Polyamide (Nylon): ナイロン 66+ナイロン 6I/6T
製品 | 可用性 | 製品の説明 |
---|---|---|
AKROLOY® PA M 40 black (6541) | アジア太平洋地域 |
AKROLOY® PA M 40 black (6541) is a 40% mineral-filled, semi-aromatic polyamide blend with very good surface and slight tendency to warp even in conditioned state.
AKROLOY® PA is very well suited for dimensionally accurate control elements and electronic components with optimum surface properties.
|
AKROLOY® PA M 40 natural (2972) | アジア太平洋地域 |
AKROLOY® PA M 40 natural (2972) is a 40% mineral-filled, semi-aromatic polyamide blend with very good surface and slight tendency to warp even in conditioned state.
AKROLOY PA reflex very grad for dimensionally accurate control elements and electronic components with optimum surface properties.
|
Creamid® A2H7G12.2S*9207/2 | アジア太平洋地域 | |
Creamid® A2H7GX10.2S*9207/2 | アジア太平洋地域 | |
Creamid® A3H2G10.2S*9001 | アジア太平洋地域 | |
Creamid® A3H2G10.2S | アジア太平洋地域 |
Creamid® A3H2G10.2S is a high flow, 50% glass fiber reinforced semi-aromatic polyamide (PA) designed for injection molding; primarily in metal replacement. This material provides an excellent surface finish, retains properties after moisture absorption, and is available globally.
|
Creamid® A3H2G12.2S | アジア太平洋地域 |
Creamid® A3H2G12.2S is a high flow, 60% glass fiber reinforced semi-aromatic polyamide (PA) designed for injection molding; primarily in metal replacement. This material provides an excellent surface finish, retains properties after moisture absorption, and is available globally.
|
Creamid® A3H2G8.2FRS*9200 | アジア太平洋地域 | |
Creamid® A3H2G8.2S*9001 | アジア太平洋地域 | |
Creamid® A3H7G10.2S*9217 | アジア太平洋地域 | |
Creamid® A3H7G12.0S.1*9000 | 欧州 | |
Creamid® A3H7G12.2S*9217 | アジア太平洋地域 | |
Creamid® A3H7G4.2S*9217 | アジア太平洋地域 | |
Creamid® A3H7G6.2S*9217 | アジア太平洋地域 | |
Creamid® A3H7G8.2S*9217 | アジア太平洋地域 |
Creamid® A3H7G8.2S is a high flow, 40% glass fiber reinforced semi-aromatic polyamide (PA) designed for injection molding; primarily in metal replacement. This material provides an excellent surface finish, retains properties after moisture absorption, and is available globally.
|
Edgetek™ PA-50GF/000 BK004 | アジア太平洋地域 |
Glass Fiber Reinforced PPA Compound.
|
Generic Nylon 66+Nylon 6I/6T - Glass Fiber | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic Nylon 66+Nylon 6I/6T - Glass Fiber
This information is provided for comparative purposes only.
|
Generic Nylon 66+Nylon 6I/6T | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic Nylon 66+Nylon 6I/6T
This information is provided for comparative purposes only.
|
InStruc® PA66PA6IGF40 | アジア太平洋地域 |
40% GLASS FIBER REINFORCED, NYLON 6/6 + NYLON 6I/6T
|
InStruc® PA66PA6IGF40HS | アジア太平洋地域 |
40% GLASS FIBER REINFORCED, HEAT STABILIZED NYLON 6/6 + NYLON 6I/6T
|
InStruc® PA66PA6IGF50HS | アジア太平洋地域 |
50% GLASS FIBER REINFORCED, HEAT STABILIZED NYLON 6/6 + NYLON 6I/6T
|
InStruc® PA66PA6IGF60 | アジア太平洋地域 |
60% GLASS FIBER REINFORCED NYLON 6/6 + NYLON 6I/6T
|
InStruc® PA66PA6IGF60HS | アジア太平洋地域 |
60% GLASS FIBER REINFORCED, HEAT STABILIZED NYLON 6/6 + NYLON 6I/6T
|
SCHULAMID® XM GF 35 BLACK | 欧州 |
35% glassfiber reinforced semi-aromatic Polyamide Compound with excellent rigity and strength, also if conditioned.
