Polyester (Polyester): Copolyester
Produit | Disponibilité | Description du produit |
---|---|---|
Akestra™ 100 | Europe |
Akestra™ is a sparkling glass-like, heat resistant polyester that enables optimization and diversification of PET packaging production lines.
Akestra™ is a sustainable material that enables food serving in a new, safe and visually appealing container that also improves brand security as brand owners can feel 100% secure in serving their products in Akestra™ packaging.
Akestra™ 100 offers a unique combination of good mechanical properties and higher heat resistance in the Akestra range. Akestra™ 100 is suitable for injection, injection blow moulding and extrusion but can also be used in co-extrusion and co-injection with PET. With a HDT that is 5°C above Akestra™ 90 and with higher mechanical flexibility and impact resistance then Akestra™ 110, Akestra™ 100 is in many applications the best choice.
|
Akestra™ 110 | Europe |
Akestra™ is a sparkling glass-like, heat resistant polyester that enables optimization and diversification of PET packaging production lines.
Akestra™ is a sustainable material that enables food serving in a new, safe and visually appealing container that also improves brand security as brand owners can feel 100% secure in serving their products in Akestra™ packaging.
Akestra™ is the ultimate solution in the applications witth the highest demand when it comes to heat resistance in the Akestra range. Akestra™ 110 works excellent by its own in extrusion, injection and injection blow moulding but can also be used together with for example recycled PET in co-extrusion or co-injection to create a A/B/A structure (80% R-PET, 20% Akestra™ 110) giving a material, based on 80% recycled material with excellent transparency and a heat resistance up to 85°C ideal for hotfil and hot food serving applications.
|
Akestra™ 90 | Europe |
Akestra™ is a sparkling glass-like, heat resistant polyester that enables optimization and diversification of PET packaging production lines.
Akestra™ is a sustainable material that enables food serving in a new, safe and visually appealing container that also improves brand security as brand owners can feel 100% secure in serving their products in Akestra™ packaging.
Akestra™ 90 offers the best value in terms of mechanical properties for both cold and hot application, in the Akestra™ range. Still at a heat resistance superior to PET, as HDT is 11°C above PET. Akestra™ 90 also offers many opportunities as performance boosting additive as it is fully mixable with PET and PC without compromising with transparency.
|
ALCOLOR® FUNCTION HTC UV A WT3057-09 | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Colour
white
Thermal Stability Colourant
280 °C max.
Light Fastness Colourant
blue woolscale 8
For Use In
High Temperature Copolyester
Special Features
free from cadmium, lead and diarylide pigments
Typical Applications
various
Dosage
3,0 % extrusion
3,0 % injection moulding
|
ALCOLOR® HTC FC BK5015-16 | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Colour
black, similar to RAL 9017
Thermal Stability Colourant
270 °C max.
Light Fastness Colourant
blue woolscale 7
For Use In
High Temperature Copolyester
Special Features
free from cadmium, lead and diarylide pigments, dust-free, high dispersibility
Market Segment
building and construction, sport and leisure
Application Area
blow moulded parts, extruded parts, injection moulded parts
Dosage
2,0 % extrusion
2,0 % injection moulding
dependant on wall thickness and required colour intensity
dependant on application and operational area
|
ALCOLOR® HTC FC BL3019-13TR | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Colour
blue, transparent
Thermal Stability Colourant
300 °C max.
Light Fastness Colourant
blue woolscale 8
For Use In
High Temperature Copolyester
Special Features
free from cadmium, lead and diarylide pigments, dust-free, high dispersibility
Market Segment
Medical / Personal Care
Application Area
injection moulded parts, blow moulded parts, extruded parts
Dosage
6,0 % extrusion
6,0 % injection moulding
dependant on wall thickness and required colour intensity
dependant on application and operational area
|
ALCOLOR® HTC FC BN5047-15TR | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Colour
brown, transparent
Thermal Stability Colourant
280 °C max.
