Polipropileno (PP): Borealis PP
Producto | Disponibilidad | Descripción del producto |
---|---|---|
Borealis PP HA507MO | África y Oriente Medio | |
Borealis PP HB306MO | África y Oriente Medio |
HB306MO is a low melt-flow-rate polypropylene homopolymer intended for compression moulding of caps and closures. This grade is designed for the caps and closures market and therefore contains a lubricant for an optimum opening torque of the cap. This grade combines a good balance of stiffness and impact strength with good processability and melt stability. Additives provide anti-static protection.
Applications
- Closures
- Special features
- Good stiffness
- Good impact strength
- Good processability
- Good melt stability
|
Borealis PP HB600TF | África y Oriente Medio |
HB600TF is a low melt flow rate polypropylene homopolymer intended for extrusion and thermoforming .
Its very good organoleptic properties allows this grade to be used with any masterbatch without discoloring problems.
CAS-No.: 9003-07-0
Applications
HB600TF is recommended for:
- In line and off line thermoforming
- Mixing with copolymer
- House ware and thin wall packaging
- Textile film yarns
- Margarine tubs
- Woven fabrics, ropes and twines
Special Features
HB600TF is optimised to deliver:
- Very good processability
- Good contact clarity
- Very good melt stability
- stiffness and impact balance
|
Borealis PP HB601WG | África y Oriente Medio |
HB601WG is a polypropylene homopolymer intended for injection moulding and blow moulding. The product is available in natural but other colours can be provided on request.
This material has excellent balanced mechanical properties and is easy to process.
Applications
HB601WG has been developed especially for applications like:
- Household applications
- Dishwashers components
- Washing machine parts
Special Features
- High heat stabilised
- UL registered under File E108112
- Detergent resistant
|
Borealis PP HC101BF | África y Oriente Medio |
HC101BF is a polypropylene homopolymer.
HC101BF contains no slip, antiblock, antistatic additives or nucleating additives
|
Borealis PP HC110BF | África y Oriente Medio |
HC110BF is a polypropylene homopolymer intended for injection moulding and extrusion.
|
Borealis PP HC205TF | África y Oriente Medio |
HC205TF is a special nucleated polypropylene homopolymer intended for thermoforming packaging.
Its increased crystallisation temperature allows reduced cycle time and increased output Products originating from this grade have excellent transparency, good organoleptic properties, good balance of stiffness and impact strength at ambient temperatures.
Applications
HC205TF is recommended for:
- In line and off line thermoforming
- High transparent trays, cups and containers
- Housewares and thin wall packaging
- Margarine tubs and dairy containers
- Blending with copolymers for lids
Special features
HC205TF is optimised to deliver:
- Excellent processability
- Reduced cycle time and increased output
- Broad application window
- Consistent shrinkage behaviour after forming
- Excellent clarity
- Very good stiffness and impact balance
- High gloss
- Excellent transparency
- Excellent organoleptic properties
|
Borealis PP HC600TF | África y Oriente Medio |
HC600TF is a polypropylene homopolymer intended for thermoformed packaging applications.
The product is also suitable for the production of monofilaments,tapes, slit and split film
HC600TF is recommended for:
- In line and off line thermoforming
- Housewares and thin wall packaging
- Margarine tubs and dairy containers
- Mixing with copolymer
- Carpet backing
- Geotextiles
- Sacking tapes
- Stretch tape
- Textile film yarns
- Woven fabrics, ropes and twines
HC600TF is optimised to deliver:
- Very good contact clarity
- Very good stiffness and impact balance
- Very good processability
- Very good melt stability
|
Borealis PP HD204CF | África y Oriente Medio |
HD204CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process.
|
Borealis PP HD214CF | África y Oriente Medio |
HD214CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process.
HD214CF contains antiblock but no slip agent
|
Borealis PP HD234CF | África y Oriente Medio |
HD234CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process.
HD234CF contains antiblock and slip agents.
|
Borealis PP HD244CF | África y Oriente Medio |
HD244CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process.
HD244CF contains slip additive and antioxidant.
|
Borealis PP HD601CF | África y Oriente Medio |
HD601CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process.
Applications
HD601CF is recommended for
- Textile packaging film
- Food packaging
- Lamination films
- Stationary films
- Flower packaging
Special features
HD601CF is optimised to deliver:
- Easy processability
- Good mechanical properties
- Heat sterilisable
- High stiffness
- Good optical properties
|
Borealis PP HD905CF-02 | África y Oriente Medio |
HD905CF-02 is a polypropylene homopolymer
HD905CF-02 is a nucleated, high crystalline film resin. This grade is suitable for the manufacturing of unoriented films on chill roll processes. Optical properties will not deteriorate as with conventional homo- or copolymers at elevated temperatures.
CAS-No.: 9003-07-0
Applications
HD905CF-02 is recommended for:
- Twist film
- Textile packaging film
- Label film
- Hot fill
- Lamination films
Special Features
HD905CF-02 is optimised to deliver:
- Very high stiffness
- Excellent planarity
- Excellent temperature resistance
- Very good optical properties
|
Borealis PP HE125MO | África y Oriente Medio |
HE125MO is a polypropylene homopolymer intended for injection moulding. This grade is characterized by good flow properties and high stiffness in and is specially suitable for high-speed injection moulding of articles demanding easy flow.
