Special features
RA130E is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure:
- Enhanced processability
- Economical pipe production
- Excellent product consistency
- High temperature resistance
- Low influence on taste & odour
- Good impact strength
The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation.
|
Borealis PP RA130E-6017 | África y Oriente Medio |
RA130E-6017 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green coloured.
Applications
RA130E-6017 is recommended for the production of PP-R pipes and fittings used in
- Domestic water
- Heating
- Relining
- Plumbing
- Industrial applications
The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes.
Specifications
RA130E-6017 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented.
- DIN 8078
- DIN 8077
- EN ISO 15874
Special features
RA130E-6017 is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure:
- Enhanced processability
- Economical pipe production
- Excellent product consistency
- High temperature resistance
- Low influence on taste & odour
- Good impact strength
The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation.
|
Borealis PP RA130E-8427 (industrial) | África y Oriente Medio |
RA130E-8427 (industrial) is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is grey coloured.
|
Borealis PP RA130E-8427 | África y Oriente Medio |
RA130E-8427 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is grey coloured.
Applications
RA130E-8427 is recommended for the production of PP-R pipes and fittings used in
- Heating
- Plumbing
- Domestic water
- Relining
- Industrial applications
The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes.
Specifications
RA130E-8427 is intended to fulfill following standards and regulations, in case of appropriate industrial
manufacturing standard procedures applied and a continuous quality system is implemented.
- DIN 8078
- DIN 8077
- EN ISO 15874
Special features
RA130E-8427 is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure:
- Enhanced processability
- Economical pipe production
- Excellent product consistency
- High temperature resistance
- Low influence on taste & odour
- Good impact strength
The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation.
|
Borealis PP RA7050-GN | África y Oriente Medio |
PP-RCT (PolyPropylene-Random Crystallinity Temperature) is a material classification defined in ISO 1043-1:2001 to describe the second-generation class of PP-R materials. This pipe class, PP-RCT, has recently been included in EN ISO 15874, the global standard for plastics piping systems for Hot and Cold Water pipe installations and enable increased performance and competitiveness for pipe producers.
RA7050-GN is a PP-RCT polypropylene-random-copolymer with a special crystallinity brought about by a special beta-nucleation which exhibits an improved pressure resistance, especially at elevated temperatures. PP-RCT materials such as RA7050-GN are designed to fulfil the PP-RCT pipe class as described in the EN ISO 15874 standard, e.g. 50 years service life at 70°C at 5 MPa, compared to 3.2 MPa for standard PP-R materials when tested according to the ISO 9080 pipe pressure tests.
RA7050-GN is ready compounded for maximum quality control. The colour of RA7050-GN is green similar to RAL 6024.
Applications
In general RA7050-GN is intended to be used in applications for plumbing and heating, such as in-house hot and cold water pipes and fittings, floor and wall heating systems and radiator connections.
|
Borealis PP RB206MO | África y Oriente Medio |
RB206MO is a random copolymer with good transparency and contact clarity, very good gloss and surface finish
The high stiffness of this grade allows for a reduction in cycle time. This grade also features high heat distortion temperature.
Applications
- Monolayer and multilayer bottles in the food or cosmetic
- industry (hot filling)
- Cosmetics
Special features
- High stiffness
- Improved gloss and excellent transparency
- Good contact clarity
- Optimal surface
|
Borealis PP RB307MO | África y Oriente Medio |
RB307MO is a random copolymer with good transparency and contact clarity, very good gloss and surface finish
This grade also features high heat distortion temperature.
Applications
- Household and chemical containers such as detergents, cleaners, motor oils
- Industrial chemicals
- Cosmetics
Special features
- Improved gloss and excellent transparency
- Good contact clarity
- Optimal surface
|
Borealis PP RB707CF | África y Oriente Medio |
RB707CF is a random copolymer
Applications
RB707CF is recommended for:
- Transparant packaging film
- Sealing layer in coextrusion
- Textile packaging film
- Food packaging
- Lamination films
- Label film
- Technical and protection film
Additives
RB707CF does not contain slip or antiblock additives.
Special features
RB707CF is optimised to deliver:
- High gloss
- Low haze
- Heat sterilisable
- High stiffness
- Good sealing performance
|
Borealis PP RD204CF | África y Oriente Medio |
RD204CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No.: 9010-79-1
Applications
RD204CF is recommended for:
- Food packaging
- Stationary films
- Lamination films
- Flower packaging
Textile packaging film
|
Borealis PP RD208CF | África y Oriente Medio |
RD208CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
Applications
RD208CF is recommended for:
- Food packaging
- Lamination films
- Textile packaging film
- Stationary films
- Flower packaging
|
Borealis PP RD234CF | África y Oriente Medio |
RD234CF is a random copolymer.
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
RD234CF contains antiblock and slip agents.
|
Borealis PP RD364CF | África y Oriente Medio |
RD364CF - is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No.: 9010-79-1
Applications
RD364CF is recommended for:
- Food packaging
- Textile packaging film
- High quality stationery film
- Flower packaging
- Lamination films
Additives
RD364CF is a slip, antiblock and antistatic formulated resin.
Additives Content
Antiblock (SiO2) 1800 ppm Borealis Method
Slip 1500 ppm Borealis Method
Calcium stearate Yes
Antistatic agent Yes Borealis Method
|
Borealis PP RD366CF | África y Oriente Medio |
RD366CF - is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No.: 9010-79-1
Applications
RD366CF is recommended for:
- Food packaging
- Textile packaging film
- Stationary films
- Flower packaging
- Lamination films
Additives
RD366CF is a slip, antiblock and antistatic formulated resin.
Additives Content
Antiblock (SiO2) 1800 ppm Borealis Method
Slip 1500 ppm Borealis Method
Antistatic agent Yes Borealis Method
Calcium stearate Yes Borealis Method
|
Borealis PP RD461CF | África y Oriente Medio |
RD461CF is a random copolymer.
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
RD461CF contains antistatic additives contains antiblock and slip agents.
|