Light Fastness Colourant
blue woolscale 8
For Use In
High Temperature Copolyester
Special Features
food contact
Market Segment
food processing industry, Medical / Personal Care
Application Area
blow moulded parts, extruded parts, injection moulded parts
Dosage
2,0 % extrusion
2,0 % injection moulding
dependant on wall thickness and required colour intensity
|
ALCOLOR® HTC FC GY3067-12TR | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Colour
grey
Thermal Stability Colourant
300 °C max.
Light Fastness Colourant
blue woolscale 8
For Use In
High Temperature Copolyester
Special Features
free from cadmium, lead and diarylide pigments, dust-free, high dispersibility, high additive content
Market Segment
electrical and electronic, Furniture, building and construction, sport and leisure, food processing industry
Application Area
injection moulded parts, blow moulded parts, extruded parts
Dosage
2,0 % extrusion
2,0 % injection moulding
dependant on application and operational area
|
ALCOLOR® HTC FC RD5003-19TR | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Colour
red
Thermal Stability Colourant
280 °C max.
Light Fastness Colourant
blue woolscale 7
For Use In
High Temperature Copolyester
Special Features
free from cadmium, lead and diarylide pigments, dust-free, high dispersibility, high additive content
Market Segment
electrical and electronic, Furniture, building and construction, sport and leisure, food processing industry
Application Area
injection moulded parts, blow moulded parts, extruded parts
Dosage
2,0 % extrusion
2,0 % injection moulding
dependant on application and operational area
|
ALCOLOR® HTC FC WT3167-11TL | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Colour
white, translucent
Thermal Stability Colourant
300 °C max.
Light Fastness Colourant
blue woolscale 8
For Use In
High Temperature Copolyester
Special Features
free from cadmium, lead and diarylide pigments, dust-free, high dispersibility
Market Segment
building and construction, sport and leisure
Application Area
injection moulded parts, blow moulded parts, extruded parts
Dosage
3 % extrusion
3 % injection moulding
dependant on wall thickness and required colour intensity
dependant on application and operational area
|
ALCOLOR® HTC FC WT5051-16 | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Colour
white
Thermal Stability Colourant
300 °C max.
Light Fastness Colourant
blue woolscale 7
For Use In
High Temperature Copolyester
Special Features
free from cadmium, lead and diarylide pigments, dust-free, high dispersibility
Market Segment
electrical and electronic, Furniture, building and construction, sport and leisure
Application Area
injection moulded parts, blow moulded parts, extruded parts
Dosage
2 % extrusion
2 % injection moulding
dependant on wall thickness and required colour intensity
dependant on application and operational area
|
ALCOM® HTC 300/1 GY1055-10LD | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Filler/Additive System
special filler
Special Features
translucent, light scattering, high light diffusion
Market Segment
Automotive, Lighting
Application Area
lighting, light transparent components
Typical Applications
lamp covers, display elements, operating elements
|
ALCOM® HTC 300/1 WT1056-10LD | Amérique du Nord |
Base Polymer
High Temperature Copolyester
Filler/Additive System
special filler
Special Features
light scattering, high light diffusion
Market Segment
Automotive, Lighting
Application Area
lighting, light transparent components
Typical Applications
lamp covers, display elements, operating elements
|
AuroraTec™ 2012 | Afrique & Moyen-Orient |
Polyester Copolymer
Formerly known as EnCounter 2012
|
AuroraTec™ 2016 | Afrique & Moyen-Orient |
Polyester Copolymer
Formerly known as EnCounter 2016
|
AuroraTec™ 212HFU | Afrique & Moyen-Orient |
Polyester Copolymer
Formerly known as EnCounter 212HFU
|
AuroraTec™ 22016U | Afrique & Moyen-Orient |
UV resistant Polyester Copolymer
Formerly known as EnCounter 22016U
|
AuroraTec™ 22116 | Afrique & Moyen-Orient |
BPA Free Polyester Copolymer
Formerly known as EnCounter 22116
|
AuroraTec™ 22116U | Afrique & Moyen-Orient |
UV resistant, BPA Free Polyester Copolymer
Formerly known as EnCounter 22116U
|
AuroraTec™ ENV24-NC850 | Afrique & Moyen-Orient |
Injection Molding Grade, High Clarity in Natural or Light Tints, BPA Free, Excellent Impact Toughness, Good Mold Release, Hydrolytically Stable, Good Chemical and Heat Resistance, FDA Food Contact/REACH/RoHS 2 Compliant
NC060 = To Be Assigned 5 Digit Number Indicating Natural, FDA Black or Custom Color.