Its very good organoleptic properties allows this grade to be used with any masterbatch without discoloring problems.
Applications
- House ware and thin wall packaging
- Articles with rather long and narrow flow lengths
Special Features
- Good flow behaviour
- High stiffness
|
Borealis PP HE370FB | África y Oriente Medio |
HE370FB is a polypropylene homopolymer intended for fibre applications
CAS-No.: 9003-07-0
Applications
HE370FB is recommended for:
Staple fibre for nonwoven
Special features
HE370FB is optimised to deliver:
- Easy processability
- Optimal product consistency
- Excellent spinning performance on low and high speed technologies
|
Borealis PP HF136MO | África y Oriente Medio |
HF136MO is a polypropylene homopolymer intended for injection moulding. This grade is characterized by a good combination of mechanical and flow properties.
This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage.
Applications
Caps and closures
|
Borealis PP HF420FB | África y Oriente Medio |
HF420FB is a polypropylene homopolymer intended for fibre applications.
|
Borealis PP HF700SA | África y Oriente Medio |
HF700SA is a polypropylene homopolymer intended for injection moulding.
This material has excellent balanced mechanical properties and is easy to process.
Applications
HF700SA has been developed especially for applications like:
- Household applications
Special Features
- UL registered under File E108112
- High heat stabilised
- Excellent flowability
- Excellent antistatic performance
|
Borealis PP HG313MO | África y Oriente Medio |
HG313MO is a polypropylene homopolymer intended for injection moulding. Its high melt flow makes it especially suitable for products with long flow length. This grad is designed for high-speed injection moulding and contains nucleating, antistatic and slip additives.
This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage. Products originating from this grade have very good demoulding and anti-static properties, high stiffness, good transparency and gloss, and good impact strength at ambient temperatures.
Applications
- Thin wall containers
- Square containers
- Rectangular and flat products, like lids and trays
- Caps and closures
Special features
- High stiffness
- High impact strength
- Excellent antistatic properties
- Improved gloss and excellent transparency
|
Borealis PP HG385MO | África y Oriente Medio |
HG385MO is a polypropylene homopolymer intended for injection moulding. This grade combines unique Borstar reactor design with Borealis Nucleation Technology (BNT) to produce highly-crystalline polypropylene. This product is characterized by excellent flow properties combined with a narrow molecular weight distribution well suited for low distortion products. This grade contains anti-static and slip additives, which result in short cycle time, good demoulding and low dust attraction.
Products moulded from this grade exhibit excellent dimension consistency combined with high stiffness.
Applications
- Caps and closures
- Items requiring good antistatic properties
Special Features
- High stiffness
- Excellent antistatic properties
|
Borealis PP HG430MO | África y Oriente Medio |
HG430MO is a polypropylene homopolymer intended for injection moulding. This polymer product is characterized by a superior impact resistance. This grade has ductile failure in falling weight impact test at room temperature. This product is characterized by excellent flow properties combined with a narrow molecular weight distribution well suited for low distortion products. This grade contains anti-static and slip additives, which result in short cycle time, good demoulding and low dust attraction.
Applications
- Caps and closures
- Items requiring good antistatic properties
Special features
- Good flow behaviour
- Excellent antistatic properties
|
Borealis PP HG455FB | África y Oriente Medio |
HG455FB is a polypropylene homopolymer intended for fibre applications
Applications
HG455FB is recommended for
- Fine filament count at high spinning speeds
- Spunbonded nonwovens
- POY production
Special features
- HG455FB is optimised to deliver:
Easy processability
- Anti-gasfading stabilisation
- Optimal product consistency
- Very good flow
- Controlled rheology
|
Borealis PP HG475FB | África y Oriente Medio |
HG475FB - is a polypropylene homopolymer intended for fibre applications
CAS-No.: 9003-07-0
Applications
HG475FB is recommended for:
- Fine filament count at high spinning speeds
- POY production
- Spunbonded nonwovens
Special features
HG475FB is optimised to deliver:
- Easy processability
- Very good flow
- Anti-gasfading stabilisation
- Controlled rheology
- Optimal product consistency
|
Borealis PP HH450FB | África y Oriente Medio |
HH450FB is a polypropylene homopolymer intended for fibre applications.
|
Borealis PP HJ120UB | África y Oriente Medio |
HJ120UB is a special low viscosity polypropylene homopolymer developed to fit the production of fibre reinforced thermoplastics.
Applications
HJ120UB has been developed especially for applications like:
- Under the bonnet components
- Noise shields
- Front end carriers
- Under body shieldings
- Dashboard carriers
- Battery supports
Special Features
HJ120UB This material contains basic stabilisation.
Low emission
|
Borealis PP HJ325MO | África y Oriente Medio |
HJ325MO is a polypropylene homopolymer intended for injection moulding. Its very high melt flow makes it especially suitable for thin-wall packaging and products with long flow length. is designed for high-speed injection moulding and contains nucleating and antistatic additives. The additives are optimized to provide reduced tendency for mould plate-out.