|
SCHULAMID® XM GF 50 BLACK | 欧州 |
50% glassfiber reinforced semi-aromatic Polyamide Compound with excellent rigity and strength, also if conditioned. Able for Substitution Die Cast Metal.
|
TEREZ GT3 300 H G30 TF15 | 欧州 |
PA66 blend with panially aromatic content, 30% glass fiber reinforcement and PTFE modifcation.
For molded pans with high demands on strength and tribology.
|
TEREZ GT3 300 H G30 W | 欧州 |
PA66 blend with partially aromatic content, 30% glass fibre reinforcement and heat stabilization. This Product is suitable for drinking water contact / coldwater.
For all kind of injection moulding parts with high requirements to stiffness which a drinking water approval is needed.
|
TEREZ GT3 300 H G40 W | 欧州 |
PA66 blend with partially aromatic content, 40% glass fibre reinforcement and heat stabilization. This Product is suitable for drinking water contact / coldwater.
For all kind of injection moulding parts with high requirements to stiffness which a drinking water approval is needed.
|
TEREZ GT3 300 H G50 W | 欧州 |
PA66 blend with partially aromatic content, 50% glass fibre reinforcement and heat stabilization. This Product is suitable for drinking water contact / coldwater.
For all kind of injection moulding parts with high requirements to stiffness which a drinking water approval is needed.
|
TEREZ GT3 300 H G60 W | 欧州 |
PA66 blend with panially aromatic content, 60% glass fibre reinforcement and heat stabilization. This Product is suitable for drinking water contact / coldwater.
For all kind of injection moulding parts with high requirements to stiffness which a drinking water approval is needed.
|
TEREZ GT3S 300 H G30 | 欧州 |
PA66 blend with partially aromatic content, 30% glass fibre reinforced, heat stabilization as well as reduced density.
For all kind of injection moulding parts with high requirements to stiffness with a density advantage.
|
TEREZ GT3S 300 H G40 | 欧州 |
PA66 blend with partially aromatic content, 40% glass fibre reinforced, heat stabilization as well as reduced density.
For all kind of injection moulding parts with high requirements to stiffness with a density advantage.
|
TEREZ GT3S 300 H G50 | 欧州 |
PA66 blend with partially aromatic content, 50% glass fibre reinforced, heat stabilization as well as reduced density.
For all kind of injection moulding parts with high requirements to stiffness with a density advantage.
|
TEREZ GT3S 300 H G60 | 欧州 |
PA66 blend with partially aromatic content, 60% glass fibre reinforced, heat stabilization as well as reduced density.
For all kind of injection moulding parts with high requirements to stiffness with a density advantage.
|
TEREZ GT3X 300 H G30 TF15 | 欧州 |
Partially aromatic PA66 blend with 30% glass fiber proportions and heat stabilized. The product tends to reduced warpage and has improved flow characteristics.
For injection-moulded components with high requirements to isotropic strength properties.
|
TEREZ GT3X 300 H G40 | 欧州 |
Partially aromatic PA66 blend with 40% glass fiber proportions and heat stabilized. The product tends to reduced warpage and has improved flow characteristics.
For injection-moulded components with high requirements to isotropic strength properties.
|
TEREZ GT3X 300 H G50 | 欧州 |
Partially aromatic PA66 blend with 50% glass fiber proportions and heat stabilized. The product tends to reduced warpage and has improved flow characteristics.
For injection-moulded components with high requirements to isotropic strength properties.
|
TEREZ GT3X 300 H G60 | 欧州 |
Partially aromatic PA66 blend with 60% glass fiber proportions and heat stabilized. The product tends to reduced warpage and has improved flow characteristics.
For injection-moulded components with high requirements to isotropic strength properties.
|