The ENV17 Series Products Are Available With Mold Release.
Formerly known as ENVIROCLEAR® ENV24-NC850
|
AuroraTec™ PET3001 | Afrique & Moyen-Orient |
Polyester Copolymer
Formerly known as EnCounter 3001
|
AUX 4501 | Afrique & Moyen-Orient |
AUXIVA's AUX 4501 is an injection grade clear or custom color amorphous copolyester. Excellent toughness, heat and chemical resistance. FDA and RoHS Compliant.
|
AUX 4505 | Afrique & Moyen-Orient |
AUXIVA's AUX 4505 is a high flow, injection grade clear, tint, or custom color amorphous copolyester. Excellent toughness, heat and chemical resistance. FDA Compliant.
|
BONDFAST® VC-40 | Afrique & Moyen-Orient | |
BONDZ™ BO 035 | Amérique du Nord |
Selenis Bondz BO 035 is a copolyester specifically designed for sealing layers in BOPET films. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, securing full protection of the final product.
Selenis Bondz BO 035 greatly improves your converting steps, such as laminating, metalizing and printing.
Selenis Bondz BO 035 is a crystallised copolyester resin that is easy to process even on single-screw extruders. Selenis Bondz BO 035 must be dried at the same temperatures as crystalline polyesters.
|
BONDZ™ BO 075 | Amérique du Nord |
Selenis Bondz BO 075 is a copolyester specifically designed for sealing layers in BOPET films and delivers a slow rate of crystallisation. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, securing full protection of the final product.
Selenis Bondz BO 075 greatly improves your converting steps, such as laminating, metalizing and printing.
Selenis Bondz BO 075 is an amorphous copolyester resin dedicated to twin-screw extrusion. When using this kind of equipment, no drying is required prior to extrusion.
|
BONDZ™ BO 144 | Amérique du Nord |
Selenis Bondz BO 144 is a copolyester specifically designed for sealing layers in BOPET films and delivers an extremely slow rate of crystallisation. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, securing full protection of the final product.
Selenis Bondz BO 144 greatly improves your converting steps, such as laminating, metalizing and printing.
Selenis Bondz BO 144 is an amorphous copolyester resin dedicated to twin-screw extrusion. When using this kind of equipment, no drying is required prior to extrusion.
|
BONDZ™ BO 244 | Amérique du Nord |
Selenis Bondz BO 244 is a copolyester specifically designed for sealing layers in BOPET films and inhibits crystallisation. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, securing full protection of the final product.
Selenis Bondz BO 244 greatly improves your converting steps, such as laminating, metalizing and printing.
Selenis Bondz BO 244 is an amorphous copolyester resin dedicated to twin-screw extrusion, where no drying is required prior to extrusion.
|
BONDZ™ CA 124 | Amérique du Nord |
Selenis Bondz CA 124 is a copolyester specifically designed for sealing layers in CPET coextruded films. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, from coextrusion to thermoforming, securing full protection of the final product.
Selenis Bondz CA 124 greatly improves your film, providing enhanced printability, effortless trimming and easier thermoformability; hence boosting your energy efficiency.
As an outside coextruded layer, Selenis Bondz CA 124 enhances the optics of your CPET trays, thanks to its superior clarity. This solution ensures good adhesion level, while maintaining high clarity and gloss of the sealing layer, certifying optimal visual appeal at point of sale.
|
BONDZ™ CA 248 | Amérique du Nord |
Selenis Bondz CA 248 is a copolyester specifically designed for sealing layers in CPET coextruded films. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, from coextrusion to thermoforming, securing full protection of the final product.
Selenis Bondz CA 248 greatly improves your film, providing enhanced printability, effortless trimming and easier thermoformability; hence boosting your energy efficiency.
