供給可能

E121562 - SABIC INNOVATIVE PLASTICS US L L C

Télécharger le document

ラテンアメリカ, 北アメリカ

Material Handling

CHRYSLER MS-DB-400 CPN2512 Color: Black

• Coefficient of Thermal Expansion vs. Temperature (ASTM E831)
• Elastic Modulus vs. Temperature (ASTM D4065)
• Flexural DMA (ASTM D5023)
• Instrumented Impact (Energy) (ASTM D3763)
• Instrumented Impact (Load) (ASTM D3763)
• Shear DMA (ASTM D4065)
• Specific Heat vs. Temperature (ASTM E1269)
• Specific Volume vs. Temperature (PVT)
• Tensile Creep (ASTM D2990)
• Tensile Fatigue
• Tensile Stress vs. Strain (ASTM D638)
• Thermal Conductivity vs. Temperature (ASTM E1530)
• Viscosity vs. Shear Rate (ASTM D3835)

Also Available In, Density / Specific Gravity, Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 23C/50RH, Tensile Modulus, Tensile Modulus, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Stress, Flexural Strength at Yield, Flexural Strength at Break, Taber Abrasion Resistance, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Instrumented Dart Impact, Rockwell Hardness, Rockwell Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, Vicat Softening Temperature, Ball Pressure Test, CLTE, Flow (TMA), Coefficient of Linear Thermal Expansion, Flow, CLTE, Transverse (TMA), Coefficient of Linear Thermal Expansion, Transverse, Thermal Conductivity, RTI Elec, RTI Imp, RTI Str, Surface Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Electric Strength, Dielectric Constant, Relative Permittivity, Dissipation Factor, Dissipation Factor, Arc Resistance, Comparative Tracking Index (CTI), Comparative Tracking Index, High Voltage Arc Resistance to Ignition (HVAR), Flame Rating, Glow Wire Flammability Index, Oxygen Index, Additional Properties, Drying Temperature, Drying Time, Suggested Max Moisture, Suggested Shot Size, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Back Pressure, Screw Speed, Vent Depth, Injection Notes