50% Mineral/Glass reinforced, low warpage, good surface, V-0 Fortron 6850L6 offers the lowest warpage available. The easy flowing nature allows this product to be injection molded into thin walled applications. The excellent balance of mineral and glass fibers result in a superior heat resistance and dimensional stability. This grade is inherently flame-retardant along with high hardness and rigidity. Especially used for thin walled by unfavorable flow length-wall thickness ratio. This is the most isotropic grade available.

Fiberglass reinforced with high melt strength for blow molding & extrusion applications Fortron® 9115L0 is a 15% fiberglass-reinforced grade of polyphenylene sulfide with high melt strength suitable for blow molding and extrusion applications.

40% Glass reinforced PPS, low flash, V-0 Fortron 9141L4Â is a 40% glass-reinforced PPS that has excellent heat and chemical resistance, inherently flame-retardant, high hardness and a good balance of strength and stiffness. This grade exhibits low flash and is typically used in applications with thicker walls and shorter flow lengths.

FORTRON® CES 6145 LCG is a glass fiber and mineral reinforced grade with low Chlorine content. It offers excellent physical properties and good flowability for consumer electronics applications.

20% glass filled Fortron CES51 N is a 20% glass reinforced PPS resin in black. It offers excellent physical properties and good adhesion to metal with nano molding technology treatment.

20% glass filled Fortron CES51 is a 20% glass reinforced PPS resin with low chlorine content. It offers excellent physical properties and good adhesion to metal with nano molding technology treatment.

Fortron® SKX-734 is an impact modified, injection moldable grade. *Preliminary Data Sheet Fortron FX32T4 is an impact modified, injection moldable grade. The mechanical properties reported on this data sheet refer to a mold wall temperature of 135 deg C.

Fortron FX32T4L is an impact modified; injection moldable grade. It is a lubricated version of FX32T4 Fortron FX32T4L is an impact modified, injection moldable grade. It is a lubricated version of FX32T4

Fortron® FX40T1 is an unreinforced, impact-modified high toughness poly(phenylene sulfide)

Unreinforced, impact-modified extrusion grade. Fortron FX4382T1 is an impact-modified, unreinforced, extrusion/injection molding grade offering high tensile elongation.

15% glass filled, toughened, injection molding grade Fortron® FX515T1 is a 15% glass filled, impact modified PPS grade with good impact resistance suitable for injection molding and food contact applications

30% glass filled, impact modiied, Â injection moldiing PPS FORTRON(R)Â FX530T4 is a 30% glass filled, impact modified grade for injection molding with good thermal shock resistance

Impact modified PPS Fortron® FX55T1 is an unreinforced, impact-modified poly(phenylene sulfide) with high melt viscosity suitable for extrusion.

Fortron FX650T6 is a 50% glass-fiber and mineral reinforced grade with improvedimpact and heat shock resistance. Fortron FX650T6 is a 50% glass-fiber and mineral reinforced grade with improvedimpact and heat shock resistance.

unreinforced impact modified PPS for injection molding Fortron® FX72T6 is an unreinforced, impact modified PPS with high flowability and high impact resistance suitable for injection molding. The mechanical properties reported on this data sheet refer to a mold wall temperature of 135°C.

unfilled impact modified PPS for extrusion Fortron® FX75T1 is an unreinforced, impact-modified poly(phenylene sulfide) with high melt viscosity suitable for extrusion.

30% Glass reinforced, excellent flow, good weldability, V-0 Fortron HY 1130L4 is a 30% glass-reinforced PPS that has excellent heat and chemical resistance. It offers extremely low ion leaching and is especially suitable for hydrogen related applications. It is inherently flame-retardant and exhibits high hardness and a good balance of strength and stiffness. Especially used for thin walled parts requiring long flow lengths. This grade also exhibits excellent weldability in secondary operations due to its low filler content.

40% Glass reinforced, strong and tough, V-0 Fortron HY 1140L4 is a 40% glass-reinforced grade that is the strongest and toughest product available. It offers extremely low ion leaching properties and is especially suitable for hydrogen industry. It also has the excellent heat and chemical resistance, good electrical properties and is inherently flame-retardant. The high hardness and rigidity at elevated temperatures allows for good load bearing performance. This product has good weldability due to the modest filler level. Applications made of this grade are electronical components (i.e. bobbins, lamp housings, brush holders) and various other components requiring strength and resistance to aggressive chemicals (i.e. automotive heaters, pumps, valves, fuel rails, microwave oven rings and distillation column packings).