As an outside coextruded layer, Selenis Bondz CA 248 enhances the optics of your CPET trays, thanks to its superior clarity. This solution ensures exceptional adhesion level, while maintaining high clarity and gloss of the sealing layer, certifying optimal visual appeal at point of sale.
|
BONDZ™ GG 700 | Amérique du Nord |
Selenis Bondz GG 700 is a high viscosity copolyester specifically designed for sealing layers in GAG coextruded films. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, from coextrusion to thermoforming, securing full protection of the final product.
Selenis Bondz GG 700 greatly improves your film, providing enhanced printability, effortless trimming and easier thermoformability; hence boosting your energy efficiency.
Selenis Bondz GG 700 may be used as a primary or secondary packaging material for thermoformed trays, blister applications, and form-fill-seal applications up to 75°C.
Selenis Bondz GG 700 guarantees no crystalline haze; thereby assuring your film will be crystal-clear. This solution ensures exceptional adhesion level, while maintaining high clarity and gloss, certifying optimal visual appeal at point of sale.
|
BONDZ™ HF 048 | Amérique du Nord |
Selenis Bondz HF 048 is a copolyester specifically designed for sealing layers in APET coextruded films. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, from coextrusion to thermoforming, securing full protection of the final product.
Selenis Bondz HF 048 greatly improves your film, providing enhanced printability, effortless trimming and easier thermoformability; hence boosting your energy efficiency.
Selenis Bondz HF 048 may be used as a primary or secondary packaging material for thermoformed trays, blister applications, and form-fill-seal applications up to 75°C.
Selenis Bondz HF 048 guarantees no crystalline haze; thereby assuring your film will be crystal-clear. This solution ensures exceptional adhesion level, while maintaining high clarity and gloss, certifying optimal visual appeal at point of sale.
|
Cadence™ GS2 | Afrique & Moyen-Orient |
Eastman Cadence™ GS2 is a clear copolyester resin specifically for calendered film applications including decorative laminates, general purpose packaging, transaction and identification cards, and protective films. It has adequate processing ease.
Film producers looking to replace PVC and other materials of concern choose Cadence for its ease of processing, low-temperature toughness, and the ability to be downgauged – all of which help reduce cost. It has a wide calendering and thermoforming window, which enables Cadence to be used on most existing calendering lines and thermoforming equipment with little or no modification. Eastman Cadence™ resins require no pre-drying or additional stabilizers.
Brand owners prefer Cadence for its premium appearance, excellent toughness, and environmentally responsible track record. It is crystal clear, has excellent resistance to common household cleaners, and resists curling, delaminating, and yellowing when exposed to heat.
Cadence GS2 may be used in various food contact applications under the U.S. Food & Drug Administration (FDA) regulations.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
This product has received a Platinum level Material Health Certificate from the Cradle to Cradle Products Innovation Institute. A Material Health Certificate is awarded to products that meet the Material Health requirements of the multi-attribute Cradle to Cradle Certified™ Product Standard. The Cradle to Cradle Products Innovation Institute is a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard, which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in the Material Health Certificate Registry.
Key Attributes
- Adequate processing ease (For better processing ease, choose - Cadence™ GS3 or GS5)
- Excellent forming characteristics
- Low VOC emissions (indoor air quality)
- Not a material of concern
- PVC alternative
- Resistant to common household cleaning agents
- Resists curling, delaminating, and yellowing when exposed to heat
- Runs on existing calendering and thermoforming equipment
- Scratch resistant
- Wide calendering window
Applications
- Building materials
- Decorative laminates-metal
- Decorative laminates-wood
- Doors
- Flooring
- Furniture
- Packaging component films
- Packaging components non food contact
- Protective & performance film
- Transaction cards
- Walls
- Wood furniture
|
Cadence™ GS3 | Afrique & Moyen-Orient |
Eastman Cadence™ GS3 is a clear copolyester resin specifically for calendered film applications including decorative laminates, general purpose packaging, transaction and identification cards, and protective films. It has enhanced processing ease and higher melt strength compared to Cadence™ GS2.
Film producers looking to replace PVC and other materials of concern choose Cadence™ for its ease of processing, low-temperature toughness, and the ability to be downgauged – all of which help reduce cost. It has a wide calendering and thermoforming window, which enables Cadence™ to be used on most existing calendering lines and thermoforming equipment with little or no modification. Eastman Cadence™ resins require no pre-drying or additional stabilizers.