This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage. Components moulded from this grade show good ejectability and combine good stiffness with good transparency and gloss, good antistatic properties and good impact strength at ambient temperatures.
Applications
- Thin wall containers
- Square containers
- Rectangular and flat products, like lids and trays
- Caps and closures
Special features
- Good stiffness
- Good impact strength
- Excellent antistatic properties
- Improved gloss and excellent transparency
|
Borealis PP HK060AE | África y Oriente Medio |
HK060AE is a special low viscosity polypropylene homopolymer compound developed to fit the production of Glass Matt reinforced Thermoplastics. This material is also suitable as base resin for the production of PP-GF composites in the direct LFT compression and injection moulding process as well as in combination with LGF concentrates on the injection moulding process.
Applications
HK060AE has been developed especially for applications like:
- Front end carriers
- Dashboard carriers
- Under body shieldings
- Battery supports
- Noise shields
Special Features
HK060AE contains a basic conversion and long term heat stabilisation.
|
Borealis PP HL708FB | África y Oriente Medio |
HL708FB is a polypropylene homopolymer intended for fibre applications
CAS-No.: 9003-07-0
Applications
HL708FB is recommended for:
- Micro denier fibres at high spinning speeds
- Melt blown applications
Special features
HL708FB is optimised to deliver:
- Controlled rheology
- Very high flow
- Easy processability
- Perfect suitable for electrostatic charging
Optimal product consistency
|
Borealis PP HL712FB | África y Oriente Medio |
HL712FB is a polypropylene homopolymer intended for fibre applications
CAS-No.: 9003-07-0
Applications
HL712FB is recommended for:
- Micro denier fibres at high spinning speeds
- Melt blown applications
Special features
HL712FB is optimised to deliver:
- Controlled rheology
- Optimal product consistency
- Easy processability
- Very high flow
|
Borealis PP KSR4525 | África y Oriente Medio |
KSR4525 is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour.
This material has excellent balanced mechanical properties and gives a good surface quality.
Applications
KSR4525 has been developed especially for the car industry to be used in automotive exterior parts.
- Bumpers
- Exterior trims
Special Features
- UV stabilised
|
Borealis PP MB350WG | África y Oriente Medio |
MB350WG is a 30% mineral filled polypropylene compound intended for injection moulding.
This material has a very high impact strength while maintaining good stiffness and is easy to process.
Applications
MB350WG has been developed especially for applications like:
- Washing machine parts
- Dishwashers components
Special Features
- Long term high heat stabilised
- Detergent resistant
- UL registered under File E108112
- Excellent dimensional stability
|
Borealis PP MB352WG | África y Oriente Medio |
MB352WG is a 30% mineral filled polypropylene compound intended for injection moulding.
Applications
MB352WG has been developed especially for applications like:
- Washing machine parts
- Dishwashers components
Special Features
- Excellent stiffness and impact balance
- UL registered under File E108112
- Excellent dimensional stability
|
Borealis PP MB471WG | África y Oriente Medio |
MB471WG is a 40% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and is easy to process.
Applications
MB471WG has been developed especially for applications like:
- Dishwashers components
- Washing machine parts
Special Features
- Long term high heat stabilised
- Detergent resistant
- UL registered under File E108112
- Excellent dimensional stability
|
Borealis PP MD206U | África y Oriente Medio |
MD206U is a 20% mineral filled polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness and gives a good surface quality.
Applications
MD206U has been developed especially for applications like:
- Door panels and pockets
- Other automotive parts
- Cowl vent grilles
Special Features
- UV stabilised
|
Borealis PP MD231U | África y Oriente Medio |
MD231U is a 20% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and a medium melt flow rate.
Applications
MD231U is designed for:
- Air ducts
- Air conditioning parts
- Air filters
- Automotive under the bonnet parts
Special Features
- Long term high heat stabilised
- High dimensional stability
- UL registered under File E108112
- Low shrinkage
|
Borealis PP MD360HP | África y Oriente Medio |
MD360HP is a 30% mineral filled polypropylene compound intended for injection moulding.
Applications
MD360HP has been developed especially for exterior applications needing good UV resistance:
- Exterior applications in the construction and building industry
- Exterior automotive parts
|
Borealis PP MD441AI | África y Oriente Medio |
MD441AI is a 40% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and a medium melt flow rate.
Applications
MD441AI is designed for:
- Air conditioning parts
- Automotive interior applications
- Heater housings
Special Features
- Excellent dimensional stability
- Low shrinkage
- Excellent high purity
|
Borealis PP MD441U | África y Oriente Medio |
MD441U is a 40% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and a medium melt flow rate.
Applications
MD441U is designed for:
- Air conditioning parts
- Under the bonnet components
- Heater housings
Special Features
- Long term high heat stabilised
- UL registered under File E108112
- Excellent dimensional stability
- Low shrinkage
|
Borealis PP MD494WG | África y Oriente Medio |
MD494WG is a 40% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and a medium melt flow rate.
|