40% Glass-filled, improved crystallization FORTRON ICE 504L is a 40% glass fiber reinforced polyphenylene sulfide, that belongs to our new generation of Fortron® PPS. This new technology allows optimization of molding conditions with faster cycle times. Due to the faster crystallization of the material at a higher temperature, the option of mold wall temperature reduction can be subject of advanced process optimization. The potential for optimization of Fortron® ICE by cycle time reduction is possible by standard cavity surface temperatures of 140°C. The potential for lowering the mold temperature must be checked individually and it depends on process and part design. Â

Fast crystallizing, 40% glass-filled, easy flow FORTRON ICE 506L is a 40% glass fiber reinforced polyphenylene sulfide of high flowability, that belongs to our new generation of Fortron® PPS. This new technology allows optimization of molding conditions with faster cycle times. Due to the faster crystallization of the material at a higher temperature, the option of mold wall temperature reduction can be subject of advanced process optimization. The potential for optimization of Fortron® ICE by cycle time reduction is possible by standard cavity surface temperatures of 140°C. The potential for lowering the mold temperature must be checked individually and it depends on process and part design. Â

Fast Crystallizing 65% glass/mineral filled FORTRON ICE 716A is a 65% glass fiber-mineral reinforced polyphenylene sulfide, that belongs to our new generation of Fortron® PPS. This new technology allows optimization of molding conditions with faster cycle times. Due to the faster crystallization of the material at a higher temperature, the option of mold wall temperature reduction can be subject of advanced process optimization. The potential for optimization of Fortron® ICE by cycle time reduction is possible by standard cavity surface temperatures of 140°C. The potential for lowering the mold temperature must be checked individually and it depends on process and part design. Â

65% Glass/Mineral filled, improved crystallization FORTRON ICE 716L is a 65% glass fiber-mineral reinforced polyphenylene sulfide with improved mechanical properties, that belongs to our new generation of Fortron® PPS. This new technology allows optimization of molding conditions with faster cycle times. Due to the faster crystallization of the material at a higher temperature, the option of mold wall temperature reduction can be subject of advanced process optimization. The potential for optimization of Fortron® ICE by cycle time reduction is possible by standard cavity surface temperatures of 140°C. The potential for lowering the mold temperature must be checked individually and it depends on process and part design. Â

Fortron LM1140L4 is a 40% glass-reinforced grade that is the strongest and toughest product available. It is laser markable. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently flame-retardant. The high hardness and rigidity at elevated temperatures allows for good load bearing performance. This product has good weldability due to the modest filler level. Applications made of this grade are electronical components (i.e. bobbins, lamp housings, brush holders) and various other components requiring strength and resistance to aggressive chemicals (i.e. automotive heaters, pumps, valves, fuel rails, microwave oven rings and distillation column packings).

40% Glass reinforced PPS, medical & food handling applications, medium flow FORTRON® MT9140L4 SF3001Â (natural) is a 40% glass fiber reinforced injection molding grade that exhibits excellent heat and chemical resistance, inherent flame retardancy, and high hardness and rigidity at elevated temperatures. FORTRON® MT9140L4 SF3001Â (natural) is a special grade developed for medical industry applications and complies with: Food Contact Substance Notification (FCN) No. 40 of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 14844) and the Device Master File (MAF 1097) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products Components made of this grade may be used for medical and food handling applications.

40% Glass reinforced, medical & food handling applications, easy flow, strong & tough FORTRON® MT9140L6 SF3001Â (natural) is a 40% glass fiber reinforced injection molding grade with a low melt viscosity. FORTRON® MT9140L6 SF3001Â (natural) is a special grade developed for medical industry applications and complies with: Food Contact Substance Notification (FCN) No. 40 of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 14844) and the Device Master File (MAF 1097) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products It exhibits excellent heat and chemical resistance, inherent flame retardancy and shows high hardness and rigidity at elevated temperatures. Fortron MT9140L6 is used for thin walled parts with long flow lengths. Components made of this grade may be used for medical, dental, pharmaceutical, and certain food handling applications.

This data represents typical values that have been calculated from all products classified as: Generic PPS - Aramid Fiber This information is provided for comparative purposes only.

This data represents typical values that have been calculated from all products classified as: Generic PPS - Carbon Fiber This information is provided for comparative purposes only.

This data represents typical values that have been calculated from all products classified as: Generic PPS - Glass Fiber\Mineral This information is provided for comparative purposes only.

This data represents typical values that have been calculated from all products classified as: Generic PPS - Glass Fiber This information is provided for comparative purposes only.

This data represents typical values that have been calculated from all products classified as: Generic PPS - Mineral This information is provided for comparative purposes only.

This data represents typical values that have been calculated from all products classified as: Generic PPS - Unspecified This information is provided for comparative purposes only.

This data represents typical values that have been calculated from all products classified as: Generic PPS This information is provided for comparative purposes only.

Molding Parameters: The dry temperature at 16 hours is 250°F. For 2-zone machines, the rear temperature is 600-640°F, and the front temperature is 580-600°F.