Brand owners prefer Cadence™ for its premium appearance, excellent toughness, and environmentally responsible track record. It is crystal clear, has excellent resistance to common household cleaners, and resists curling, delaminating, and yellowing when exposed to heat.
Eastman Cadence™ GS3 may be used in various food contact applications under the U.S. Food & Drug Administration (FDA) regulations.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
This product has received a Platinum level Material Health Certificate from the Cradle to Cradle Products Innovation Institute. A Material Health Certificate is awarded to products that meet the Material Health requirements of the multi-attribute Cradle to Cradle CertifiedTM Product Standard. The Cradle to Cradle Products Innovation Institute is a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard, which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in the Material Health Certificate Registry.
Key Attributes
- Enhanced processing ease (For superior processing ease, choose Cadence™ GS5)
- Excellent forming characteristics
- High melt strength
- Low VOC emissions (indoor air quality)
- Not a material of concern
- PVC alternative
- Resistant to common household cleaning agents
- Resists curling, delaminating, and yellowing when exposed to heat
- Runs on existing calendaring and thermoforming equipment
- Scratch resistant
- Wide calendering window
Applications
- Building materials
- Decorative laminates-metal
- Decorative laminates-wood
- Doors
- Flooring
- Furniture
- Packaging component films
- Packaging components non food contact
- Protective film
- Transaction cards
- Walls
- Wood furniture
|
Cadence™ GS5 | Afrique & Moyen-Orient |
Eastman Cadence™ GS5 is the top-of-the-line copolyester resin for calendered film applications including decorative laminates, general purpose packaging, transaction and identification cards, and protective films. It has superior processing ease and speed compared to Cadence™ GS2 and GS3.
Film producers looking to replace PVC and other materials of concern choose Cadence™ for its ease of processing, low-temperature toughness, and the ability to be downgauged – all of which help reduce cost. It has a wide calendering and thermoforming window, which enables Cadence™ to be used on most existing calendering lines and thermoforming equipment with little or no modification. Eastman Cadence™ resins require no pre-drying or additional stabilizers.
Brand owners prefer Cadence™ for its premium appearance, excellent toughness, and environmentally responsible track record. It is crystal clear, has excellent resistance to common household cleaners, and resists curling, delaminating, and yellowing when exposed to heat.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
This product has received a Platinum level Material Health Certificate from the Cradle to Cradle Products Innovation Institute. A Material Health Certificate is awarded to products that meet the Material Health requirements of the multi-attribute Cradle to Cradle Certified™ Product Standard. The Cradle to Cradle Products Innovation Institute is a nonprofit organization that administers the publicly available Cradle to Cradle Certified™ Product Standard, which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in the Material Health Certificate Registry.
Key Attributes
- Best processing ease and speed compared to Cadence™ GS2 and GS3.
- Excellent forming characteristics
- Low VOC emissions (indoor air quality)
- Not a material of concern
- PVC alternative
- Resistant to common household cleaning agents
- Resists curling, delaminating, and yellowing when exposed to heat
- Runs on existing calendering and thermoforming equipment
- Scratch resistant
- Wide calendering window
Applications
- Building materials
- Decorative laminates-metal
- Decorative laminates-wood
- Doors
- Flooring
- Furniture
- Packaging component films
- Packaging components non food contact
- Protective film
- Transaction cards
- Walls
- Wood furniture
|
ColorRx® PET-1000RX | Afrique & Moyen-Orient |
PET-1000RX is an injection molding grade of amorphous copolyester with high clarity and good melt strength. It is suitable for healthcare applications and sterilizable by EtO and gamma radiation.
|
Cristal™ 400 | Afrique & Moyen-Orient |
Cristal™ 400 copolyester is a high flow product. It is designed and engineered specifically for cosmetics packaging applications. With its unsurpassed color and clarity and an unmatched ability to mold thick parts with improved gate aesthetics, Cristal™ is clearly a well suited copolyester for premium cosmetics packaging. Other outstanding features of Cristal™ are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. Cristal™ is also ideally suited for two-shot molding techniques due to its lower processing temperatures, very slow crystallization rate, and flow characteristics.
This product has received a Platinum level Material Health Certificate from the Cradle to Cradle Products Innovation Institute. A Material Health Certificate is awarded to products that meet the Material Health requirements of the multi-attribute Cradle to Cradle CertifiedTM Product Standard. The Cradle to Cradle Products Innovation Institute is a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard, which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in the Material Health Certificate Registry.
Key Attributes
- Ability to mold thick parts
- Ease of processing
- Easy to extrude, cut, decorate, and seal
- Excellent chemical resistance
- Excellent clarity and color
- Excellent colorability
- Good impact strength
- Good stiffness
- High gloss appearance
- Improved gate aesthetics
- Readily fill intricate molds
- Toughness
Applications
- Bottles-skin care pkg
- Closures-fragrance pkg
- Color cosmetics packaging
- Fragrance packaging
- Jars-skin care pkg
- Personal care & cosmetics packaging
- Personal care bottles
- Skin care packaging
|
Cristal™ 401 | Amérique du Nord |
Cristal™ 401 copolyester is a high flow product that contains mold release for ease of ejection. It is designed and engineered specifically for cosmetics packaging applications. With its unsurpassed color and clarity and an unmatched ability to mold thick parts with improved gate aesthetics, Cristal™ is clearly a well suited copolyester for premium cosmetics packaging. Other outstanding features of Cristal™ are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. Cristal™ is also ideally suited for two-shot molding techniques due to its lower processing temperatures, very slow crystallization rate, and flow characteristics.
Key Attributes
- Ability to mold thick parts
- Ease of processing
- Easy to extrude, cut, decorate, and seal
- Excellent clarity and color
- Excellent colorability
- Good impact strength
- Good stiffness
- High gloss appearance
- Improved gate aesthetics
- Readily fill intricate molds
- Toughness
Applications
- Bottles-fragrance pkg
- Bottles-skin care pkg
- Closures-fragrance pkg
- Color cosmetics packaging
- Fragrance packaging
- Jars-skin care pkg
- Personal care & cosmetics packaging
- Personal care packaging
- Skin care packaging
|
Cristal™ DN500 | Afrique & Moyen-Orient |
Eastman DN500 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, DN500 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. DN500 is also ideally suited for two-shot molding techniques due to its lower processing temperatures, very slow crystallization rate, and flow characteristics.
Key Attributes
- Ability to mold thick parts
- Ease of processing
- Easy to extrude, cut, decorate, and seal
- Excellent clarity and color
- Excellent colorability
- Good impact strength
- Good stiffness
- High gloss appearance
- Improved gate aesthetics
- Readily fill intricate molds
- Toughness
Applications
- Cabinetry
- Caps & lids non-food contact
- Decorative interiors
- Displays/in-store fixtures
- Fibers
- Furniture
- Graphic arts
- Indoor signs
- Industrial
- Lighting
- Point-of-purchase
- Transaction cards
- Visual merchandising
- Wood furniture assembly
|
Cristal™ DN501 | Afrique & Moyen-Orient |
Eastman DN501 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, DN501 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. DN501 is also ideally suited for two-shot molding techniques due to its lower processing temperatures, very slow crystallization rate, and flow characteristics. Eastman DN501 contains a mold release derived from vegetable based sources.
Key Attributes
- Ability to mold thick parts
- Ease of processing
- Easy to extrude, cut, decorate, and seal
- Excellent clarity and color
- Excellent colorability
- Good impact strength
- Good stiffness
- High gloss appearance
- Improved gate aesthetics
- Readily fill intricate molds
- Toughness
Applications
- Appliances (food contact)
- Cabinetry
- Caps & lids non-food contact
- Chocolate molds
- Consumer housewares - food contact (FC)
- Decorative interiors
- Displays/in-store fixtures
- Fibers
- Furniture
- Graphic arts
- Indoor signs
- Industrial
- Lighting
- Point-of-purchase
- Transaction cards
- Visual merchandising
- Wood furniture assembly
|